ABB V18345-1020121001
Electro-Pneumatic Positioner
Genuine surplus ABB V18345-1020121001 positioner with HART, IP65 aluminium case, and 4–20 mA feedback — verified and ready to ship.
- 12 Month
- Refurbished
- In Stock
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
5-15 days
Technical specifications
| Case / Mounting | Aluminium, varnished, IP 65 (NEMA 4X); linear to DIN/IEC 534 / NAMUR or rotary to VDI/VDE 3845 |
|---|---|
| Input / Communication Port | FSK module for HART communication |
| Explosion Protection | Without |
| Output / Safe Position | Single acting, fail safe |
| Connections | Cable: Thread 1/2-14 NPT; Air pipe: Thread 1/4-18 NPT |
| Analog Position Feedback | Plug-in module, signal range 4…20 mA |
| Mechanical Digital Feedback Kit | Without |
| Weight | 1.7 Kg |
| Operating Temperature Range | -40…+85 °C |
Description
How do you keep a control valve moving when the OEM lead time stretches into weeks and the line cannot wait? The ABB V18345-1020121001 electro-pneumatic positioner answers that question for maintenance and procurement teams who need a genuine, verified unit now. Autronexa supplies this model as tested surplus or refurbished stock, so you get authentic ABB hardware without the full new-part wait.
What This Positioner Does in the Loop
The V18345-1020121001 is a single-acting, fail-safe positioner built for linear actuators to DIN/IEC 534 or NAMUR and rotary actuators to VDI/VDE 3845. Its aluminium case is varnished to IP 65 (NEMA 4X), so washdown and dusty plant areas are less of a concern. The FSK module enables HART communication over the 4–20 mA signal line, letting technicians read and configure the unit without opening the housing. A plug-in analog feedback module reports position as a 4–20 mA signal, and the mechanical position indicator gives a quick visual check at the valve. Commissioning follows ABB’s single push-button philosophy, which shortens startup after a swap.

Technical Specs That Matter on the Floor
Three values drive most selection decisions here. First, the input is two-wire 4–20 mA with a nominal range and split-range configuration between 20% and 100%, so the unit fits standard control loops. Second, the air supply range is 1.4–6 bar (20–90 psi), with air consumption below 0.03 kg/h independent of supply pressure — a practical figure for plants watching instrument-air cost. Third, the operating temperature range of -40 to +85 °C covers outdoor and high-heat installations. Resolution exceeds 4000 steps with a 20 msec sample rate, and characteristic deviation stays at or below 0.5%. The unit carries ATEX, FM, CSA and IECEx approvals and suits SIL2 safety loops. This configuration has no explosion protection and no mechanical digital feedback kit.

Why Genuine Surplus Fits This Model
Positioners sit in the control path, so a clone or mislabelled unit creates calibration drift you cannot trace. Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. For a model with HART and analog feedback, that verification matters more than the box label. Surplus and refurbished, ready to ship — and when you need a second unit for a sister valve, ask about current stock rather than waiting on a factory order. Please verify current lifecycle status and availability with Autronexa before ordering.
Sourcing Checklist Before You Commit
Confirm the exact configuration against your valve: single-acting fail-safe output, 1/2-14 NPT cable and 1/4-18 NPT air connections, and the analog feedback module. Check whether your loop needs the HART FSK module or a plain analog unit, because the suffix codes differ. Decide between surplus and refurbished based on cosmetic expectations versus functional need — both arrive verified. Finally, confirm actuator supply pressure stays within 1.4–6 bar and never exceeds the actuator’s maximum operating pressure. Contact Autronexa with your part number for verified condition and current availability.
Frequently asked questions
Is this a genuine ABB V18345-1020121001, or a clone?
Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before stocking. We supply genuine surplus and refurbished ABB positioners, not grey-market copies.
What condition will the positioner arrive in?
The site default condition is Refurbished. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask us to confirm the specific condition of the unit on hand before you order.
How fast can you ship the V18345-1020121001?
Lead time depends on current stock. Contact Autronexa for current lead time and availability; surplus and refurbished units are ready to ship when in stock.
Does this unit support HART communication?
Yes. This configuration includes the FSK module for HART communication, and HART runs over the 20 mA signal line. The datasheet also lists HART Protocol 5.1 and a local connector for the LKS adapter.
Is the V18345-1020121001 still supported by ABB?
Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before ordering.
Related & compatible parts
ABB
TU811V1
Genuine surplus ABB TU811V1 compact MTU: 8 channels, 250 V, DIN-rail mounting, verified condition and fast lead times…
ABB
DI890
Genuine surplus ABB DI890 8-channel digital input module with intrinsic safety, NAMUR inputs, and S800 mechanics — verified…
ABB
SD831
Genuine surplus ABB SD831 power supply: 24 V DC, 3 A, 72 W, DIN-rail mount. Verified condition, faster…
ABB
07AI91
Genuine surplus ABB 07AI91 analog input module: 8 configurable channels for temperature or voltage on the CS31 system…
News & guides for ABB
ABB Buys Rotork: What the $5.5B Deal Means for Actuator Spares
ABB's $5.5 billion cash offer for Rotork, part-funded by the SoftBank robotics divestment, moves the group deeper into mission-critical flow…
Emerson Q4 FY2026: LNG Sales Up 68%, Semiconductor Up 43%, Software ACV at $1.7B
Emerson closed FY2026 with 7% sales growth and 14% underlying order growth. We verify what the 68% LNG, 43% semiconductor,…
Siemens MIS: A Specification Walkthrough for the Pre-Engineered Microgrid Switchboard
Siemens MIS published ratings, one-line interface responsibilities, UL 891 and UL 3141 scope, and what factory testing does and does…
Murata’s SWL RF Test Connector: What the 40% Claim Actually Covers
Murata Manufacturing announced on 29 October 2026 that its SWL series of RF and microwave coaxial connectors with a built-in…
Nexans 700 VDC Microgrid: What Changes for Factories and Spares
Nexans has switched part of its own AmpaCity global innovation hub in Lyon, France, onto a 700 V direct-current main distribution…
Orbit 60 PPM (142M8515): What the Module Does and What the 90% Load Warning Means
TL;DR: The Bently Nevada Orbit 60 Protection Processing Module (PPM) is the centralized compute engine of the protection system: it…
Intel Offers Korean AI Chip Firms Custom Design, Packaging and Foundry Routes
Intel used its own Seoul summit to offer Korean AI chip companies custom silicon, advanced packaging and foundry routes. No…
Bently Nevada AnomAlert: Motor Anomaly Detection Without Sensors
TL;DR: The Bently Nevada AnomAlert is a motor anomaly detector that watches a three-phase motor through its voltage and current…
