ABB Servo Drives & Motors

ABB DO815

Driver

Manufacturer: ABB Part Number: DO815

Genuine surplus ABB DO815 8-channel 24 V digital output module for S800 I/O — verified condition, faster lead times than OEM.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSE013258R1
Signal Specification 24 V d.c. (10 - 32 V d.c.), 2 A
Number of Channels 8 (two isolated groups of 4)
Signal Type High side driver, current limiting
Isolation Groupwise isolated from ground
Maximum Field Cable Length 600 meters (656 yards)
Operating Temperature 0 to +55 °C (+32 to +131 °F)
Protection Class IP20 according to IEC 60529
Dimensions 45 mm W x 102 mm D x 119 mm H
Weight 0.2 kg (0.44 lbs.)

Description

How do you keep an S800 I/O rack running when a digital output module fails and the OEM lead time stretches into weeks? The ABB DO815 answers that problem: an 8-channel 24 V d.c. current-sourcing output module for the S800 I/O family, built for maintenance teams and automation engineers who need dependable field output control without waiting on factory allocation. Genuine surplus and refurbished units give you a practical path to restoring I/O capacity.

What the DO815 Does in an S800 I/O Rack

The module drives eight 24 V d.c. outputs from a single S800 slot, with the outputs split into two individually isolated groups of four channels. Each channel is a high-side driver with short-circuit and overload protection, open-load detection on active signal, inductive load suppression and optical isolation. The signal specification is 24 V d.c. (10 – 32 V d.c.) at 2 A, and the outputs handle filament lamp loads up to 10 W. Front LEDs report fault, run, warning, OSP and per-channel status, so a technician can identify a failed channel without pulling the card. Two fault operation modes — automatic reset and fault latching — let you match the module’s behaviour to the process. The unit is keyed AA and fits MTUs TU810, TU812, TU814 and TU830.

Figure 1: Front view of the ABB DO815 Driver showing its physical design and enclosure.

Why Genuine Surplus Fits This Module

S800 I/O racks stay in service long after individual cards become hard to source new. A refurbished unit is tested against OEM datasheet specifications and functionally verified by our sourcing team, so you get a known-good module rather than an untested pull. For plants carrying spares budgets, surplus and refurbished stock often shortens the wait compared with OEM allocation. The module carries CE marking, RoHS compliance under DIRECTIVE/2011/65/EN (EN 50581:2012), and corrosion protection to ISA-S71.04: G3 — details worth confirming against your cabinet environment before you commit.

Sourcing Checks Before You Order

Confirm three things: the article number 3BSE013258R1 matches your rack documentation, the MTU in use is one of the four compatible types, and the operating temperature range suits your enclosure — 0 to +55 °C, with approvals issued for +5 to +55 °C. If the card sits in a compact MTU mounted vertically, note the reduced 40 °C ambient limit. Ask for the condition grade and any test record with your quote. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine ABB DO815, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. The DO815 carries article number 3BSE013258R1, and we confirm that marking on the module you receive.

What condition will the DO815 arrive in?

Our default is refurbished: the module is tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask for the condition grade and any available test record when you request a quote.

How fast can you ship the DO815?

Contact Autronexa for current lead time. Stock levels on S800 I/O modules change quickly, so we confirm availability and dispatch timing against your part number before you order.

Which MTUs does this module work with?

The DO815 is keyed AA and is listed for use with MTU types TU810, TU812, TU814 and TU830. Confirm your existing MTU before ordering, since the module seats only in a matching base.

Is the DO815 still supported by ABB?

Contact Autronexa to verify OEM support status for this article number. We can also advise on sourcing alternatives within the S800 I/O family if support has changed.

Related & compatible parts

ABB

07 KT 94

Genuine surplus ABB 07 KT 94 Advant Controller with 24 DI, 16 DO, 8 AI/O, 4 AO —…

In Stock

ABB

AI931S

Genuine surplus ABB AI931S analog input module — 4-channel 4...20 mA, HART, ATEX Zone 1, verified condition and…

In Stock

ABB

DI581-S

Genuine surplus ABB DI581-S safety digital input module, 16SDI, SIL2/SIL3, 24VDC — verified condition and clear lead times…

In Stock

ABB

CI520V1

Genuine ABB CI520V1 AF100 communication interface — surplus/refurbished, verified condition, faster than OEM lead time.

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: DO815

We reply within one business day.

DO815 Quote reply within 1 business day