Schneider Electric PLCs & Controllers

Schneider Electric TSXFPC10

Power Supply 5V DC

Manufacturer: Schneider Electric Part Number: TSXFPC10

Genuine surplus Schneider Electric TSXFPC10 FIPWAY/FIPIO interface board for TSX Micro PLCs — verified condition, ISA bus, 5V DC.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Bus Type ISA (Industry Standard Architecture)
Communication Protocols FIPWAY, FIPIO
Network Address Range 0 to 127
Station Address Range 0 to 63
I/O Address Range Configurable
Interrupt Request (IRQ) Level Configurable
DMA Channel Configurable
Power Supply 5V DC from the ISA bus
Operating Temperature 0°C to 60°C
Humidity Range 10% to 90% non-condensing

Description

When a FIPWAY or FIPIO segment drops out on a running TSX Micro PLC system, the interface board is usually the first suspect — and the hardest part to replace quickly. The Schneider Electric TSXFPC10 is the genuine ISA-bus interface board that restores that link, and sourcing a verified surplus or refurbished unit keeps the line running without waiting on OEM allocation.

What This Board Does in a TSX Micro System

The TSXFPC10 is a FIPWAY/FIPIO interface board built for the TSX Micro PLC product line. It installs in an ISA (Industry Standard Architecture) bus slot and draws its 5V DC operating power directly from that bus, so no separate supply is needed. On the network side, it handles network addresses from 0 to 127 and station addresses from 0 to 63, which covers the addressing most legacy FIPWAY and FIPIO segments actually use. The board measures 80.96 x 106.68 x 12.7 mm and weighs 0.45 kg. For maintenance engineers, the practical detail is the status LEDs for communication and power: they let you confirm at a glance whether a fault sits in the board, the cabling, or the network before you pull the card.

Figure 1: Front view of the Schneider Electric TSXFPC10 Power Supply 5V DC showing its physical design and enclosure.

Technical Specs That Matter on the Floor

Three configuration points decide whether a replacement board drops in cleanly. First, the I/O address range is configurable, so match it to the original card’s settings before installation. Second, the IRQ level is configurable, and a mismatch here is a common cause of a board that powers up but never communicates. Third, the DMA channel is configurable as well. Record all three from the failed unit before removal. The board is rated for 0°C to 60°C operating temperature and 10% to 90% non-condensing humidity, which suits typical control-cabinet conditions. It carries CE, UL, and CSA certifications. Because these settings are jumper- or switch-selectable, keep a written record of the working configuration with the panel documentation — it turns a two-hour troubleshooting session into a ten-minute swap.

Figure 2: Technical layout and connection details for the Schneider Electric TSXFPC10 Power Supply 5V DC.

Why Genuine Surplus Fits This Board

The TSX Micro line is long-established, and new-from-OEM availability for interface boards in this family is not something to count on. That is where surplus and refurbished stock earns its place: Autronexa supplies genuine parts, verified against OEM datasheet markings and part-number cross-reference, with condition stated before you commit. Each refurbished unit is tested against OEM datasheet specifications and functionally verified by our sourcing team. Compared with waiting on OEM lead time or paying full list price for old-stock new units, a verified surplus board is the practical route for a maintenance spares shelf. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric TSXFPC10, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it is listed. The board is supplied as genuine surplus or refurbished stock, not a grey-market copy.

What condition will the TSXFPC10 arrive in?

The site default condition is Refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Any surplus unit is graded and its condition stated before you commit.

How fast can you ship the TSXFPC10?

Contact Autronexa for current lead time and stock status. Surplus and refurbished units already on the shelf move faster than OEM allocation for this board family.

Does the TSXFPC10 work with FIPWAY and FIPIO networks?

Yes. The board supports both FIPWAY and FIPIO protocols, with a network address range of 0 to 127 and a station address range of 0 to 63, per the manufacturer data.

Is the TSXFPC10 still supported by Schneider Electric?

Contact Autronexa to verify OEM support status. The TSX Micro product line is long-established, so lifecycle status should be confirmed before you plan a long-term spares strategy.

Related & compatible parts

Schneider Electric

TSXDSY32T2K

Genuine surplus Schneider TSXDSY32T2K: 32 solid-state 24 V DC outputs, verified condition, faster than OEM lead time.

In Stock

Schneider Electric

172JNN21032

Genuine surplus Schneider Electric 172JNN21032 serial link adapter for Modicon Momentum — verified condition, ready to ship.

In Stock

Schneider Electric

ATV610C13N4Z

Genuine surplus Schneider ATV610C13N4Z 132 kW variable speed drive — verified condition, practical lead times, sourcing support from…

In Stock

Schneider Electric

170BNP67100

Genuine surplus Schneider Electric 170BNP67100 Modbus Plus communication module for Modicon Momentum — verified condition, sourcing support.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TSXFPC10

We reply within one business day.

TSXFPC10 Quote reply within 1 business day