Schneider Electric Power Supplies

Schneider Electric 140CPS42400C

Power Supply Module

Manufacturer: Schneider Electric Part Number: 140CPS42400C

Genuine surplus Schneider Electric 140CPS42400C power supply — verified condition, tested, ready to ship from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Input Voltage 48–60 V DC
Output Voltage 5.1 V DC
Output Current 8 A redundant
Hold-up Time 13 ms @ 48 V
Fuse Rating 2 A time-lag
Input Current ≤ 3.8 A
Inrush Current 14 A @ 40 V
Alarm Output 1 NC, 6 A @ 220 V
Power Dissipation 17.2 W
Marking CE

Description

The Schneider Electric 140CPS42400C is a Modicon Quantum power supply module that converts 48–60 V DC input to a steady 5.1 V DC output. Maintenance and procurement teams choose genuine surplus or refurbished units for this exact model because verified condition and clear lead times beat waiting on OEM backorders. Autronexa supplies tested, traceable stock.

What This Module Does in a Quantum System

The 140CPS42400C sits in the Modicon Quantum backplane and delivers regulated 5.1 V DC power to the modules sharing that rack. Its input range of 48–60 V DC suits DC-bus plant environments where AC feeds are not practical. A 2 A time-lag fuse protects against short circuits, while internal overload and overvoltage protection reduce the risk of damage from supply transients. The module holds output for 13 ms at 48 V, covering brief input interruptions without dropping the backplane. A green PWR OK LED gives local status at a glance, and a 1 NC alarm output rated 6 A at 220 V can signal abnormal conditions to a monitoring circuit. With 8 A redundant output current, the unit supports fail-safe configurations where a single supply failure must not stop the rack. Power dissipation is 17.2 W, so panel thermal planning should account for that heat load. The CE marking confirms conformity with European safety and performance standards.

Figure 1: Front view of the Schneider Electric 140CPS42400C Power Supply Module showing its physical design and enclosure.

Why Genuine Surplus Fits This Power Supply

Quantum racks often run well beyond their original commissioning date, and OEM lead times for legacy power supplies can stretch. A refurbished unit from Autronexa is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships. You get a genuine Schneider Electric unit with traceable markings, not a grey-market copy. For maintenance managers holding spares budgets, surplus and refurbished stock offers cost savings versus OEM list price without sacrificing authenticity. Because this module carries internal protection and a defined hold-up time, condition verification matters more than cosmetic appearance — our team checks the alarm output and LED function as part of the verification. If your rack needs a drop-in replacement quickly, surplus stock is often the practical route.

Figure 2: Technical layout and connection details for the Schneider Electric 140CPS42400C Power Supply Module.

Buyer’s Checklist Before You Order

Confirm the exact part number and revision match your existing Quantum rack, since power supply variants in this family are not interchangeable. Decide whether you need surplus, refurbished, or new condition — Autronexa lists the actual condition per unit. Verify that your backplane load stays within the 8 A redundant output current and that your DC input falls inside the 48–60 V DC range. Check that the 1 NC alarm output can be wired to your existing monitoring scheme. If you are unsure about compatibility, send your rack configuration and current module list to our sourcing team for a cross-check. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is this a genuine Schneider Electric 140CPS42400C, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference. We supply genuine surplus and refurbished Schneider Electric modules, not copies.

What condition will the 140CPS42400C arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa for the specific condition of current stock.

How fast can you ship the 140CPS42400C?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability.

Does this module work with my existing Modicon Quantum rack?

The 140CPS42400C is a Modicon Quantum power supply module with 48–60 V DC input and 5.1 V DC output. Confirm your rack revision and load with Autronexa before ordering.

Is the 140CPS42400C still supported by Schneider Electric?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and availability before you commit.

Related & compatible parts

Schneider Electric

140DIO33000C

Genuine surplus Schneider Electric 140DIO33000C intrinsically safe discrete output module — verified condition, ready to ship.

In Stock

Schneider Electric

LC1G2254KUEN

Genuine surplus Schneider Electric LC1G2254KUEN contactor — 4-pole, 330A AC-1, wide-band coil, verified and ready to ship.

In Stock

Schneider Electric

BMEH582040S

Genuine surplus Schneider BMEH582040S SIL3 Hot Standby CPU — verified condition, faster than OEM lead time, sourcing help…

In Stock

Schneider Electric

TSXP571634

Genuine surplus Schneider Electric TSXP571634 Unity Processor — verified, refurbished, with 512 discrete and 24 analogue I/O capacity.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 140CPS42400C

We reply within one business day.

140CPS42400C Quote reply within 1 business day