Schneider Electric I/O & Function Modules
Schneider Electric OTB1CODM9LP
I/O Module
Genuine surplus Schneider OTB1CODM9LP CANopen I/O module — 20 I/O, verified condition, faster than OEM lead time.
- 12 Month
- Refurbished
- In Stock
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
5-15 days
Technical specifications
| Device classification | Bus coupler / distributed I/O slave |
|---|---|
| Digital inputs | 12 (24 Vdc, sink/source, Type 1 per IEC 61131-2) |
| Digital outputs | 8 (2 solid-state PNP 0.3 A + 6 relay 2 A) |
| Built-in ports | 1× CANopen (SUB-D9) |
| High-speed counters | 2 × 20 kHz |
| Pulse outputs | 2 × 7 kHz pulse generator |
| Expansion modules (max) | Up to 7 TM2 expansion modules |
| Supply voltage | 24 V DC (20.4...26.4 V) |
| Power consumption | 19 W |
| Protection rating | IP20 |
Description
When a CANopen drop fails on a running line, every hour of downtime adds cost. The Schneider Electric OTB1CODM9LP is a discontinued Advantys OTB distributed I/O module with 12 digital inputs and 8 digital outputs, and a verified surplus unit keeps that network segment running without an OEM lead-time wait.
What This Advantys OTB Module Does
The unit is a bus coupler and distributed I/O slave, not a programmable controller. Its CANopen slave port is a single SUB-D9 connector, so it drops onto an existing CANopen segment as a slave node. The input side carries 12 digital channels at 24 Vdc, sink/source, Type 1 per IEC 61131-2. The output side splits into 2 solid-state PNP channels at 0.3 A and 6 relay channels at 2 A — a mix that suits panels where a few fast outputs sit beside contactor-level switching. Two high-speed counters at 20 kHz and two 7 kHz pulse generators are built in, which covers counting and simple positioning tasks without extra hardware. Up to 7 TM2 expansion modules can be added, so channel count grows with the machine.

Technical Specs in Practice
At 19 W power consumption and 700 mA bus current at 26.2 V, the module draws modest current from the 24 V DC supply, which accepts 20.4 to 26.4 V. The IP20 rating and 0 to +55 °C operating range place it inside a cabinet, not on the machine frame. At 90 × 55 × 70 mm and 0.195 kg, it fits a standard DIN rail footprint in the OTB family. Storage tolerance runs from -25 to +70 °C, and humidity must stay between 10 and 95%, non-condensing. Compare it with a typical analog-capable distributed I/O block: this module has no analog inputs or outputs, so specify it only where digital I/O and counting are the requirement. Against a larger fieldbus block, its 20 I/O and 7-module expansion ceiling define the limit.

Surplus Advantage and Sourcing Notes
Schneider lists this module as discontinued, with the TM3BCEIP plus TM3 distributed I/O named as the replacement path. That status is exactly where genuine surplus stock earns its place: a verified refurbished unit keeps an existing Advantys OTB segment on its original CANopen architecture instead of forcing a migration. Each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships. Before ordering, confirm the exact model and revision, whether you need surplus or refurbished condition, and that your TM2 expansion modules match the 7-module limit. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.
Frequently asked questions
Is this a genuine Schneider Electric OTB1CODM9LP, or a clone?
Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. We supply genuine surplus and refurbished components, not grey-market copies.
What condition will the module arrive in?
The site default condition is Refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Confirm the exact condition grade you need when you request a quote.
How fast can you ship this CANopen I/O module?
Lead time depends on current stock. Contact Autronexa for the current lead time and availability on this part number before placing an order.
Does it work with my existing CANopen network?
The module provides one CANopen slave port on a SUB-D9 connector. Confirm segment addressing and cabling with your network documentation, since no further communication expansion is available on this NIM variant.
Is the OTB1CODM9LP still supported by Schneider Electric?
Schneider lists it as discontinued, with the TM3BCEIP plus TM3 distributed I/O as the replacement. Contact Autronexa to verify OEM support status and availability of genuine surplus stock.
Related & compatible parts
Schneider Electric
iC60N 4P C32
Genuine surplus Schneider iC60N 4P C32 miniature circuit breaker — verified 32 A, C-curve, 6 kA, ready to…
Schneider Electric
ATV610U07N4Z
Genuine surplus Schneider ATV610U07N4Z Easy Altivar 610 drive — 0.75 kW, 380...460 V three-phase, C3 EMC filter, no…
Schneider Electric
iC60N 2P C40
Genuine surplus Schneider iC60N 2P C40 circuit breaker — 40A C-curve, 6 kA, DIN rail. Verified condition and…
Schneider Electric
BMXSDI3202
Genuine surplus Schneider Electric BMXSDI3202 Modicon X80 32-channel safety discrete input module, SIL3/PLe rated, verified and ready to…
News & guides for Schneider Electric
Schneider Electric Product Carbon Footprint Data: What Engineers Can Look Up
TL;DR: Schneider Electric publishes product-level carbon data, but not through a single system. Product pages carry a “total life cycle…
Schneider Electric at Datacenter Korea 2026 and Tech Show Madrid: The Integrated AI Data Center Stack
Schneider Electric is pitching an integrated AI data center stack — power, cooling, and software as one system — at…
Schneider Electric spare parts: buying guide, series overview and how to order
Schneider Electric spare parts buying guide: 8 parts online, popular series, condition options and how our RFQ process works.
Murata’s SWL RF Test Connector: What the 40% Claim Actually Covers
Murata Manufacturing announced on 29 October 2026 that its SWL series of RF and microwave coaxial connectors with a built-in…
Nexans 700 VDC Microgrid: What Changes for Factories and Spares
Nexans has switched part of its own AmpaCity global innovation hub in Lyon, France, onto a 700 V direct-current main distribution…
EPC’s New 100 V GaN Inverter Boards: 35 ARMS, 100 kHz, 80 V Bus
In short: On 27 October 2026 EPC announced the EPC91124 and EPC91125, two 100 V three-phase BLDC inverter evaluation boards…
Omron C6 Servo Launches in Europe: What Changes for 1S and Spares
Omron's C6 servo launched in Europe on 7 October 2026 with a 26-bit encoder, 3.5 kHz response and STO. What…
Intel Offers Korean AI Chip Firms Custom Design, Packaging and Foundry Routes
Intel used its own Seoul summit to offer Korean AI chip companies custom silicon, advanced packaging and foundry routes. No…
