Schneider Electric I/O & Function Modules

Schneider Electric 140DDI36400

Low voltage dc discrete input modules

Manufacturer: Schneider Electric Part Number: 140DDI36400

Genuine surplus Schneider 140DDI36400: 96-point 24 V DC discrete input module for Modicon Quantum, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Discrete input number 96
Group of channels 6
Logic input Positive (sink)
Discrete input voltage 24 V DC
Input voltage limits 19.2...30 V
Response time <= 2 ms (0 to 1); <= 3 ms (1 to 0)
Input impedance 6700 Ohm
Bus current requirement 270 mA
Net weight 0.3 kg

Description

When a Modicon Quantum rack needs a high-density input card, the Schneider Electric 140DDI36400 low voltage dc discrete input module delivers 96 points across six isolated groups. Maintenance teams and integrators choose genuine surplus or refurbished units to restore I/O capacity without waiting on OEM lead times or paying full list price. Autronexa verifies each module against OEM datasheet markings before it ships.

What This Input Module Does in a Quantum System

The 140DDI36400 is a standard-format module for the Modicon Quantum automation platform. It accepts 24 V DC positive (sink) logic inputs and organizes them into six groups of channels, with 500 Vrms isolation between groups for one minute. Each group requires six words of addressing, so the full card consumes 36 words in the rack’s I/O map. Front-panel LEDs report bus communication (green), external fault (red), and per-point input status (96 green LEDs), which makes field troubleshooting practical without pulling the module. The card draws 270 mA from the bus and weighs 0.3 kg. Please verify current lifecycle status and availability with Autronexa before ordering.

Figure 1: Front view of the Schneider Electric 140DDI36400 Low voltage dc discrete input modules showing its physical design and enclosure.

Technical Specs That Matter on the Floor

Input thresholds determine whether a field device registers reliably. This module guarantees state 1 at 15…30 V DC and state 0 at 5 V DC, with minimum currents of 2.5 mA and 0.7 mA respectively. Input impedance is 6700 Ohm, and the absolute maximum input is 30 V continuous with a 50 V decaying pulse. Response time is <= 2 ms from state 0 to state 1 and <= 3 ms from state 1 to state 0, fast enough for most discrete sensing and interlock feedback. The operating range of 0…60 °C and 95 % relative humidity without condensation suits typical control cabinets. EMC immunity is rated 9.1 V/m (10 V/m) across 80…2000 MHz per IEC 801-3, and the module carries CE marking plus UL 508, CSA C22.2 No 142, FM Class 1 Division 2, and C-tick certifications.

Figure 2: Technical layout and connection details for the Schneider Electric 140DDI36400 Low voltage dc discrete input modules.

Surplus Advantage for This unit

Quantum installations often run well beyond their original design life, and a failed input card can idle an entire rack. OEM lead times for legacy I/O vary, and list prices reflect new-production channels. Autronexa stocks genuine surplus and refurbished units that are tested against OEM datasheet specifications and functionally verified by our sourcing team. Because these modules are already in circulation, availability is typically faster than factory order, and the cost is lower than new list. The trade-off is that condition and revision should be confirmed before purchase; our team can provide photos, markings, and test notes on request. For plants standardizing on the Quantum platform, keeping a verified spare on the shelf is practical risk management.

Sourcing Checklist Before You Buy

Confirm the exact model number and any revision suffix on your existing module, since Quantum racks may mix revisions. Decide whether you need surplus, refurbished, or new condition, and ask for the grading in writing. Verify that your application uses positive (sink) logic at 24 V DC, because this card is not a source-input variant. Check that your rack has 270 mA of bus current headroom and that the six-word-per-group addressing fits your I/O map. Finally, confirm the module format matches your chassis slot. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this 140DDI36400 a genuine Schneider Electric module or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before shipping. We source genuine surplus and refurbished modules, not grey-market copies.

What condition will the 140DDI36400 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units may also be available; contact us for current grading and photos.

How fast can you ship the 140DDI36400?

Lead time depends on current stock. Contact Autronexa for current lead time and availability; surplus and refurbished units are often ready to ship faster than factory order.

Does this module work with my existing Modicon Quantum rack?

The 140DDI36400 is a standard-format module for the Modicon Quantum platform with 24 V DC positive (sink) inputs. Confirm your rack has 270 mA bus current headroom and that six-word-per-group addressing fits your I/O map.

Is the 140DDI36400 still supported by Schneider Electric?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before ordering.

Related & compatible parts

Schneider Electric

140DAI54300

Genuine surplus Schneider Electric 140DAI54300 Modicon Quantum 16-point 115 V AC input module — verified condition, ready to…

In Stock

Schneider Electric

ATV310H075N4S

Genuine surplus Schneider ATV310H075N4S drive: 0.75 kW, 380–460 V three-phase, sensorless vector control, verified condition and clear lead…

In Stock

Schneider Electric

140NRP95400

Genuine surplus Schneider Electric 140NRP95400 fiber optic repeater — verified multi-mode unit with ST ports and LED status…

In Stock

Schneider Electric

170ADI54050

Genuine surplus Schneider Electric 170ADI54050 discrete input base for Modicon Momentum — 16 channels, 120V AC, verified and…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 140DDI36400

We reply within one business day.

140DDI36400 Quote reply within 1 business day