ABB Cables & Connectors

ABB TU849

Termination Unit

Manufacturer: ABB Part Number: TU849

Genuine surplus ABB TU849 termination unit for redundant TB840/TB840A modem pairs — verified condition, practical sourcing support.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSE042560R1
Power Input 24 V d.c (19.2–30 V)
ModuleBus Current Distribution Maximum 5 V 1.5 A; 24 V 1.5 A
Acceptable Wire Sizes Solid: 0.2–2.5 mm²; Stranded: 0.2–2.5 mm², 24–12 AWG
Recommended Torque 0.5 Nm
Operating Temperature 0 to +55 °C (approvals issued for +5 to +55 °C)
Ingress Protection IP20 according to IEC 60529
Dimensions (W × H × D) 124 mm × 186.5 mm × 47 mm
Weight 0.45 kg

Description

When a redundant ModuleBus link drops on a running process controller, the fix usually starts at the termination unit. The ABB TU849 termination unit (article number 3BSE042560R1) is the passive mounting base that carries dual 24 V d.c. power to a pair of TB840/TB840A optical modems and routes a single electrical ModuleBus connection, so maintenance teams keep a verified spare on the shelf rather than waiting on OEM allocation.

Where This Unit Sits in the ModuleBus Chain

The TU849 is a module termination unit built for redundant modem configurations. It provides separate power supply connections for each modem, one electrical ModuleBus port, and two module positions for TB840/TB840A units. A rotary switch sets the cluster address from 1 to 7, which lets a technician place the unit in an existing cluster without rewiring the bus. Four mechanical keys, two per position with six settings each, give 36 possible configurations and block insertion of the wrong module type — a practical safeguard during late-shift swaps when the correct modem is grabbed in a hurry. The unit is passive, so there is no firmware to load and no configuration file to match; service work is mechanical and electrical only.

Figure 1: Front view of the ABB TU849 Termination Unit showing its physical design and enclosure.

What the Datasheet Confirms for Service Planning

Power input is 24 V d.c. across a 19.2–30 V range, and the unit distributes up to 1.5 A on both the 5 V ModuleBus rail and the 24 V rail. Field wiring accepts solid or stranded conductors from 0.2 to 2.5 mm² (24–12 AWG) with a recommended torque of 0.5 Nm, so terminal checks can be done with a standard torque driver. The housing measures 124 mm wide, 186.5 mm high including the latch, and 47 mm deep at 0.45 kg, and mounts vertically or horizontally on standard DIN rail with a screwdriver-operated latch that also provides grounding. Operating temperature is 0 to +55 °C, with approvals issued for +5 to +55 °C; for vertical mounting the maximum ambient is 40 °C. Ingress protection is IP20, and the unit carries CE marking, ATEX Zone 2 and cULus hazardous-location ratings, plus ABS, BV, DNV-GL and LR marine certificates.

Why a Verified Surplus Unit Fits This Part

Termination units rarely fail from electronics; they fail from terminal torque loss, latch wear, or mechanical key damage after repeated module changes. That makes a tested refurbished unit a sensible spare: our sourcing team checks each one against the OEM datasheet specifications and functionally verifies it before it ships. Because This unit is a passive base rather than a smart module, condition is easy to confirm visually and electrically — key positions, rotary switch detents, DIN latch action, and terminal condition all tell the story. Autronexa holds surplus and refurbished stock of ABB ModuleBus hardware, so a maintenance planner can compare a verified unit against OEM lead time and list price without committing to a full new-build order. Confirm the exact article number 3BSE042560R1 and your cluster address requirement when enquiring.

Frequently asked questions

Is this ABB TU849 a genuine unit or a copy?

Autronexa verifies each unit against OEM datasheet markings and the article number 3BSE042560R1 cross-reference before it enters stock. We supply genuine surplus and refurbished automation components, not clones.

What condition will the TU849 arrive in?

The site default condition is Refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask us for the specific condition grade of the unit currently in stock.

How fast can you ship a TU849 termination unit?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability before ordering.

Does the TU849 support redundant modem configurations?

Yes. The datasheet describes it as a termination unit with dual power supply connections for two TB840/TB840A modems, line redundancy, and a single electrical ModuleBus connection for non-redundant I/O.

Is the TU849 still supported by ABB?

Lifecycle status is not stated in our data. Please verify current lifecycle status and availability with Autronexa before ordering.

Related & compatible parts

ABB

DI831

Genuine surplus ABB DI831 16-channel 48 V d.c. digital input module for S800 I/O — verified condition, practical…

In Stock

ABB

AI931B

ABB AI931B I/O & Function Modules. Signal type: 4...20 mA; Mechanics: S900. Number of channels is 4. New…

Available on request

ABB

DP820

Genuine surplus ABB DP820 two-channel pulse counting module for incremental transmitters up to 1.5 MHz — verified condition,…

In Stock

ABB

CI869

Genuine surplus ABB CI869 AC 800M communication interface for AF 100 — verified condition, tested, and ready to…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: TU849

We reply within one business day.

TU849 Quote reply within 1 business day