Schneider Electric I/O & Function Modules
Schneider Electric 170ADO53050
Discrete output module
Genuine surplus Schneider 170ADO53050 discrete output module — 8 Triac outputs at 120 V AC, verified condition and fast sourcing from Autronexa.
- 12 Month
- Refurbished
- In Stock
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
5-15 days
Technical specifications
| Number of Outputs | 8 |
|---|---|
| Voltage Rating | 120 V AC |
| Output Type | Triac |
| Current per Channel | 2 A |
| Total Current Rating | 16 A |
| Short-Circuit Protection | Internal fuse, 5 A slow-blow per group |
| Minimum Output Current | 5 mA |
| Maximum Leakage Current | 1.9 mA |
| Response Time | 0.5 line cycle |
| Power Dissipation | 6 W typical, 7.5 W maximum |
Description
The Schneider Electric 170ADO53050 is an 8-channel discrete output module for Modicon Momentum systems, rated 120 V AC with Triac outputs at 2 A per channel. For maintenance and procurement teams, a verified surplus or refurbished unit keeps legacy Momentum I/O running without OEM lead-time exposure. Autronexa supplies genuine parts, verified before dispatch.
What This Momentum Output Module Does in Your Panel
The 170ADO53050 sits in the Modicon Momentum I/O family and switches eight independent AC loads. Each Triac output handles 2 A, with a 16 A total module rating, so the module suits grouped solenoids, contactor coils, and indicator banks on a 120 V AC control bus. Response time is 0.5 line cycle in either state transition, which keeps sequencing tight for interlocking and pilot-device circuits. Minimum output current is 5 mA and maximum leakage is 1.9 mA, so low-draw loads still switch cleanly without ghost activation. Channel isolation is rated 1780 V AC for one minute, separating field wiring from the backplane side. Internal fusing is 5 A slow-blow per group, with overload protection built in. Typical dissipation is 6 W, peaking at 7.5 W, which matters when you calculate enclosure thermal load on a dense Momentum rack.

Why Genuine Surplus Fits This Module
Momentum installations are long-lived, and the I/O modules around them are often the first spares to run short. A refurbished unit is tested against OEM datasheet specifications and functionally verified by our sourcing team, so you get a known-condition unit rather than an untested pull. Surplus and refurbished stock is ready to ship, which shortens the gap between a failed output group and a restored line. Compared with OEM list pricing on remaining new stock, the surplus route typically reduces cost while keeping the part number and form factor identical to what is already in the panel. If your site runs several Momentum racks, holding one verified spare of this output module is practical insurance against a single blown group taking down a machine section.

Sourcing Checklist Before You Order
Confirm the exact part number on the module label matches unit, and check whether your rack uses the same voltage configuration — this unit is 120 V AC, not a DC variant. Ask for the condition grade: surplus, refurbished, or new surplus, and request test documentation for the output channels and internal fuses. Verify the EAN 3595861147553 if your procurement system tracks it. Because the module weighs 1.00 lbs (0.45 kg), shipping is straightforward, but packaging and ESD handling still matter. Please verify current lifecycle status and availability with Autronexa before ordering, since Schneider’s Momentum support position can change. Contact Autronexa with your part number for verified condition and current availability.
Frequently asked questions
Is this a genuine Schneider Electric 170ADO53050, or a clone?
Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. The module you receive carries the Schneider Electric identification and the 170ADO53050 part number, with the EAN 3595861147553 where the label is present.
What condition will the module arrive in?
The site default condition is Refurbished. Units are tested against OEM datasheet specifications and functionally verified by our sourcing team, including output channel checks and internal fuse inspection. Ask for the specific condition grade on the unit reserved for your order.
How fast can Autronexa ship the 170ADO53050?
Lead time depends on current stock at the time of your request. Contact Autronexa with the part number for verified condition and current availability; surplus and refurbished stock is ready to ship once confirmed.
Does this module work with my existing Modicon Momentum rack?
The 170ADO53050 is a Modicon Momentum discrete output module with 8 Triac outputs at 120 V AC. Confirm your rack's voltage configuration and slot assignment against your Momentum documentation before ordering, since DC variants exist in the same family.
Is the 170ADO53050 still supported by Schneider Electric?
Lifecycle status is not stated in our source data. Please verify current lifecycle status and availability with Autronexa before ordering, and we will confirm what we can about OEM support at the time of your request.
Related & compatible parts
Schneider Electric · Advantys STB
STBART0200
Genuine surplus Schneider Electric STBART0200 Advantys STB 2-channel RTD/TC/mV analog input module — verified condition, sourcing help included.
Schneider Electric
TM5SDI4D
Genuine surplus Schneider Electric TM5SDI4D digital input module, verified and refurbished, with fast lead times and sourcing support.
Schneider Electric
ATV930D37N4Z
Genuine surplus Schneider ATV930D37N4Z drive — dual-rated 37 kW ND / 30 kW HD, verified condition, ready to…
Schneider Electric
140ERT85410
Genuine surplus Schneider 140ERT85410 multifunction input module — 32 discrete inputs, 2 isolated groups, verified and ready to…
News & guides for Schneider Electric
Schneider Electric Product Carbon Footprint Data: What Engineers Can Look Up
TL;DR: Schneider Electric publishes product-level carbon data, but not through a single system. Product pages carry a “total life cycle…
Schneider Electric at Datacenter Korea 2026 and Tech Show Madrid: The Integrated AI Data Center Stack
Schneider Electric is pitching an integrated AI data center stack — power, cooling, and software as one system — at…
Schneider Electric spare parts: buying guide, series overview and how to order
Schneider Electric spare parts buying guide: 8 parts online, popular series, condition options and how our RFQ process works.
Murata’s SWL RF Test Connector: What the 40% Claim Actually Covers
Murata Manufacturing announced on 29 October 2026 that its SWL series of RF and microwave coaxial connectors with a built-in…
Nexans 700 VDC Microgrid: What Changes for Factories and Spares
Nexans has switched part of its own AmpaCity global innovation hub in Lyon, France, onto a 700 V direct-current main distribution…
EPC’s New 100 V GaN Inverter Boards: 35 ARMS, 100 kHz, 80 V Bus
In short: On 27 October 2026 EPC announced the EPC91124 and EPC91125, two 100 V three-phase BLDC inverter evaluation boards…
Omron C6 Servo Launches in Europe: What Changes for 1S and Spares
Omron's C6 servo launched in Europe on 7 October 2026 with a 26-bit encoder, 3.5 kHz response and STO. What…
Intel Offers Korean AI Chip Firms Custom Design, Packaging and Foundry Routes
Intel used its own Seoul summit to offer Korean AI chip companies custom silicon, advanced packaging and foundry routes. No…
