Schneider Electric I/O & Function Modules

Schneider Electric TM5ACTB12PS

Terminal Block

Manufacturer: Schneider Electric Part Number: TM5ACTB12PS

Genuine Schneider Electric TM5ACTB12PS 12-pin spring terminal block for Modicon TM5 — verified surplus stock, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Module type Terminal block (accessory)
Channels 12 pins
Wiring Spring-cage terminal, 12-pin
Operating temperature 0...+55 °C
Storage temperature -25...+70 °C
Protection rating IP20
Compatible platforms Modicon M241, M251, M258, LMC058
Lifecycle Active (Last verified: 2026-09)

Description

The Schneider Electric TM5ACTB12PS is a 12-pin spring-cage terminal block for Modicon TM5 I/O modules, and maintenance teams turn to genuine surplus stock when a wiring point fails mid-shift and the OEM channel cannot deliver quickly. This accessory is a passive part, so its reliability depends on the spring contacts and housing rather than electronics, which makes verified condition the deciding factor.

What This Terminal Block Does in a TM5 System

The TM5ACTB12PS is a field-wiring interface, not an active module. It seats onto a TM5 I/O slice and gives each of its 12 pins a spring-cage termination point, so technicians can land sensor and actuator conductors without screw terminals. Because the block is passive, it carries no supply voltage, bus current, or diagnostics of its own — the host module handles all signal processing. In practice, this means a failed terminal block rarely shows up as a module fault; it appears as an intermittent connection, a loose conductor, or a pin that no longer grips. Keeping a spare on the shelf shortens the repair window considerably. The part is rated for 0…+55 °C operation and -25…+70 °C storage, with an IP20 protection rating suited to cabinet-interior mounting.

Figure 1: Front view of the Schneider Electric TM5ACTB12PS Terminal Block showing its physical design and enclosure.

Compatibility Across the Modicon Range

The terminal block is listed as compatible with Modicon M241, M251, M258, and LMC058 platforms, where it serves as the terminal accessory for TM5 modules. Before ordering, confirm the host slice model and revision, because terminal accessories are matched to specific module widths and pin counts. The 12-pin spring-cage layout must align with the module’s terminal assignment; a block from a different slice will not seat correctly. If your installation mixes TM5 slices across these controllers, note the exact module reference alongside the terminal block part number when you request a quote, and our sourcing team will cross-check the pairing against the datasheet.

Figure 2: Technical layout and connection details for the Schneider Electric TM5ACTB12PS Terminal Block.

Why Genuine Surplus Fits This Part

Terminal blocks are high-wear accessories: they are removed during module swaps, re-terminated during panel modifications, and stressed by repeated conductor insertion. A refurbished unit that has been inspected for spring tension and housing integrity is a practical alternative to waiting on a factory order. Autronexa supplies genuine surplus and refurbished components, with each unit checked against OEM datasheet specifications and functionally verified before dispatch. The lifecycle status is active, last verified in September 2026, so the part remains a current platform accessory rather than an obsolete item. That said, please verify current lifecycle status and availability with Autronexa before ordering, since stock levels on accessories move quickly. For maintenance planners, holding one or two verified spares removes the terminal block from the critical-path list during a module replacement.

Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: TM5ACTB12PS-datasheet.pdf

Frequently asked questions

Is this a genuine Schneider Electric TM5ACTB12PS, or a compatible copy?

Autronexa supplies genuine Schneider Electric units. Each terminal block is checked against OEM datasheet markings and the part-number cross-reference before it is listed, so the 12-pin spring-cage configuration matches the original specification.

What condition will the terminal block arrive in?

Units ship in refurbished condition as the site default. Each block is inspected for spring-cage tension and housing integrity, then functionally verified by our sourcing team before dispatch.

How fast can you ship the TM5ACTB12PS?

Lead time depends on current stock. Contact Autronexa for the present lead time and availability; surplus and refurbished units are typically ready to ship once verified.

Does this terminal block work with Modicon M241 and M251 controllers?

The datasheet lists compatibility with Modicon M241, M251, M258, and LMC058 platforms as a TM5 module terminal accessory. Confirm your host slice model and revision before ordering.

Is the TM5ACTB12PS still supported by Schneider Electric?

Lifecycle status is listed as active, last verified in September 2026. Contact Autronexa to confirm current OEM support status and availability before ordering.

Related & compatible parts

Schneider Electric

ATV610U07N4

Genuine surplus Schneider ATV610U07N4 drive, 0.75 kW, 380...460 V, with C3 EMC filter — verified condition and practical…

In Stock

Schneider Electric

490NAA27101

Genuine surplus Schneider Electric 490NAA27101 Modbus Plus trunk cable, 1 m — verified condition, ready to ship from…

In Stock

Schneider Electric

BMENOS0300

Genuine surplus BMENOS0300 switch module for Modicon X80 — verified condition, faster lead times than OEM.

In Stock

Schneider Electric

TSXCDP203

Genuine surplus Schneider Electric TSXCDP203 2m HE10 connecting cable for Modicon PLCs — verified condition, ready to ship.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TM5ACTB12PS

We reply within one business day.

TM5ACTB12PS Quote reply within 1 business day