Schneider Electric Communication Modules
Schneider Electric TCSESU053FN0
Ethernet TCP/IP unmanaged switch
Genuine surplus Schneider Electric TCSESU053FN0 ConneXium 5-port unmanaged Ethernet switch — verified condition, ready to ship.
- 12 Month
- Refurbished
- In Stock
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
5-15 days
Technical specifications
| Ports | 5 x shielded RJ45 10/100BASE-TX copper |
|---|---|
| Managed/Unmanaged | Unmanaged |
| Protocol support | Ethernet TCP/IP |
| Switching capacity | 1.6 Gbps |
| MAC table size | 8K entries |
| Jumbo frame | 9216 bytes |
| Supply voltage | 9.6-32V DC (SELV), 24V DC nominal |
| Power consumption | 2.2 W |
| Protection rating | IP20 |
| Mounting | 35 mm symmetrical DIN rail |
Description
When a control cabinet loses its copper Ethernet backbone, every device downstream goes silent — and the fix usually needs a switch that mounts today, not a six-week OEM wait. The Schneider Electric TCSESU053FN0 is a ConneXium unmanaged Ethernet TCP/IP switch with five shielded RJ45 10/100BASE-TX copper ports, and Autronexa supplies it as genuine surplus and refurbished stock so you can restore the segment quickly.
What This ConneXium Switch Does in a Cabinet
The unit is an unmanaged switch, so it forwards traffic without configuration, VLANs, or an IP address of its own. That makes it a practical drop-in for panel builders and maintenance teams who need to fan out one uplink to several Ethernet TCP/IP devices. Five shielded RJ45 ports accept standard 10/100BASE-TX copper cabling. The Transparent Ready concept places it in Schneider Electric’s range of infrastructure components built to sit alongside automation equipment rather than inside a managed network core. A 35 mm symmetrical DIN rail clip handles mounting, and the IP20 protection rating suits installation inside an enclosure. Because the switch is unmanaged, there is no firmware to commission and no addressing to plan — power it, cable it, and the segment is live.

Technical Specs That Matter on the Plant Floor
Three figures drive most selection decisions here. First, switching capacity of 1.6 Gbps gives the five ports headroom for full-duplex traffic across the segment. Second, an 8K-entry MAC table lets the switch learn a large population of device addresses, which matters when several controllers and I/O nodes share one segment. Third, a jumbo frame size of 9216 bytes supports larger payloads where the connected devices use them. Power comes from a 9.6-32V DC (SELV) supply with 24V DC nominal, and consumption is 2.2 W, so a small panel supply can carry it. Cascade depth is unlimited, which means you can chain switches without a stated hop limit in the datasheet. Operating temperature is not published for this configuration — confirm the ambient range with Autronexa if your enclosure runs warm.

Why Genuine Surplus Fits This Switch
The ConneXium range is listed as active, in production, last verified 2026-09, so this is not an obsolete-part rescue. The surplus case is different: unmanaged switches are commodity infrastructure, and buyers often need one or two units to complete a panel rather than a full OEM carton. Autronexa stocks genuine surplus and refurbished units, each tested against OEM datasheet specifications and functionally verified by our sourcing team. You get the exact model rather than a lookalike, with a shorter path to delivery than a factory order. Contact Autronexa with your part number for verified condition and current availability.
Sourcing Checklist Before You Order
Confirm the five-port copper configuration matches your segment; this is the 10/100BASE-TX variant, not a fibre model. Check that your enclosure supply delivers 24V DC nominal within the 9.6-32V DC SELV window. Verify the DIN rail is 35 mm symmetrical. Decide whether you need surplus or refurbished condition and state it on the request. Please verify current lifecycle status and availability with Autronexa before ordering.
Frequently asked questions
Is this TCSESU053FN0 a genuine Schneider Electric switch or a clone?
Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. The switch you receive is a genuine Schneider Electric ConneXium unit, not a copy.
What condition will the switch arrive in?
Our site default is refurbished: units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus condition may also be available — state your preference when you request a quote.
How fast can Autronexa ship the TCSESU053FN0?
Lead time depends on current stock at the time of your request. Contact Autronexa with the part number for verified condition and current availability; in-stock surplus and refurbished units are ready to ship.
Does this switch need any configuration before use?
No. It is an unmanaged switch with five shielded RJ45 10/100BASE-TX copper ports and Ethernet TCP/IP protocol support, so it forwards traffic without addressing or commissioning.
Is the ConneXium range still in production?
The datasheet lists the range as active, in production, last verified 2026-09. Contact Autronexa to confirm OEM support status for your specific unit.
Related & compatible parts
Schneider Electric
BMEH582040C
Genuine surplus BMEH582040C redundant processor module for Modicon M580 — verified condition, tested, and ready to ship.
Schneider Electric
140CPU21304C
Genuine surplus Schneider 140CPU21304C Modicon Quantum CPU — conformal coated, 768 KB RAM, verified and ready to ship.
Schneider Electric
BMXP342000
Genuine surplus Schneider Electric BMXP342000 processor module for Modicon M340 — verified condition, practical pricing, and faster sourcing…
Schneider Electric
ABE7CPA21
The Schneider Electric ABE7CPA21 is a connection sub-base designed for use with counter and analog channels. Rated for…
News & guides for Schneider Electric
Schneider Electric Product Carbon Footprint Data: What Engineers Can Look Up
TL;DR: Schneider Electric publishes product-level carbon data, but not through a single system. Product pages carry a “total life cycle…
Schneider Electric at Datacenter Korea 2026 and Tech Show Madrid: The Integrated AI Data Center Stack
Schneider Electric is pitching an integrated AI data center stack — power, cooling, and software as one system — at…
Schneider Electric spare parts: buying guide, series overview and how to order
Schneider Electric spare parts buying guide: 8 parts online, popular series, condition options and how our RFQ process works.
Murata’s SWL RF Test Connector: What the 40% Claim Actually Covers
Murata Manufacturing announced on 29 October 2026 that its SWL series of RF and microwave coaxial connectors with a built-in…
Nexans 700 VDC Microgrid: What Changes for Factories and Spares
Nexans has switched part of its own AmpaCity global innovation hub in Lyon, France, onto a 700 V direct-current main distribution…
EPC’s New 100 V GaN Inverter Boards: 35 ARMS, 100 kHz, 80 V Bus
In short: On 27 October 2026 EPC announced the EPC91124 and EPC91125, two 100 V three-phase BLDC inverter evaluation boards…
Omron C6 Servo Launches in Europe: What Changes for 1S and Spares
Omron's C6 servo launched in Europe on 7 October 2026 with a 26-bit encoder, 3.5 kHz response and STO. What…
Intel Offers Korean AI Chip Firms Custom Design, Packaging and Foundry Routes
Intel used its own Seoul summit to offer Korean AI chip companies custom silicon, advanced packaging and foundry routes. No…
