ABB I/O & Function Modules

ABB CI920AS

Sturdy

Manufacturer: ABB Part Number: CI920AS

Genuine surplus ABB CI920AS communication interface for S900 I/O — PROFIBUS DP-V1, ATEX Zone 1, verified and ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BDH000690R1
Signal Type Communication interface
Fieldbus Protocol PROFIBUS DP-V1 (IEC 61158)
HART Support Yes (HART over PROFIBUS DP-V1)
Redundancy Yes (power and communication)
Intrinsic Safety Yes
Hazardous Location ATEX Zone 1
Corrosive Atmosphere ISA-S71.04 G3
Operating Temperature -20 °C...60 °C
Dimensions (W×D×H) 20 mm × 104 mm × 104 mm
Weight 0.14 kg (0.31 lbs.)

Description

The ABB CI920AS (3BDH000690R1) is a communication interface for the S900 I/O system, coupling the internal CAN bus to PROFIBUS DP-V1. Maintenance and automation teams running S900 I/O in Zone 1 hazardous areas need this module to keep field devices communicating with the control system. Genuine surplus stock offers a practical alternative to OEM lead times without compromising on authenticity.

What the CI920AS Does in an S900 I/O System

This unit Communication Interface V 2.1 (CIPBA-Ex) sits at the heart of the S900 I/O remote system, translating between the internal CAN bus and the external PROFIBUS DP-V1 fieldbus (IEC 61158). This allows the S900 I/O system to communicate with the control system level while field devices connect through intrinsically safe interfaces. The module supports HART over PROFIBUS DP-V1 and provides electrical isolation between fieldbus and power circuits. For redundancy, use only unit units with the same firmware — always observe the Release Notes. The interface carries ATEX certification for Zone 1 installation and features G3-coating for corrosive atmospheres per ISA-S71.04. Hot-swap and hot-configuration-in-run capabilities mean you can replace or reconfigure the module without interrupting primary voltage, reducing downtime during maintenance windows.

Figure 1: Front view of the ABB CI920AS Sturdy showing its physical design and enclosure.

Why Genuine Surplus Makes Sense for This Interface

OEM lead times for S900 I/O communication modules can stretch weeks or months, especially for ATEX-certified variants. Autronexa maintains verified surplus and refurbished stock of This unit, each unit tested against OEM datasheet specifications and functionally verified by our sourcing team. The module’s hot-swap design simplifies replacement — you can exchange a faulty interface during operation without shutting down the primary voltage. Because This unit is used in Zone 1 hazardous areas, authenticity matters: a clone or grey-market unit may lack proper ATEX certification and G3-coating, putting your entire installation at risk. Genuine surplus units carry the original ABB markings and traceable article number 3BDH000690R1. For engineers supporting S900 I/O systems, this is a practical way to secure a verified spare without waiting on factory allocation.

Figure 2: Technical layout and connection details for the ABB CI920AS Sturdy.

Buyer’s Checklist for This unit

Before ordering, confirm the exact firmware version required for your redundancy setup — the datasheet specifies that only unit units with matching firmware should be used together for PROFIBUS DP-V1 redundancy. Verify that your application requires the CIPBA-Ex variant for Zone 1 installation. Check the condition grade: Autronexa supplies refurbished units by default, tested and functionally verified. Confirm compatibility with your existing S900 I/O rack and PROFIBUS DP-V1 network. The module measures 20 mm wide by 104 mm deep by 104 mm high and weighs 0.14 kg, so it fits standard S900 mechanics. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB CI920AS, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. The CI920AS carries the original ABB article number 3BDH000690R1 and ATEX certification for Zone 1 installation.

What condition will the CI920AS arrive in?

Autronexa supplies refurbished units by default. Each module is tested against OEM datasheet specifications and functionally verified by our sourcing team before shipping.

How fast can you ship the CI920AS?

Contact Autronexa for current lead time. Surplus stock availability varies, and we confirm shipping dates based on verified inventory at the time of your request.

Does the CI920AS support redundancy?

Yes. The module supports power and communication redundancy. For PROFIBUS DP-V1 redundancy, use only CI920AS units with the same firmware — always observe the Release Notes.

Is the CI920AS still supported by ABB?

Contact Autronexa to verify OEM support status. We can confirm lifecycle information and availability for the CI920AS based on current sourcing data.

Related & compatible parts

ABB

DI825

Genuine surplus ABB DI825, 8-channel 125 V d.c. digital input for S800 I/O, individually isolated, verified and ready…

In Stock

ABB

TU835V1

Genuine surplus ABB TU835V1 8-channel MTU with 50V rating and DIN rail mount — verified condition, ready to…

In Stock

ABB

AI810

Genuine surplus ABB AI810 analog input module — 8 channels, 12-bit, verified condition, ready to ship from Autronexa.

In Stock

ABB

DI880

Genuine ABB DI880 16-channel digital input module — surplus and refurbished, verified condition, ready to ship.

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: CI920AS

We reply within one business day.

CI920AS Quote reply within 1 business day