ABB Communication Modules

ABB CI857

Typically 500 ms

Manufacturer: ABB Part Number: CI857

Genuine surplus ABB CI857 INSUM module for AC 800M — verified condition, faster lead time than OEM, and practical sourcing support from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSE018144R1
Communication Protocol ABB's INSUM
Transmission Speed 10 Mbit/s
Connector RJ-45 female (8-pin)
Hot Swap Yes
Max Units on CEX Bus 6
Operating Temperature 0 to +55 °C (+32 to +131 °F)
Protection Class IP20 according to EN60529, IEC 529
Dimensions (W×H×D) 59 mm × 185 mm × 127.5 mm
Weight (including base) 700 g

Description

How quickly can an AC 800M controller integrate switchgear data without adding external power supplies or complex wiring? The ABB CI857 is an INSUM communication module for the AC 800M controller family, designed for maintenance and automation teams integrating motor control units and other INSUM devices. As a genuine surplus or refurbished unit, it offers a practical alternative to OEM lead times while keeping the control architecture intact. The module draws power directly from the processor unit via the CEX-Bus, so no additional external supply is required.

What the CI857 Does in an AC 800M System

This unit acts as a master on ABB’s INSUM protocol, using standard Ethernet technology to extend communication distances and support multidrop configurations. It handles time distribution and time stamping in switchgear applications, and the typical speed for one closed loop is 500 ms, assuming a 250 ms cycle time in control execution. AC 800M controllers access INSUM functions through function blocks in the INSUM Communication Library. The module supports up to 128 MCUs or other INSUM devices per unit, and up to 2 INSUM TCP/IP gateways per module. A single AC 800M can host up to 6 unit modules, with a maximum of 256 INSUM devices when using PM864 or PM866 processors, or 128 devices with PM861. The RJ-45 female connector and 10 Mbit/s transmission speed keep integration straightforward for engineers familiar with Ethernet-based control networks.

Figure 1: Front view of the ABB CI857 Typically 500 ms showing its physical design and enclosure.

Surplus Advantage for This unit

OEM lead times for legacy ABB communication modules can stall maintenance schedules, especially when a single failed module holds up switchgear integration. Autronexa maintains verified surplus and refurbished stock of This unit, tested against OEM datasheet specifications and functionally verified by our sourcing team. The module is hot-swappable, which means replacement can be done without shutting down the controller — a practical benefit when uptime matters. Because the unit is powered via the CEX-Bus, there is no need to source or wire an external power supply, simplifying the swap. Refurbished units arrive with the same form factor and connector layout as the original, so they drop into existing CEX-Bus slots without modification. For teams comparing against brand-new distributor pricing, surplus offers a cost-effective path to genuine parts, verified.

Figure 2: Technical layout and connection details for the ABB CI857 Typically 500 ms.

Sourcing Checklist Before You Order

Before committing to a unit, confirm the exact article number 3BSE018144R1 and check that your AC 800M processor model supports the intended number of INSUM devices — PM861 limits you to 128, while PM864 and PM866 allow up to 256. Verify the condition grade: surplus units may show cosmetic wear but are functionally tested, while refurbished units are cleaned and checked against OEM specifications. Confirm that your application uses ABB’s INSUM protocol and not another fieldbus. The module operates from 0 to +55 °C and carries CE marking and RoHS compliance, so environmental and regulatory requirements are already addressed. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB CI857, or a clone?

Autronexa verifies every CI857 against OEM datasheet markings and part-number cross-reference. We source only genuine surplus and refurbished units, not grey-market clones.

What condition will the CI857 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units may also be available — contact us for current condition options.

How fast can you ship the CI857?

Lead time depends on current stock. Contact Autronexa for current lead time and availability — we prioritize genuine surplus and refurbished units ready to ship.

Does the CI857 work with my existing AC 800M processor?

The CI857 is used together with HI Controllers and supports up to 256 INSUM devices with PM864 or PM866, or 128 devices with PM861. Confirm your processor model before ordering.

Related & compatible parts

ABB

CI862

Genuine surplus ABB CI862 CEX module connects up to 30 TRIO blocks per LAN, redundant-capable, for AC 800M…

In Stock

ABB

DI880

Genuine ABB DI880 16-channel digital input module — surplus and refurbished, verified condition, ready to ship.

In Stock

ABB

CI867A

Genuine surplus ABB CI867A Modbus TCP module for AC 800M — verified, tested, and ready to ship from…

In Stock

ABB

DI801

Genuine surplus ABB DI801 digital input module — 16 channels, 24 V d.c., S800 I/O. Verified condition, tested,…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: CI857

We reply within one business day.

CI857 Quote reply within 1 business day