Schneider Electric I/O & Function Modules

Schneider Electric TM5SAO4L

Analog Output Module

Manufacturer: Schneider Electric Part Number: TM5SAO4L

Genuine surplus Schneider Electric TM5SAO4L analog output module — 4 channels, 12-bit, verified condition and practical lead times from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Module type Analog output (voltage/current configurable per channel)
Channels 4
Signal type ±10 Vdc, 0-20 mA (software configurable per channel)
Resolution 12 bits
Accuracy ±0.3% of full scale at 25 °C (±0.5% FS over temperature)
Isolation No isolation between channels; 500 Vrms AC between channels and bus
Response time 1 ms max. for output change; sampling 200 µs
Power consumption 1.8 W
Operating temperature 0...+55 °C
Protection rating IP20

Description

When a Modicon TM5 rack needs an analog output module and the OEM lead time stretches past your maintenance window, what is the practical route? A verified surplus or refurbished Schneider Electric TM5SAO4L analog output module gives you four configurable channels at 12-bit resolution without waiting on a factory backorder. This is a genuine Modicon TM5 unit for engineers maintaining M241, M251, M258 and LMC058 platforms.

What This Module Does in a TM5 Rack

This analog output module carries four channels, each software-configurable for ±10 Vdc or 0-20 mA, so a single card can drive both voltage-input drives and current-loop devices in the same panel. Resolution is 12 bits, and accuracy is ±0.3% of full scale at 25 °C, widening to ±0.5% FS over the operating temperature range. Response time is 1 ms maximum for an output change, with 200 µs sampling. The module reports ModuleOK, DcOk and NetworkOk diagnostics, which helps you separate a channel fault from a bus or supply problem during commissioning. Isolation is 500 Vrms AC between channels and the bus, with no isolation between channels themselves — plan wiring accordingly.

Figure 1: Front view of the Schneider Electric TM5SAO4L Analog Output Module showing its physical design and enclosure.

Technical Specifications That Matter on the Floor

The module draws 1.8 W and takes 3 mA at 5 V DC from the TM5 bus plus 90 mA at 24 V DC. It measures 99 × 12.5 × 75 mm and weighs 0.025 kg, so it fits the standard TM5 slice footprint. Operating temperature is 0…+55 °C, storage -25…+70 °C, and the protection rating is IP20 — cabinet-mounted only. Because the unit is software-configurable per channel, you can match an existing machine’s signal plan without swapping hardware, provided you confirm the platform and channel assignment before ordering.

Why Genuine Surplus Fits This Module

The TM5SAO4L is listed as Active, last verified 2026-09, so it is not an obsolete part — but that does not guarantee short OEM lead times when a line is down. Autronexa stocks genuine surplus and refurbished units tested against OEM datasheet specifications and functionally verified by our sourcing team. For a module with this channel density, that means you can replace a failed slice without re-engineering the rack or waiting on a distributor allocation. Refurbished units arrive functionally verified, and surplus units retain original markings for cross-reference. Contact Autronexa with your part number for verified condition and current availability.

Sourcing Checks Before You Order

Confirm the platform in your rack — M241, M251, M258 or LMC058 — and verify the channel count and signal type your application expects. Check whether you need voltage or current configuration per channel, since this module supports both in software. Ask for the condition grade (surplus or refurbished) and the current lead time. Please verify current lifecycle status and availability with Autronexa before ordering.

📄 Download Datasheet: TM5SAO4L-datasheet.pdf

Frequently asked questions

Is this a genuine Schneider Electric TM5SAO4L, or a clone?

Autronexa verifies units against OEM datasheet markings and part-number cross-reference. Every module is checked as genuine Schneider Electric before it is listed.

What condition will the TM5SAO4L arrive in?

Units are supplied as refurbished by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units may also be available — confirm the condition grade when you request a quote.

How fast can Autronexa ship the TM5SAO4L?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability before ordering.

Does this module work with Modicon M241 and M258 platforms?

The datasheet lists compatible platforms as Modicon M241, M251, M258 and LMC058. Confirm your rack and channel assignment with our sourcing team before purchase.

Is the TM5SAO4L still supported by Schneider Electric?

The lifecycle status is listed as Active, last verified 2026-09. Contact Autronexa to confirm current OEM support status and availability.

Related & compatible parts

Schneider Electric

170CRA93201

Genuine surplus Schneider Electric 170CRA93201 S908 RIO adapter for Modicon Momentum — verified condition, faster than OEM lead…

In Stock

Schneider Electric · Advantys STB

STBDDI3610

Genuine surplus Schneider Electric STBDDI3610 digital input module — 6 channels, 24V DC, hot-swappable, verified condition and ready…

In Stock

Schneider Electric

TSXCANCA300

Genuine surplus Schneider Electric TSXCANCA300 CANopen cable, 300 m, IP20, IEC 60332-1 — verified condition and practical lead…

In Stock

Schneider Electric

BMXXBC015K

Genuine surplus BMXXBC015K X-bus expansion cable — 1.5 m, 9-pin SUB-D, verified condition, ready to ship.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TM5SAO4L

We reply within one business day.

TM5SAO4L Quote reply within 1 business day