ABB Communication Modules

ABB CI845

Ethernet networked

Manufacturer: ABB Part Number: CI845

Genuine surplus ABB CI845 Ethernet FCI module for Select I/O and S800 — verified, tested, and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSE075853R1
Communication Protocol Ethernet
Type Ethernet FCI Module
Master or Slave Slave
HART Yes
SOE Yes
Redundancy Yes
Hot Swap Yes
Input Voltage Range 19.2 ... 30 V
Power Dissipation 5 W
Operating Temperature -40 °C (-40 °F) to +70 °C (158 °F)
Protection Class IP20 acc. to IEC 60529
Dimensions (W x D x H) 30 mm x 121.7 mm x 135 mm
Weight (including base) 225 g

Description

The ABB CI845 is an Ethernet Fieldbus Communication Interface module that links S800 I/O and Select I/O to AC 800M controllers. For maintenance and procurement teams running ABB Ability System 800xA, a verified surplus or refurbished unit keeps redundant architectures intact without OEM lead-time delays.

What This Module Does in an ABB System

The CI845 acts as a slave communication interface, handling data exchange between I/O racks and the controller over Ethernet. It supports both Select I/O and S800 on the same network, accommodating up to 12 single or 12 redundant S800 I/O modules, or up to 192 Select I/O channels. Redundant configurations require two units installed in a TU860 or TU865 MTU, and the module supports hot swap — a practical advantage when replacing a failed unit in a running line. Built-in diagnostics cover internal hardware, communication, incoming power supplies A and B, and cabinet temperature, giving maintenance staff actionable fault data without external tools. HART v7 pass-through and Sequence of Events support are included, and the module carries ATEX and IECEx hazardous-area ratings for Zone 2 installations.

Figure 1: Front view of the ABB CI845 Ethernet networked showing its physical design and enclosure.

Technical Specifications That Matter on Site

The 19.2 to 30 V input voltage range with built-in power voting and supervision of both supply inputs allows the module to ride through common plant power variations. Galvanic isolation between the power supply and I/O modules protects sensitive field wiring from ground loops. At 5 W power dissipation, the unit adds minimal heat load inside sealed cabinets. The operating temperature range of -40 °C to +70 °C suits both climate-controlled control rooms and harsher field enclosures. Measuring 30 mm wide, 121.7 mm deep, and 135 mm high at 225 g including base, it fits standard Select I/O cabinet layouts without rework. A mechanical locking slider cuts power before removal, and mechanical keying prevents incorrect module insertion.

Figure 2: Technical layout and connection details for the ABB CI845 Ethernet networked.

Surplus Sourcing for This unit

ABB 800xA systems often stay in service for decades, and OEM lead times for communication modules can stretch well beyond planned maintenance windows. Autronexa supplies genuine surplus and professionally refurbished unit units tested against OEM datasheet specifications and functionally verified by our sourcing team. Each unit is checked for communication integrity, power supervision, and diagnostic function before dispatch. Because this module is often stocked as a critical spare, we help maintenance teams avoid the cost and delay of buying new from the OEM while keeping the original ABB form factor and firmware compatibility. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB CI845, or a clone?

Autronexa verifies every CI845 against OEM datasheet markings and part-number cross-reference. We supply genuine surplus and refurbished units only — no grey-market copies.

What condition will the CI845 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available — contact us for current stock and grading.

How fast can you ship the CI845?

Lead time depends on current stock. Contact Autronexa for verified availability and dispatch timing for your location.

Does the CI845 work with both Select I/O and S800?

Yes. The module supports both Select I/O and S800 on Ethernet, with capacity for up to 12 single or 12 redundant S800 I/O modules or up to 192 Select I/O channels.

Is the CI845 still supported by ABB?

Lifecycle status is not stated in our data. Please verify current lifecycle status and availability with Autronexa before ordering.

Related & compatible parts

ABB

SD833

Genuine surplus ABB SD833 power supply: 24 V DC, 10 A, 240 W, DIN-rail, SELV/PELV. Verified condition and…

In Stock

ABB

V18345-1010221001

Genuine surplus ABB TZIDC-120 valve positioner, 4–20 mA two-wire, IP 65, with analog feedback. Verified condition, ready to…

In Stock

ABB

DI830

Genuine surplus ABB DI830 16-channel digital input module for S800 I/O — verified condition, faster than OEM lead…

In Stock

ABB

TU814V1

Genuine surplus ABB TU814V1 termination unit — 16 I/O channels, 50 V rated, crimp snap-in connectors. Verified condition,…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: CI845

We reply within one business day.

CI845 Quote reply within 1 business day