Schneider Electric I/O & Function Modules

Schneider Electric 140DAI74000

VAC discrete input modules

Manufacturer: Schneider Electric Part Number: 140DAI74000

Genuine surplus Schneider Electric 140DAI74000: 16-channel 230 V AC discrete input module for Modicon Quantum, verified and ready to source.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Discrete input number 16
Discrete input voltage 230 V AC
Input current 11.5 mA 57...63 Hz; 9.7 mA 47...53 Hz
Network frequency limits 47…63 Hz
Isolation 1780 Vrms for 1 minute (channel-to-channel and channel-to-bus)
Bus current requirement 180 mA
Maximum power dissipation 5.5 W
Operating temperature 32…140 °F (0…60 °C)
Net weight 0.77 lb(US) (0.35 kg)

Description

When a 230 V AC field signal needs to reach a Modicon Quantum controller, the input module is the single point of failure that stops the whole rack from seeing field status. The Schneider Electric 140DAI74000 is a 16-channel VAC discrete input module built for exactly that job, and Autronexa supplies it as verified surplus so you avoid OEM lead time on a part that is often pulled from service rather than ordered new.

What This Module Does in a Quantum Rack

The 140DAI74000 sits in the Modicon Quantum automation platform and presents 16 discrete inputs as one input word to the CPU. Each channel accepts 230 V AC, drawing 11.5 mA at 57…63 Hz or 9.7 mA at 47…53 Hz, with a capacitive input impedance of 26500 Ohm in the 57…63 Hz band. On-state is guaranteed from 165…264 V AC at 57…63 Hz, and off-state is guaranteed from 0…40 V AC, so the module tolerates the voltage sag and noise typical of AC control circuits. The part carries 1780 Vrms isolation between channels and between channels and the bus, and draws 180 mA from the backplane while dissipating a maximum of 5.5 W. Front-panel LEDs show bus activity, external fault, and per-channel input status.

Figure 1: Front view of the Schneider Electric 140DAI74000 VAC discrete input modules showing its physical design and enclosure.

Why Buy This Part as Surplus

Quantum racks stay in service long after the original spares budget closes, and AC input modules are among the first cards pulled when a panel is upgraded. That makes tested surplus the practical route: our team verifies each unit against OEM datasheet markings and functionally checks it before it ships, so you get a genuine part with known condition rather than an untested pull. Compared with waiting on a factory order, surplus stock shortens the gap between fault and restart. Please verify current lifecycle status and availability with Autronexa before ordering.

Figure 2: Technical layout and connection details for the Schneider Electric 140DAI74000 VAC discrete input modules.

Matching the Right Variant

Before you commit, confirm the exact part number on the existing card, since Quantum input modules share a form factor across voltage classes. Check that your application runs at 230 V AC and that the 47…63 Hz network frequency limits fit the supply. The module is marked CE and certified to UL 508 and CSA C22.2 No 142, with FM Class 1 Division 2 approval, and it is rated for 0…60 °C operation and 95 % relative humidity without condensation. Confirm whether you need surplus or refurbished condition and ask about accessory and terminal compatibility at the same time. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: 140DAI74000-datasheet.pdf

Frequently asked questions

Is this a genuine Schneider Electric 140DAI74000 or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it is listed. The module you receive is a genuine Schneider Electric part, not a copy.

What condition will the 140DAI74000 arrive in?

Our default condition is refurbished: each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available on request.

How fast can you ship the 140DAI74000?

Lead time depends on current stock. Contact Autronexa for the current lead time and availability on this part number before placing your order.

Does this module work with a Modicon Quantum controller?

Yes. The 140DAI74000 is a Modicon Quantum VAC discrete input module that presents 16 inputs as one input word to the Quantum CPU, and it is supported by Concept, ProWORX 32 and Unity Pro software.

Is the 140DAI74000 still supported by Schneider Electric?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before you plan a replacement.

Related & compatible parts

Schneider Electric

BMXP3420302CL

Genuine surplus Schneider BMXP3420302CL processor module for Modicon M340 — verified condition, CANopen and Ethernet, ready to ship.

In Stock

Schneider Electric

140NOC78000C

Genuine surplus Schneider Electric 140NOC78000C Ethernet DIO module for Modicon Quantum — verified condition, faster than OEM lead…

In Stock

Schneider Electric

TM5SPS3

Genuine surplus Schneider Electric TM5SPS3 power distribution module for Modicon TM5 — verified condition, ready to ship.

In Stock

Schneider Electric

ATV930U07N4

Genuine surplus ATV930U07N4 Altivar Process drive — dual ND/HD rating, STO safety, verified condition and clear lead times…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 140DAI74000

We reply within one business day.

140DAI74000 Quote reply within 1 business day