Schneider Electric Power Supplies

Schneider Electric TSXPSY2600M

Power supply module

Manufacturer: Schneider Electric Part Number: TSXPSY2600M

Genuine surplus Schneider Electric TSXPSY2600M power supply for TSX Micro PLCs — verified condition, practical pricing, and sourcing support from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Primary Voltage 24 V DC (19.2 to 30 V)
Total Useful Secondary Power 30 W
Secondary Power 15 W at 5 V DC, 15 W at 24 V DC
Current at Secondary Voltage 3 A at 5 V DC, 0.6 A at 24 V DC (relay power supply)
Inrush Current 100 A at 24 V
Input Current ≤ 1500 mA at 24 V
Protection Type Internal fuse (3.5 A, 5 x 20 mm, time-delayed), overload, overvoltage, short-circuit protection
Operating Temperature 0 to 60 °C
IP Degree of Protection IP20

Description

The Schneider Electric TSXPSY2600M is a power supply module built for TSX Micro PLCs, supplying 5 V DC and 24 V DC rails to the rack and its I/O. Maintenance and procurement teams choose genuine surplus or refurbished units when an OEM replacement is slow or costly, because the module is verified against datasheet markings and functionally tested before dispatch.

What This Module Does in a TSX Micro Rack

The TSXPSY2600M takes a 24 V DC primary input across a 19.2 to 30 V range and converts it into the secondary rails the PLC backplane needs. It delivers 15 W at 5 V DC and 15 W at 24 V DC, for 30 W of total useful secondary power. Secondary current is 3 A at 5 V DC and 0.6 A at 24 V DC for relay power. The module tolerates an inrush current of 100 A at 24 V and draws no more than 1500 mA at 24 V. A green LED confirms voltage presence; a red LED flags a battery fault. Protection includes an internal 3.5 A time-delayed fuse, plus overload, overvoltage and short-circuit protection. The IP20 rating suits cabinet interiors, and the TC protective treatment helps in ordinary industrial atmospheres.

Figure 1: Front view of the Schneider Electric TSXPSY2600M Power supply module showing its physical design and enclosure.

Why Surplus and Refurbished Makes Sense Here

TSX Micro installations are mature, and a failed power supply can stall a line while a new-build order works through its queue. Autronexa stocks genuine surplus and refurbished units of this module as a practical alternative. Each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships. That means the 30 W secondary budget, the 100 A inrush tolerance and the internal fuse arrangement are checked, not assumed. Because we hold stock rather than order on demand, lead times are typically shorter than an OEM factory lead time, and the price reflects the surplus market rather than a full list price. For a platform that is no longer in active production, this is often the only realistic route to a verified spare.

Figure 2: Technical layout and connection details for the Schneider Electric TSXPSY2600M Power supply module.

Buyer’s Checklist Before You Order

Confirm the exact part number on your existing module and on the rack label; TSX Micro racks accept specific supply variants, so a near-match is not a safe substitute. Check that your load fits within 30 W total and that the 5 V DC and 24 V DC current draw stays inside 3 A and 0.6 A respectively. Decide whether you need a surplus unit or a refurbished one, and ask for the condition grade in writing. Verify the input voltage at your panel sits inside 19.2 to 30 V DC. If you are replacing a module that has been in service for years, inspect the fuse holder and terminal blocks for heat damage before fitting the replacement. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: TSXPSY2600M-datasheet.pdf

Frequently asked questions

Is this a genuine Schneider Electric TSXPSY2600M, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. We do not sell copies or unmarked substitutes.

What condition will the TSXPSY2600M arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available; ask for the condition grade in writing when you request a quote.

How fast can you ship this power supply module?

Lead time depends on current stock. Contact Autronexa for the present lead time on this part number; held stock usually ships faster than an OEM factory order.

Does the TSXPSY2600M fit any TSX Micro rack?

It is built for TSX Micro PLCs, but rack variants differ. Match the part number on your existing module and rack label, and confirm your load stays within the 30 W total secondary power before ordering.

Is the TSXPSY2600M still supported by Schneider Electric?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before you commit to a replacement plan.

Related & compatible parts

Schneider Electric · Advantys STB

STBDDO3200

Genuine surplus Schneider STBDDO3200 2-channel digital output module — discontinued Advantys STB part, verified and ready to ship.

In Stock

Schneider Electric

140CPU43412U

Genuine surplus Schneider 140CPU43412U Unity processor — verified, tested, and ready to ship for Modicon Quantum systems.

In Stock

Schneider Electric

TM5NS31

Genuine surplus Schneider Electric TM5NS31 Sercos III module — verified, tested, and ready to ship for Modicon LMC078…

In Stock

Schneider Electric

140ACI05100SC

Genuine surplus Schneider Electric 140ACI05100SC input module — 32-point, 12/16-bit resolution, verified condition and ready to ship.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TSXPSY2600M

We reply within one business day.

TSXPSY2600M Quote reply within 1 business day