Schneider Electric PLCs & Controllers

Schneider Electric TSXP47425

Series controller

Manufacturer: Schneider Electric Part Number: TSXP47425

Genuine surplus Schneider TSXP47425 Modicon controller, verified and ready to ship — 24V DC, 256 digital I/O, Modbus/Ethernet/CANopen/Profibus DP.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Rated Voltage 24V DC
Input Voltage Range 20V to 30V DC
Rated Current 1.2 A
Power Consumption 15W
Operating Temperature Range -10°C to +60°C
Storage Temperature Range -25°C to +70°C
Degree of Protection IP20
Communication Interface Modbus, Ethernet, CANopen, and Profibus DP
Memory Capacity 1MB program memory, 128KB data memory
I/O Capacity 256 digital I/O, 128 analog I/O

Description

When a Modicon-based line stops because a controller has failed, every hour of downtime adds cost. The Schneider Electric TSXP47425 is a Modicon series controller rated at 24V DC with 15W power consumption, and sourcing a genuine surplus or refurbished unit is often the fastest route back to production. Autronexa supplies verified genuine units with clear lead times.

What This Controller Solves on the Panel

The TSXP47425 addresses the common problem of fitting capable control into a standard enclosure. It runs on a 24V DC rated supply with an input voltage range of 20V to 30V DC and draws 1.2 A, so it suits panels already built around a 24V DC bus. Its IP20 degree of protection and DIN rail mounting keep installation straightforward in control cabinets. The unit measures 130 mm wide, 160 mm high and 115 mm deep and weighs 1.19 kg, which matters when you are matching an existing panel layout without redesign. An integrated, battery-backed real-time clock supports time-sensitive routines, and the operating temperature range of -10°C to +60°C covers typical plant-floor conditions.

Figure 1: Front view of the Schneider Electric TSXP47425 Series controller showing its physical design and enclosure.

Capacity and Communications Under Load

A frequent engineering pain point is running out of I/O or memory mid-project. This controller provides 256 digital I/O and 128 analog I/O points, with 1MB of program memory and 128KB of data memory. The program scan time of 1 ms per 1K of program memory keeps cycle times predictable as logic grows. Four expansion slots let you add modules as requirements expand rather than replacing the controller. For integration, the unit supports Modbus, Ethernet, CANopen and Profibus DP. Integration Note: wiring into such networks may require an external gateway or connection module — confirm required cables and gateways with your supplier.

Figure 2: Technical layout and connection details for the Schneider Electric TSXP47425 Series controller.

Why Genuine Surplus Fits This Model

OEM lead times on legacy Modicon controllers can stretch while a line sits idle. Autronexa stocks genuine surplus and refurbished automation components, and refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. That gives you a practical alternative to full OEM list price without accepting grey-market clones. Because this is a Modicon series controller with four expansion slots and broad protocol support, buyers should confirm the exact model and revision match, the condition grade (surplus versus refurbished), and accessory compatibility before ordering. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric TSXP47425, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. We supply genuine surplus and refurbished components, not grey-market copies.

What condition will the controller arrive in?

Our default condition is Refurbished: units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units may also be available — confirm the condition grade you need when you request a quote.

How fast can you ship the TSXP47425?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability, and we will confirm the shipping date before you order.

Does this controller support my existing network?

The unit lists Modbus, Ethernet, CANopen and Profibus DP interfaces. Wiring into such networks may require an external gateway or connection module — confirm required cables and gateways with your supplier before installation.

Is the TSXP47425 still supported by Schneider Electric?

Lifecycle status is not stated in our data. Please verify current lifecycle status and availability with Autronexa before ordering, and we will confirm what we can about OEM support.

Related & compatible parts

Schneider Electric

BMXDDO6402K

Genuine surplus and refurbished Schneider Electric BMXDDO6402K Modicon X80 64-channel transistor output module, verified and ready to ship.

In Stock

Schneider Electric

ATV320U15N4B

Genuine surplus ATV320U15N4B drive: 1.5 kW, 380–500 V three-phase, integrated EMC filter, verified and ready to ship.

In Stock

Schneider Electric

ATV320U22N4B

Genuine surplus Schneider ATV320U22N4B drive, 2.2 kW, 380–500 V three-phase, C2 EMC filter — verified condition and fast…

In Stock

Schneider Electric

140DDO15310C

Genuine surplus Schneider 140DDO15310C TTL output module — 32 channels, 5 V DC, verified condition and fast lead…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TSXP47425

We reply within one business day.

TSXP47425 Quote reply within 1 business day