Schneider Electric Cables & Connectors
Schneider Electric ABE7H16R11
Sub-base
Genuine surplus Schneider Electric ABE7H16R11 16-channel sub-base — verified condition, practical lead times, sourcing help from Autronexa.
- 12 Month
- Refurbished
- In Stock
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
5-15 days
Technical specifications
| Number of channels | 16 |
|---|---|
| Terminals per channel | 1 |
| Signal type | Discrete input/output, no polarity distribution |
| Rated supply voltage | 19-30V DC (IEC 61131-2) |
| Maximum supply current | 1.8 A |
| Current per channel | 0.5 A |
| Connector | HE-10 20-pin |
| Protection | 2 A internal fuse, LED per channel |
| Operating temperature | -5 to 60 °C |
| Protection rating | IP2X |
| Mounting | 35 mm DIN rail clips / screw |
| Dimensions (H×W×D) | 77 × 206 × 58 mm |
| Weight | 0.64 kg |
| Wire cross-section | 0.14-2.5 mm² solid, 0.09-1.5 mm² flexible |
Description
When a Telefast ABE7 wiring interface needs replacing on a running control cabinet, every hour of downtime adds cost. The Schneider Electric ABE7H16R11 is a 16-channel passive discrete I/O connection sub-base, and Autronexa supplies it as a genuine surplus or refurbished unit with verified condition and practical lead times.
What This Sub-base Does in a Control Cabinet
The ABE7H16R11 sits between field wiring and the I/O cards of a PLC, carrying discrete input and output signals with no polarity distribution. Each of the 16 channels has one terminal, and the unit connects to the controller side through an HE-10 20-pin connector. A 2 A internal fuse protects the assembly, and an LED per channel gives technicians a quick visual check during commissioning and fault finding. Because the part is passive, it adds no signal processing of its own — it is a wiring and termination layer, which is why exact channel count and connector type matter more than any firmware or protocol question. The module mounts on 35 mm DIN rail clips or by screw, and its 77 × 206 × 58 mm footprint and 0.64 kg weight suit standard cabinet layouts.

Technical Specs That Drive the Buying Decision
Three values decide whether this variant fits an existing installation. First, the 19–30V DC rated supply voltage under IEC 61131-2 sets the control-side supply window; confirm your cabinet supply falls inside it before ordering. Second, current limits are split between 1.8 A maximum supply current and 0.5 A per channel, so total load planning should respect both figures. Third, wire cross-section acceptance of 0.14–2.5 mm² solid and 0.09–1.5 mm² flexible covers most panel wiring, but check your field conductors against those ranges. The operating temperature range of -5 to 60 °C and IP2X protection rating describe where the unit can live; IP2X means finger-safe protection rather than washdown sealing, so plan enclosure placement accordingly.

Why Genuine Surplus Fits This Part
Schneider Electric lists the Telefast ABE7 range as active, so this is not an obsolete item — but that does not mean every buyer wants to wait on a factory order. Surplus and refurbished stock gives maintenance teams a practical alternative when a cabinet is down or a spares shelf needs replenishing. Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, and refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. For a passive sub-base, that verification centres on channel continuity, fuse integrity, connector condition and LED function — the points that actually fail in service. Buyers comparing against a brand-new distributor should confirm the exact variant, since ABE7 sub-bases differ in channel count and connector style, and a near-match will not drop into an existing harness.
Sourcing Checklist Before You Order
Work through four checks. Confirm the model string matches unit exactly, including any suffix on your existing unit. Verify the HE-10 20-pin connector on your cable assembly is the mating type. Confirm your supply voltage and per-channel loads sit within the 19–30V DC and 0.5 A limits. Finally, decide whether you need surplus or refurbished condition and state it on your request so the sourcing team can match stock. Please verify current lifecycle status and availability with Autronexa before ordering, and include your part number so we can confirm condition and lead time.
Frequently asked questions
Is this a genuine Schneider Electric ABE7H16R11, or a clone?
Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it is listed. We supply genuine surplus and refurbished components, not grey-market copies.
What condition will the sub-base arrive in?
The site default condition is Refurbished. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available — state your preference when you request a quote.
How fast can Autronexa ship the ABE7H16R11?
Lead time depends on current stock at the time of your request. Contact Autronexa with your part number for verified condition and current availability.
Does this sub-base work with my existing HE-10 cable?
The unit uses an HE-10 20-pin connector. Confirm your cable assembly is the mating HE-10 type before ordering, since other ABE7 variants use different connector styles.
Is the ABE7H16R11 still in production?
Schneider Electric lists the Telefast ABE7 range as active, last verified in 2026-09. Contact Autronexa to confirm current OEM support status and availability.
Related & compatible parts
Schneider Electric
ATV610C31N4
Genuine surplus Schneider ATV610C31N4 drive, 315 kW normal duty, 380–460 V, C3 EMC filter. Verified condition and sourcing…
Schneider Electric
171CBU78090
Genuine surplus Schneider Electric 171CBU78090 processor for Modicon Momentum — verified condition, practical lead times, and sourcing support…
Schneider Electric
ATV610C16N4
Genuine surplus Schneider ATV610C16N4 drive — 160 kW, 380...460 V, C3 EMC filter, Modbus. Verified condition and clear…
Schneider Electric
AS-B872-002
Genuine surplus Schneider AS-B872-002 analog output module for Modicon 984 — 4-channel 4–20 mA, verified and ready to…
News & guides for Schneider Electric
Schneider Electric Product Carbon Footprint Data: What Engineers Can Look Up
TL;DR: Schneider Electric publishes product-level carbon data, but not through a single system. Product pages carry a “total life cycle…
Schneider Electric at Datacenter Korea 2026 and Tech Show Madrid: The Integrated AI Data Center Stack
Schneider Electric is pitching an integrated AI data center stack — power, cooling, and software as one system — at…
Schneider Electric spare parts: buying guide, series overview and how to order
Schneider Electric spare parts buying guide: 8 parts online, popular series, condition options and how our RFQ process works.
Murata’s SWL RF Test Connector: What the 40% Claim Actually Covers
Murata Manufacturing announced on 29 October 2026 that its SWL series of RF and microwave coaxial connectors with a built-in…
Nexans 700 VDC Microgrid: What Changes for Factories and Spares
Nexans has switched part of its own AmpaCity global innovation hub in Lyon, France, onto a 700 V direct-current main distribution…
EPC’s New 100 V GaN Inverter Boards: 35 ARMS, 100 kHz, 80 V Bus
In short: On 27 October 2026 EPC announced the EPC91124 and EPC91125, two 100 V three-phase BLDC inverter evaluation boards…
Omron C6 Servo Launches in Europe: What Changes for 1S and Spares
Omron's C6 servo launched in Europe on 7 October 2026 with a 26-bit encoder, 3.5 kHz response and STO. What…
Intel Offers Korean AI Chip Firms Custom Design, Packaging and Foundry Routes
Intel used its own Seoul summit to offer Korean AI chip companies custom silicon, advanced packaging and foundry routes. No…
