Schneider Electric Cables & Connectors

Schneider Electric BMXFTB2010

Terminal blocks

Manufacturer: Schneider Electric Part Number: BMXFTB2010

Genuine surplus Schneider Electric BMXFTB2010 20-pin screw clamp terminal block for Modicon X80 — verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Range of product Modicon X80
Accessory / separate part type Removable connection block
Number of terminals 20 removable screw clamp terminal block
Accessory / separate part destination For module with 20-pin removable terminal block
Conductor size 1 or 2 x 0.34..1.5 mm²
Net weight 0.075 kg
Package 1 dimensions 3.600 cm x 4.600 cm x 11.000 cm
Package 2 quantity 60 units

Description

When a Modicon X80 module loses its removable terminal block, the entire I/O channel goes offline until a replacement arrives. The Schneider Electric BMXFTB2010 is a 20-pin removable screw clamp terminal block designed specifically for modules with a 20-pin interface. Sourcing a genuine surplus unit from Autronexa gets your panel back online without paying OEM list price or waiting weeks for factory lead time.

What the BMXFTB2010 Does in a Modicon X80 System

This unit is not a generic terminal strip — it is the removable connection block that mates with a specific 20-pin module header in the Modicon X80 range. Each of the 20 screw clamp terminals accepts one or two conductors sized 0.34 to 1.5 mm², giving technicians flexibility when landing field wiring from sensors, actuators, or signal loops. Because the block is removable, maintenance teams can pre-wire a spare block offline and swap it in during a scheduled outage rather than terminating wires live inside a crowded enclosure. The block weighs just 0.075 kg, so it adds negligible mechanical load to the module face. Autronexa stocks genuine surplus and refurbished units that have been inspected for terminal integrity and pin alignment before dispatch.

Figure 1: Front view of the Schneider Electric BMXFTB2010 Terminal blocks showing its physical design and enclosure.

Surplus Advantage: Why a Verified Removable Block Beats Waiting on Factory Allocation

Removable terminal blocks are among the most frequently lost or damaged accessories in a control cabinet — a dropped block, a cracked screw clamp, or a missing block from a decommissioned module can stall a whole I/O card. OEM factory allocation for accessory items often runs longer than for the main module, and list pricing on small accessories adds up when you need several. Autronexa’s surplus and refurbished stock gives you a practical alternative: each unit is checked against OEM datasheet specifications and functionally verified by our sourcing team. You get a genuine part with clear condition notes and a lead time that reflects real stock, not a factory queue. For maintenance managers standardising spare blocks across multiple X80 racks, this is the difference between a one-day fix and a month-long workaround.

Figure 2: Technical layout and connection details for the Schneider Electric BMXFTB2010 Terminal blocks.

Selection & Sourcing Guide: Matching the Right Block to Your Module

Before ordering, confirm three things. First, verify your module actually uses a 20-pin removable terminal block — This unit is dedicated to that interface and will not fit 12-pin or 40-pin modules. Second, check conductor sizing: the 0.34 to 1.5 mm² range covers most field wiring, but verify your wire gauge falls inside it. Third, decide between surplus and refurbished condition based on your spares policy; both are genuine, and Autronexa states condition clearly on every quote. Packaging data helps with logistics planning: single units ship as one piece at 3.6 × 4.6 × 11.0 cm, and bulk orders of 60 units fit a 15 × 30 × 40 cm carton weighing 6.058 kg. Please verify current lifecycle status and availability with Autronexa before ordering.

Comparison: unit vs. Alternative Sourcing Routes

Sourcing Route Authenticity Lead Time Cost vs. OEM List
Autronexa surplus/refurbished Verified genuine Stock-dependent, typically faster Below list
OEM new Guaranteed Factory allocation Full list price
Grey-market clone Unverified Variable Lowest, highest risk

Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this BMXFTB2010 a genuine Schneider Electric part or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before dispatch. The BMXFTB2010 we supply is genuine Schneider Electric, not a grey-market copy.

What condition will the BMXFTB2010 terminal block arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available — condition is stated clearly on every quote.

How fast can Autronexa ship the BMXFTB2010?

Lead time depends on current stock. Contact Autronexa with your required quantity for a confirmed lead time — surplus and refurbished units are typically ready to ship faster than OEM factory allocation.

Will this terminal block fit my Modicon X80 module?

The BMXFTB2010 is a 20-pin removable screw clamp block designed for Modicon X80 modules with a 20-pin removable terminal block interface. Confirm your module's pin count before ordering.

What wire sizes does the BMXFTB2010 accept?

Each of the 20 screw clamp terminals accepts one or two conductors sized 0.34 to 1.5 mm². Verify your field wiring gauge falls within this range before installation.

Related & compatible parts

Schneider Electric

140DDI15310

Genuine surplus Schneider Electric 140DDI15310 Modicon Quantum 32-point TTL 5V DC input module — verified condition, faster than…

In Stock

Schneider Electric

TM3AM6

Genuine surplus Schneider Electric TM3AM6 analog mixed module — 4 AI + 2 AO, 12-bit, verified condition and…

In Stock

Schneider Electric

BMEH586040

Genuine surplus Schneider BMEH586040 redundant processor for Modicon M580 — verified condition, faster lead times than OEM.

In Stock

Schneider Electric

TSXP57103M

Genuine surplus Schneider TSXP57103M PL7 processor with 32 Kwords RAM, 512 discrete I/O — verified condition, ready to…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: BMXFTB2010

We reply within one business day.

BMXFTB2010 Quote reply within 1 business day