Schneider Electric Communication Modules

Schneider Electric TCSESM083F2CS0

Ethernet TCP/IP managed switch

Manufacturer: Schneider Electric Part Number: TCSESM083F2CS0

Genuine surplus Schneider Electric TCSESM083F2CS0 managed switch — 6 copper + 2 single-mode fiber ports, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Ports 6 x RJ45 10/100BASE-TX copper + 2 x 100BASE-FX single-mode fiber (SC)
Protocol support Ethernet TCP/IP, SSH, HTTP, HTTPS, SNMP, RS232, LLDP, Telnet, SNTP, MRP
Redundancy HiPER ring, RSTP
Max ring nodes 50
Switching capacity 5.6 Gbps
MAC table size 8K entries
Supply voltage 24V DC
Protection rating IP20
Mounting 35 mm symmetrical DIN rail

Description

How do you add managed Ethernet switching to a control network when the OEM lead time stretches weeks and the line can’t wait? The TCSESM083F2CS0 from Schneider Electric answers that question: a ConneXium managed switch with six copper and two single-mode fiber ports, available as genuine surplus and refurbished stock verified by Autronexa.

What This ConneXium Switch Does on the Network

The TCSESM083F2CS0 is a managed Ethernet TCP/IP switch built for industrial control networks. It combines 6 x RJ45 10/100BASE-TX copper ports with 2 x 100BASE-FX single-mode fiber (SC) ports, so you can connect local devices over copper and extend the backbone over long distances using fiber. The switch supports a broad protocol set including Ethernet TCP/IP, SSH, HTTP, HTTPS, SNMP, RS232, LLDP, Telnet, SNTP, and MRP. Redundancy is handled through HiPER ring and RSTP, with support for up to 50 ring nodes. A switching capacity of 5.6 Gbps and an 8K-entry MAC table keep traffic moving across the ring. The unit mounts on a 35 mm symmetrical DIN rail and operates on 24V DC supply. Its IP20 protection rating suits installation inside a control cabinet. The ConneXium series is part of Schneider Electric’s Transparent Ready concept, and port hardening adds a layer of cybersecurity configuration to the switch.

Figure 1: Front view of the Schneider Electric TCSESM083F2CS0 Ethernet TCP/IP managed switch showing its physical design and enclosure.

Surplus Advantage: Why Refurbished Makes Sense Here

Because the ConneXium range is listed as active in production, you might assume a new unit is the only path. But OEM lead times can still stretch when a specific fiber configuration is in demand. Autronexa stocks genuine surplus and refurbished units of this switch, each tested against OEM datasheet specifications and functionally verified by our sourcing team. That means you get a verified part with a clear lead time, often at a lower cost than OEM list price. For maintenance teams managing a ring of up to 50 nodes, having a spare switch on the shelf is practical insurance. The 24V DC supply and DIN-rail mounting make swap-out straightforward, and the fiber ports let you restore backbone connectivity without re-cabling the whole segment. If you are comparing surplus against new, the key is condition transparency — and that is what we provide.

Figure 2: Technical layout and connection details for the Schneider Electric TCSESM083F2CS0 Ethernet TCP/IP managed switch.

Selection and Sourcing Guide

When specifying this switch, confirm the exact model and port configuration match your network design. This unit uses single-mode fiber SC connectors, so verify your existing fiber patch leads are compatible. Check that your cabinet provides 24V DC power and a 35 mm DIN rail. If you are replacing a failed unit, note any revision markings on the existing switch and share them with our team so we can cross-reference. Autronexa can help you verify condition — surplus versus refurbished — and confirm current availability. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: TCSESM083F2CS0-datasheet.pdf

Frequently asked questions

Is this TCSESM083F2CS0 a genuine Schneider Electric switch, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. We source genuine surplus and refurbished Schneider Electric components, not grey-market copies.

What condition will the TCSESM083F2CS0 arrive in?

Our default condition is refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact us for the specific condition of current stock.

How fast can you ship the TCSESM083F2CS0?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability.

Does this switch support ring redundancy?

Yes, the TCSESM083F2CS0 supports HiPER ring and RSTP redundancy, with a maximum of 50 ring nodes, as listed in the datasheet.

Related & compatible parts

Schneider Electric

TSXCPP110C

Genuine surplus TSXCPP110C Modicon processor module, 24V DC, Modbus/Profibus, rail-mounted — verified condition and clear lead times from…

In Stock

Schneider Electric · Advantys STB

STBDDO3200

Genuine surplus Schneider STBDDO3200 2-channel digital output module — discontinued Advantys STB part, verified and ready to ship.

In Stock

Schneider Electric

ATV71HC25N4

Genuine surplus Schneider ATV71HC25N4 Altivar 71 drive, 220 kW, 380–480 VAC, verified condition and ready to ship.

In Stock

Schneider Electric

ABE7H16R11

Genuine surplus Schneider Electric ABE7H16R11 16-channel sub-base — verified condition, practical lead times, sourcing help from Autronexa.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TCSESM083F2CS0

We reply within one business day.

TCSESM083F2CS0 Quote reply within 1 business day