ABB Cables & Connectors

ABB DO818

Cable length 600 meters

Manufacturer: ABB Part Number: DO818

Genuine surplus ABB DO818 digital output module for S800 I/O — 32 channels, 24 V d.c., verified condition and practical sourcing support.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Signal specification 24 V d.c. (12 - 32 V d.c.), 0.5 A
Number of channels 32
Signal type Current sourcing, current limiting
Isolation Groupwise isolated from ground
Maximum field cable length 600 meters (656 yards)
Power dissipation Typ 2.8 W
Operating temperature 0 to +55 °C (+32 to +131 °F)
Protection class IP20 according to IEC 60529
Corrosion protection ISA-S71.04: G3

Description

The ABB DO818 is a 32-channel 24 V d.c. digital output module for the S800 I/O system, used by maintenance and automation teams to drive field devices such as relays, solenoids and contactors. Genuine surplus and refurbished units let you restore output capacity without waiting on OEM lead times or paying full list price.

What This S800 I/O Output Module Does

The DO818 sits in the S800 I/O family and provides 32 current-sourcing, current-limiting output channels. Each channel uses a high-side driver with short-circuit and over-temperature protection, inductive load suppression and optical isolation, so a fault on one field circuit stays contained instead of cascading through the rack. Outputs are split into two individually isolated groups of 16 channels, each with its own process voltage supervision input. That supervision signals a channel error through the ModuleBus when process power drops below 12 V, which shortens fault-finding and protects downstream equipment from silent failures. The module is rated for 24 V d.c. nominal, operating from 12 to 32 V d.c. at 0.5 A per channel, and the maximum field cable length is 600 meters — useful where field devices sit far from the cabinet. Power dissipation is typically 2.8 W, keeping panel heat load predictable.

Figure 1: Front view of the ABB DO818 Cable length 600 meters showing its physical design and enclosure.

Surplus Advantage: Why a Verified Refurbished Unit Pays Off

A failed output module stops production until a replacement is fitted, and OEM lead times on S800 I/O spares can stretch well beyond a planned maintenance window. Autronexa stocks genuine surplus and refurbished ABB modules, each tested against OEM datasheet specifications and functionally verified by our sourcing team before dispatch. For this unit that means the 12–32 V d.c. output range and 0.5 A per-channel rating are checked, not assumed. Buying refurbished instead of new typically reduces cost against OEM list price while keeping the original ABB design, protection circuitry and ModuleBus diagnostics intact. Because This unit is a 32-channel module, one verified unit can replace a whole group of failed outputs, which lowers the cost per restored channel compared with partial repairs or smaller modules. Surplus and refurbished, ready to ship — contact Autronexa with your part number for verified condition and current availability.

Selection and Sourcing Checks Before You Order

Match the article number 3BSE069053R1 and confirm the keying code EA before ordering, since This unit must seat correctly in a compatible MTU. ABB lists the TU818, TU819 and TU830 as matching terminal units; confirm which one your cabinet uses, because the wrong MTU adds cost and delay. Decide whether you need surplus or refurbished condition and ask for the grading in writing. Check the environmental fit: 0 to +55 °C operating range, IP20 protection and G3 corrosion protection suit controlled cabinets, but vertical mounting in a compact MTU limits ambient to 40 °C. Also confirm the 600-meter maximum field cable length covers your longest run. Please verify current lifecycle status and availability with Autronexa before ordering.

Frequently asked questions

Is this a genuine ABB DO818, or a clone or copy?

Autronexa supplies genuine ABB units. Each DO818 is verified against OEM datasheet markings and the article number 3BSE069053R1 before it is listed, so you receive an authentic module rather than a grey-market copy.

What condition will the DO818 arrive in?

Our default condition is refurbished: the module is tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units may also be available — ask for the condition grading in writing before you order.

How fast can Autronexa ship the DO818?

Lead time depends on current stock. Contact Autronexa with the part number for verified condition and current availability; we confirm the lead time before you commit.

Which MTUs does the DO818 work with?

ABB lists the TU818, TU819 and TU830 as matching MTUs for this module, with keying code EA. Confirm which terminal unit your cabinet uses before ordering to avoid a mismatch.

Is the DO818 still supported by ABB?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and availability before ordering.

Related & compatible parts

ABB

V18345-1010221001

Genuine surplus ABB TZIDC-120 valve positioner, 4–20 mA two-wire, IP 65, with analog feedback. Verified condition, ready to…

In Stock

ABB

V18345-1020121001

Genuine surplus ABB V18345-1020121001 positioner with HART, IP65 aluminium case, and 4–20 mA feedback — verified and ready…

In Stock

ABB · ABB Robots

3HAC031683-004

ABB 3HAC031683-004 Cables & Connectors. Product net weight is 3.02 kg. Gross weight is 3.44 kg. Supplied for…

Available on request

ABB

07 AC 91

Genuine surplus ABB 07 AC 91 analog I/O module for CS31 bus — 16 configurable channels, 12/8-bit modes,…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: DO818

We reply within one business day.

DO818 Quote reply within 1 business day