Schneider Electric I/O & Function Modules

Schneider Electric 170LNT71000

Communication Adapter

Manufacturer: Schneider Electric Part Number: 170LNT71000

Genuine surplus Schneider Electric 170LNT71000 DeviceNet adapter for Modicon Momentum — verified condition, faster than OEM lead times.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Product Line Modicon Momentum
Communication Protocol DeviceNet
Transmission Rate 125, 250, and 500 kilobits per second
Network Topology Multi-drop trunk
Access Method CSMA/CA, Master/Slave, and peer-to-peer (P2P)
Electrical Connection One 5-pin DeviceNet connector
Transmission Cable Type Twisted pairs cable
Max Cable Distance Between Devices More than 1,640.4 feet (500 meters) based on transmission rate
Ambient Operating Temperature 0 to 60°C (non-condensing)
Protection Class IP20

Description

When a DeviceNet segment drops offline, every minute of downtime adds up. The 170LNT71000 communication adapter from Schneider Electric connects Modicon Momentum controllers to a DeviceNet network, and sourcing a genuine surplus or refurbished unit keeps your line running without waiting on OEM lead times.

What This Adapter Does in a Momentum System

This DeviceNet communication adapter links Modicon Momentum I/O and processors to a multi-drop trunk network. It supports transmission rates of 125, 250, and 500 kilobits per second, so you can match the adapter to the existing segment speed rather than re-engineering the network. The unit uses a single 5-pin DeviceNet connector and twisted-pair cabling, with a maximum cable distance between devices of more than 1,640.4 feet (500 meters) depending on the rate selected. Up to 64 devices can share one segment, which makes this adapter practical for long conveyor runs, remote I/O drops, and other distributed layouts where running individual home-run cables would be costly.

Figure 1: Front view of the Schneider Electric 170LNT71000 Communication Adapter showing its physical design and enclosure.

Technical Specs That Matter on the Floor

Three specifications drive most selection decisions for this adapter. First, the transmission rates of 125, 250, and 500 kbit/s let you keep an existing segment at its current speed; if your network runs at 500 kbit/s, the adapter supports it without a firmware change. Second, the ambient operating range of 0 to 60°C in a non-condensing environment covers most panel and enclosure conditions, while storage from -40 to 85°C handles shipping and unpowered periods. Third, the IP20 protection class means the adapter belongs inside a rated enclosure, not on an open machine frame. The unit also operates at altitudes below 16,404 feet (5,000 meters) and weighs 0.15 lb (0.07 kg), so it adds no meaningful load to a DIN rail or mounting plate.

Figure 2: Technical layout and connection details for the Schneider Electric 170LNT71000 Communication Adapter.

Why Genuine Surplus Fits This Adapter

DeviceNet adapters sit in the path of every I/O update on a segment, so a clone or mislabeled unit can cause intermittent faults that are hard to trace. Autronexa stocks genuine surplus and refurbished Modicon Momentum components, and each adapter is verified against OEM datasheet markings before it ships. For a part like this, refurbished means tested against OEM datasheet specifications and functionally verified by our sourcing team — not just cleaned and boxed. Because the adapter is a mature Modicon Momentum component, surplus stock often moves faster than a factory order, which matters when a segment is down. Contact Autronexa with your part number for verified condition and current availability.

Sourcing Checklist Before You Order

Confirm the exact part number on the existing adapter, including any suffix, because Modicon Momentum communication adapters share a common form factor but differ in protocol. Check that your segment runs DeviceNet and that the 5-pin connector matches the cabling in place. Decide whether you need a surplus unit or a refurbished one, and ask for the condition grade in writing. If you are replacing an adapter on a live segment, verify the transmission rate setting on the network before installation. Autronexa can cross-reference your existing unit and confirm compatibility before shipment.

Frequently asked questions

Is this a genuine Schneider Electric 170LNT71000, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it ships. We source genuine surplus and refurbished Modicon Momentum components, not grey-market copies.

What condition will the adapter arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available; ask for the condition grade in writing when you request a quote.

How fast can you ship the 170LNT71000?

Lead time depends on current stock. Contact Autronexa for current lead time and availability; surplus and refurbished units typically move faster than a factory order.

Does this adapter work with my existing DeviceNet segment?

The adapter supports DeviceNet at 125, 250, and 500 kbit/s over twisted-pair cable with a 5-pin DeviceNet connector. Confirm your segment speed and connector type before ordering.

Is the 170LNT71000 still supported by Schneider Electric?

Please verify current lifecycle status and availability with Autronexa before ordering. We can confirm OEM support status and offer a verified surplus alternative if needed.

Related & compatible parts

Schneider Electric

170ARM37030

Genuine surplus Schneider Electric 170ARM37030 relay I/O base — 10 inputs, 8 outputs, 24–230 V AC. Verified condition,…

In Stock

Schneider Electric

ATV610C25N4

Genuine surplus Schneider ATV610C25N4, 250 kW normal duty, 380...460 V three-phase, C3 EMC filter and VW3A1113 terminal —…

In Stock

Schneider Electric

ATV320U55N4B

Genuine surplus Schneider ATV320U55N4B 5.5 kW drive — verified condition, tested against OEM specs, ready to ship.

In Stock

Schneider Electric

170XTS10000

Genuine surplus Schneider Electric 170XTS10000 front labels for Modicon Momentum modules — verified condition, set of 10, ready…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 170LNT71000

We reply within one business day.

170LNT71000 Quote reply within 1 business day