Schneider Electric Power Supplies

Schneider Electric TSXASY800

Analog output module

Manufacturer: Schneider Electric Part Number: TSXASY800

Genuine surplus Schneider Electric TSXASY800 analog output module — 8 channels, verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Number of Analog Output Channels 8
Output Type Current 0...20 mA, 4...20 mA; Voltage +/- 10 V
Analog/Digital Conversion 13 bits + sign +/- 10 V; 13 bits 0...20 mA; 13 bits 4...20 mA
Conversion Time 5 ms
Electrical Connection 1 SUB-D 25 connector
Isolation (channels to bus / ground) 1000 Vrms
Power Supply 24 V DC; 200 mA at 5 V DC, 300 mA at 24 V DC
Operating Temperature 32…140 °F (0…60 °C)
IP Degree of Protection IP20

Description

When a Modicon Premium line loses analog output control, every hour of downtime compounds. The Schneider Electric TSXASY800 analog output module restores eight channels of current or voltage control to the process, and Autronexa supplies it as genuine surplus with verified condition rather than OEM lead time.

What This Module Does in a Premium Rack

The TSXASY800 is an analog output module for the Modicon Premium automation platform. It provides eight output channels, each configurable for current or voltage duty, and connects through a single SUB-D 25 connector. The module carries short-circuit and overload protection on its outputs, with output voltage limited to <= 30 V. Engineers specifying load conditions should note the published impedance boundaries: 1000 Ohm for +/- 10 V voltage duty. Isolation between channels and bus, and between channels and ground, is rated 1000 Vrms, which matters in racks where mixed signals share a backplane. The unit runs from a 24 V DC supply and draws 300 mA at 24 V DC alongside 200 mA at 5 V DC.

Figure 1: Front view of the Schneider Electric TSXASY800 Analog output module showing its physical design and enclosure.

Why Surplus Fits This Module

Premium platform users often face long replacement paths when a single output card fails. A genuine surplus unit keeps the rack populated without waiting on a factory build slot. Autronexa sources these modules from decommissioned systems and verifies each one against OEM datasheet markings and part-number cross-reference before it enters stock. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. The module carries CE marking and a UL 508 listing, and its shipping weight is roughly 465 g, so it moves on standard freight without special handling. For maintenance teams holding a spare-parts budget, surplus and refurbished stock is a practical route to keeping the line running.

Figure 2: Technical layout and connection details for the Schneider Electric TSXASY800 Analog output module.

Sourcing Checks Before You Order

Confirm three things before committing. First, verify the exact part number and connector style match your rack position — this unit uses the 1 SUB-D 25 connector. Second, confirm your field wiring falls inside the published load limits, since an output driven outside 1000 Ohm will not perform to specification. Third, decide whether surplus or refurbished condition suits the duty cycle; both are verified, and the difference is documented at quote. Please verify current lifecycle status and availability with Autronexa before ordering, as Premium platform support changes over time. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric TSXASY800, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. The module is supplied as genuine surplus, not a grey-market copy.

What condition will the TSXASY800 arrive in?

Units ship in the condition stated at quote — surplus or refurbished. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team.

How fast can you ship the TSXASY800?

Contact Autronexa for current lead time. Stocked surplus and refurbished units are ready to ship once condition and availability are confirmed against your order.

Does the TSXASY800 work with the Modicon Premium platform?

Yes — the module is listed for the Modicon Premium automation platform and connects through a 1 SUB-D 25 connector. Confirm your rack position and field wiring load limits before installation.

Is the TSXASY800 still supported by Schneider Electric?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before ordering.

Related & compatible parts

Schneider Electric

BMXCPS3500

Genuine surplus Schneider Electric BMXCPS3500 Modicon X80 power supply — 36 W, 100-240 V AC input, verified condition…

In Stock

Schneider Electric

ABE7H16S43

Genuine surplus Schneider Electric ABE7H16S43 16-channel input sub-base — verified condition, faster lead time than OEM.

In Stock

Schneider Electric

TSXMRPC001M

Genuine surplus Schneider TSXMRPC001M SRAM memory for TSX Micro PLCs — verified condition, 192–1024 kB capacity, ready to…

In Stock

Schneider Electric

TWDLMDA20DRT

Genuine surplus Schneider TWDLMDA20DRT Twido modular base controller — 20 I/O, 24 V DC, verified and ready to…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TSXASY800

We reply within one business day.

TSXASY800 Quote reply within 1 business day