Schneider Electric Power Supplies

Schneider Electric BMXCPS2000

Power supply module

Manufacturer: Schneider Electric Part Number: BMXCPS2000

Genuine surplus Schneider Electric BMXCPS2000 power supply module for Modicon X80 — verified condition, practical lead times.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Range of product Modicon X80
Primary voltage 100...240 V
Supply circuit type AC
Secondary power 10.8 W 24 V DC sensor; 16.8 W 24 V DC I/O and processor; 8.3 W 3.3 V DC logic
Network frequency 50/60 Hz
Protection type Internal fuse (primary); overload, overvoltage, short-circuit (secondary)
IP degree of protection IP20
Net weight 0.3 kg
Ambient air temperature for operation 0…60 °C

Description

The Schneider Electric BMXCPS2000 is a power supply module for the Modicon X80 range, converting AC line supply into the DC rails that X80 I/O modules and processors need. Maintenance teams and automation engineers reach for genuine surplus or refurbished units when an OEM lead time would leave a rack idle. Autronexa supplies verified stock with practical turnaround.

What This Power Supply Does in an X80 Rack

The BMXCPS2000 accepts an AC supply circuit and delivers three secondary outputs: 10.8 W at 24 V DC for sensor power, 16.8 W at 24 V DC for I/O module power and the processor, and 8.3 W at 3.3 V DC for I/O module logic. In practical terms, one module feeds the sensor loop, the I/O backplane, and the logic rail together, which is why a failure takes the whole rack down rather than a single channel.

Primary voltage limits are 85…264 V, and network frequency limits are 47…63 Hz, so the unit tolerates the brownouts and frequency drift common on older plant supplies. Protection covers the secondary circuit against overload, overvoltage, and short circuit, and an internal fuse protects the primary. Two green status LEDs report rack voltage OK and sensor voltage, giving a technician a first-line diagnostic before any meter work. A RESET push-button provides cold restart. The module is not compatible with BMEXBP..02 backplanes, so confirm your backplane reference before ordering.

Figure 1: Front view of the Schneider Electric BMXCPS2000 Power supply module showing its physical design and enclosure.

Why Genuine Surplus Fits This Module

Power supplies are a high-wear item in any rack: they run continuously, carry inrush current at every energisation, and sit behind whatever thermal conditions the enclosure allows. That makes them one of the most frequently replaced X80 components, and one of the most commonly counterfeited. A refurbished unit from Autronexa is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships. You get genuine parts, verified, without waiting on a factory allocation.

Figure 2: Technical layout and connection details for the Schneider Electric BMXCPS2000 Power supply module.

Sourcing Checklist Before You Buy

Match the exact part number and confirm backplane compatibility — the BMEXBP..02 exclusion is the first thing to check. Decide whether your application needs surplus, refurbished, or new condition, and ask for the condition grade in writing. Verify the electrical connection points you need: the module provides a 2-pin alarm relay connector and a 5-pin connector for line supply, protective earth, and 24 V DC sensor input. Finally, confirm the operating environment: 0…60 °C ambient, IP20 protection, and operation up to 2000 m without derating. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: BMXCPS2000-datasheet.pdf

Frequently asked questions

Is this BMXCPS2000 a genuine Schneider Electric module or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. We supply genuine surplus and refurbished modules, not grey-market copies.

What condition will the BMXCPS2000 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available — ask for the condition grade in writing when you request a quote.

How fast can Autronexa ship the BMXCPS2000?

Lead time depends on current stock. Contact Autronexa with your part number and we will confirm verified condition and current availability, then quote a shipping date.

Is the BMXCPS2000 compatible with every Modicon X80 backplane?

No. The module is not compatible with BMEXBP..02 backplanes. Confirm your backplane reference before ordering, and our sourcing team can help you cross-check it.

Is the BMXCPS2000 still supported by Schneider Electric?

Lifecycle status is not stated in our current data. Contact Autronexa to verify OEM support status and availability before you commit to a replacement plan.

Related & compatible parts

Schneider Electric

BMXDDM16025

Genuine surplus BMXDDM16025 mixed I/O module — 8 DI + 8 relay DO, verified condition, faster than OEM…

In Stock

Schneider Electric

TM3AI8

Genuine surplus Schneider TM3AI8: 8-channel, 12-bit analog input module for Modicon M221/M241/M251/M262. Verified condition, ready to ship.

In Stock

Schneider Electric

BMXDDO1602

Genuine surplus BMXDDO1602 discrete output module — 16 outputs, 24 V DC, verified condition and faster lead time…

In Stock

Schneider Electric

STBNIP2212

Genuine surplus Schneider Electric STBNIP2212 Modbus TCP/IP network interface module — verified condition, sourcing help, faster than OEM…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: BMXCPS2000

We reply within one business day.

BMXCPS2000 Quote reply within 1 business day