ABB Communication Modules

ABB CI854B

High speed multipurpose bus protocol

Manufacturer: ABB Part Number: CI854B

Genuine surplus ABB CI854B PROFIBUS DP-V1 master interface with dual ports, line and master redundancy, and hot swap support.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Communication protocol PROFIBUS DP-V1
Master or slave Master
Number of channels 2
Transmission speed 9.6 - 12 000 kbit/s
Line redundancy Yes
Module redundancy Yes
Hot Swap Yes
24 V consumption typ. 190 mA
Operating temperature 0 to +55 °C (+32 to +131 °F)
Protection class IP20 according to EN60529, IEC 529

Description

When a PROFIBUS DP segment drops offline, every remote I/O rack and drive behind it stops reporting. The ABB CI854B communication interface restores that link for AC 800M controllers, and Autronexa supplies it as a verified genuine surplus module with clear lead times.

What This Interface Solves on an AC 800M

The CI854B connects PROFIBUS DP field devices — remote I/O, drives, low-voltage electrical equipment, and controllers — to the AC 800M controller. It runs PROFIBUS DP-V1 as a master with two DB female 9-pin channels, so one module can serve two segments or a redundant line pair. Transmission speed spans 9.6 to 12 000 kbit/s, letting you match the bus rate to cable length and device count rather than rebuilding the network. Each module is delivered with a unitK01 communication interface and a TP854 baseplate, so the mounting hardware arrives with the part. The module mounts on DIN rail and interfaces directly with the S800 I/O system and other PROFIBUS DP/DP-V1 and FOUNDATION Fieldbus proficient systems.

Figure 1: Front view of the ABB CI854B High speed multipurpose bus protocol showing its physical design and enclosure.

Redundancy and Hot Swap Without a Full Shutdown

A single master is a single point of failure. This unit supports line redundancy through its two PROFIBUS ports and master redundancy when two modules are paired; that master redundancy can be combined with CPU redundancy and CEXbus redundancy using the BC810. Hot swap support means a failed module can be replaced while the system stays powered, which shortens the window between fault detection and restored communication. The module draws typically 190 mA at 24 V and operates from 0 to +55 °C, with storage rated -40 to +70 °C. It carries CE marking, marine certificates from ABS, BV, DNV-GL and LR, and RoHS and WEEE compliance. Please verify current lifecycle status and availability with Autronexa before ordering.

Figure 2: Technical layout and connection details for the ABB CI854B High speed multipurpose bus protocol.

Why Genuine Surplus Fits This Module

OEM lead times on 800xA communication hardware can stretch well beyond a planned outage window. Autronexa stocks genuine surplus and refurbished ABB modules that are tested against OEM datasheet specifications and functionally verified by our sourcing team before dispatch. For a part that must match an existing CEXbus slot count — up to 12 units — and a specific controller firmware, a verified surplus unit keeps the configuration consistent without waiting on a factory order. Note the compatibility boundary: this module works only with System 800xA 6.0.3.2 and Compact Control Builder 6.0.0-2 and onwards. Confirm your controller and builder versions before ordering, and contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this CI854B a genuine ABB module or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference, including the CI854BK01 article number 3BSE069449R1, before it is listed as genuine surplus.

What condition will the module arrive in?

Units ship in the site default condition, Refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Each package includes the CI854BK01 communication interface and a TP854 baseplate.

How fast can Autronexa ship a CI854B?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; surplus and refurbished units are ready to ship once confirmed.

Does this module work with my AC 800M and 800xA version?

The CI854B is compatible only with System 800xA 6.0.3.2 and Compact Control Builder 6.0.0-2 and onwards. Confirm your controller and builder versions with Autronexa before ordering.

Can two CI854B modules be paired for redundancy?

Yes. Master redundancy uses two CI854B modules, and it can be combined with CPU redundancy and CEXbus redundancy via the BC810. The module also supports line redundancy through its two PROFIBUS ports.

Related & compatible parts

ABB

DO818

Genuine surplus ABB DO818 digital output module for S800 I/O — 32 channels, 24 V d.c., verified condition…

In Stock

ABB

CI920AS

Genuine surplus ABB CI920AS communication interface for S900 I/O — PROFIBUS DP-V1, ATEX Zone 1, verified and ready…

In Stock

ABB

SM812

Genuine surplus ABB SM812 safety module for intelligent controller supervision in SIL1-2 and 1oo2 SIL3 architectures. Verified condition.

In Stock

ABB

AI563

Genuine surplus ABB AI563 analog input module with 4 configurable thermocouple inputs. Verified condition and fast lead times…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: CI854B

We reply within one business day.

CI854B Quote reply within 1 business day