Schneider Electric I/O & Function Modules

Schneider Electric TM3AM6

Module

Manufacturer: Schneider Electric Part Number: TM3AM6

Genuine surplus Schneider Electric TM3AM6 analog mixed module — 4 AI + 2 AO, 12-bit, verified condition and clear lead times from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Module type Analog mixed (4 AI + 2 AO)
Channels 4 analog inputs + 2 analog outputs
Signal type (inputs) 0-10 Vdc, ±10 Vdc, 0-20 mA, 4-20 mA (configurable per channel)
Signal type (outputs) 0-10 Vdc, ±10 Vdc, 0-20 mA, 4-20 mA (configurable per channel)
Resolution 12 bits (AI and AO)
Accuracy ±0.1% of full scale at 25 °C (±1% FS over temperature)
Isolation 1500 V AC between analog I/O and supply; 500 V AC between analog I/O and internal logic
Operating temperature 0...+55 °C
Dimensions (H×W×D) 90 × 23.6 × 70 mm

Description

The Schneider Electric TM3AM6 is a Modicon TM3 analog mixed module pairing four analog inputs with two analog outputs at 12-bit resolution, built for engineers expanding Modicon M221, M241, M251 and M262 platforms. Genuine surplus and refurbished units give you a verified alternative when OEM lead times stretch. Treat this module as the analog front end of a Modicon M2xx rack: four inputs accept 0-10 Vdc, ±10 Vdc, 0-20 mA or 4-20 mA per channel, and two outputs mirror the same configurable ranges. In practice that means one compact expansion covers a mixed measurement-and-control loop — for example, reading pressure transmitters on 4-20 mA while driving a proportional valve on 0-10 Vdc — without stacking separate input and output cards. At 12 bits on both directions, the module resolves the full configured span into fine enough steps for setpoint and feedback work, and the ±0.1% of full scale accuracy at 25 °C gives you a stated reference for loop calibration. Isolation is specified at 1500 V AC between analog I/O and supply and 500 V AC between analog I/O and internal logic, which matters when field wiring runs near drive cables. Diagnostics report channel, module and bus status, so a faulted channel is visible in the controller rather than inferred at the cabinet. The removable screw terminal block at 3.81 mm pitch keeps rewiring practical during commissioning. ## Sourcing This Module as Genuine Surplus The Modicon TM3 family is active, and this module’s lifecycle entry is Active, last verified 2026-09 — so the question is rarely whether the part exists, but how quickly a verified unit reaches your panel. Autronexa holds surplus and refurbished stock of Schneider Electric TM3 modules, and each unit is checked against OEM datasheet markings and part-number cross-reference before it is listed. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team, so the 12-bit resolution, the four input and two output channels and the isolation ratings you specified are confirmed on the bench, not assumed from a label. For a maintenance engineer holding a stopped M241 line, that verification step is the difference between a module that powers up and one that holds accuracy across the operating range of 0…+55 °C. ## Matching the Module to Your Rack Before you order, confirm three things. First, the platform: this module is listed for Modicon M221, M241, M251 and M262 controllers, so check your CPU against that list rather than assuming TM3 compatibility across the range. Second, the channel plan: decide which of the four inputs run current loops and which run voltage, because each channel is configured independently and the wiring follows that choice. Third, the electrical budget: the module draws 50 mA at 5 V DC and 50 mA at 24 V DC at full load through the TM3 bus, so verify the bus supply headroom on your rack. Physically it measures 90 × 23.6 × 70 mm and weighs 0.11 kg, with an IP20 protection rating suited to cabinet mounting. Please verify current lifecycle status and availability with Autronexa before ordering, and send your exact part number so we can confirm condition and lead time against current stock.

Figure 1: Front view of the Schneider Electric TM3AM6 Module showing its physical design and enclosure.

Figure 2: Technical layout and connection details for the Schneider Electric TM3AM6 Module.

📄 Download Datasheet: TM3AM6-datasheet.pdf

Frequently asked questions

Is this a genuine Schneider Electric TM3AM6, or a copy?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before listing. We supply genuine surplus and refurbished Schneider Electric modules, not clones.

What condition will the TM3AM6 arrive in?

Units ship in the condition stated on the listing — our default is Refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Confirm the exact condition with us before ordering.

How fast can you ship the TM3AM6?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; surplus and refurbished units are ready to ship once confirmed.

Does this module work with my Modicon M241 controller?

The data lists compatibility with Modicon M221, M241, M251 and M262 platforms. Confirm your CPU model against that list before ordering.

Is the TM3AM6 still supported by Schneider Electric?

The lifecycle entry is Active, last verified 2026-09. Contact Autronexa to confirm current OEM support status alongside your order.

Related & compatible parts

Schneider Electric

140CPU53414UC

Genuine surplus Schneider Electric 140CPU53414UC CPU Module — verified condition, Modicon Quantum Unity processor, ready to ship.

In Stock

Schneider Electric

140CRA93100C

Genuine surplus Schneider 140CRA93100C adapter module for Modicon Quantum — supports 27 I/O modules, verified condition, ready to…

In Stock

Schneider Electric

140DDO84300

Genuine surplus Schneider 140DDO84300 Modicon Quantum 16-output DC module, verified and ready for sourcing.

In Stock

Schneider Electric

ABE7H16R21

Genuine surplus Schneider Electric ABE7H16R21 16-channel sub-base, verified and ready to ship from Autronexa.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TM3AM6

We reply within one business day.

TM3AM6 Quote reply within 1 business day