Schneider Electric I/O & Function Modules

Schneider Electric TSXCANCB100

CANopen cable

Manufacturer: Schneider Electric Part Number: TSXCANCB100

Genuine surplus Schneider Electric TSXCANCB100 CANopen cable, 100 m, IP20, UL. Verified condition and clear lead times from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Range of Product CANopen
Bus Type CANopen
Accessory Type Connecting cable
Cable Length 328.08 ft (100 m)
IP Degree of Protection IP20
Product Certifications UL
Flame Rating IEC 60332-2
Product Weight 17.28 lb(US) (7.84 kg)
Country of Origin IT

Description

When a CANopen bus run needs a single continuous 100 m cable, splicing shorter lengths introduces impedance mismatches and intermittent faults that are hard to trace. The Schneider Electric TSXCANCB100 CANopen standard cable solves this by delivering a full 100 m reel, IP20 rated and UL recognized, so integrators can wire a complete bus segment without joints. For maintenance and procurement teams, sourcing this exact cable as genuine surplus means verified condition and faster availability than waiting on factory lead times.

What This Cable Does on a CANopen Bus

The TSXCANCB100 is a connecting cable built for CANopen bus destinations. Its 100 m length supports long trunk runs between controllers and distributed I/O or drives, reducing the need for repeaters in moderate layouts. The cable carries CE marking and meets IEC 60332-2 flame propagation requirements, which matters when routing through cabinets and cable trays. At 7.84 kg per reel, it ships as a single package unit. Because it is a passive connection accessory, there are no firmware or protocol settings to configure — the cable either meets the bus impedance and shielding requirements or it does not. That makes verified condition and exact part-number match the two things worth checking before you buy.

Figure 1: Front view of the Schneider Electric TSXCANCB100 CANopen cable showing its physical design and enclosure.

Why Genuine Surplus Makes Sense for This Cable

Cable is often treated as a commodity, but on a CANopen segment the physical layer determines whether the network runs cleanly. A clone or mislabeled reel with the wrong conductor gauge or shield coverage can cause intermittent bus errors that send technicians chasing configuration faults. Autronexa sources genuine Schneider Electric surplus and refurbished cable like this one, with each reel checked against OEM datasheet markings and part-number cross-reference. For a 100 m reel, surplus stock often means you avoid the extended lead time that comes with ordering a full factory pack of 24 units. The trade-off is practical: you get a verified reel in the quantity you need, without paying for a full carton or waiting on a production schedule.

Figure 2: Technical layout and connection details for the Schneider Electric TSXCANCB100 CANopen cable.

Sourcing Checklist Before You Order

Before committing to any 100 m CANopen cable, confirm three things. First, verify the exact part number — unit is the 100 m variant, and shorter lengths in the same family will not cover a long trunk run. Second, confirm the condition grade: surplus cable that has never been installed differs from refurbished cable that has seen service, and Autronexa states the condition clearly on each reel. Third, check the environmental rating against your route — IP20 is suitable for cabinet and protected tray installation, not washdown or outdoor exposure. If your layout crosses those boundaries, plan conduit or a higher-rated cable instead. For buyers comparing against OEM list price, surplus and refurbished stock typically shortens the wait and lowers cost without compromising the physical layer. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is this a genuine Schneider Electric TSXCANCB100, or a clone?

Autronexa verifies each reel against OEM datasheet markings and part-number cross-reference. The TSXCANCB100 carries CE marking and UL recognition as stated in the source data, and we confirm these markings on the unit before shipping.

What condition will the cable arrive in?

This unit is offered as refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa for the specific condition grade on the reel currently in stock.

How fast can you ship the TSXCANCB100?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; surplus stock typically ships faster than a factory order for a full 24-unit carton.

Does the 100 m length cover a full CANopen bus segment?

The cable is rated for CANopen bus destinations at 100 m. Whether that covers your segment depends on node count, baud rate, and termination. Confirm your layout with our sourcing team before ordering.

Related & compatible parts

Schneider Electric

BMEP582040

Genuine surplus Schneider Electric BMEP582040 processor module for Modicon M580 — verified, tested, and ready to ship from…

In Stock

Schneider Electric

TSXCTY2A

Genuine surplus Schneider Electric TSXCTY2A counter module for TSX Micro PLCs — 2 channels, 40 kHz, verified condition…

In Stock

Schneider Electric

TM3DQ8T

Genuine surplus Schneider TM3DQ8T digital output module — 8 transistor channels, 0.5 A each, verified and ready to…

In Stock

Schneider Electric

140CRP93200

Genuine surplus Schneider Electric 140CRP93200 RIO head-end adaptor for Modicon Quantum — verified condition, ready to ship.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TSXCANCB100

We reply within one business day.

TSXCANCB100 Quote reply within 1 business day