ABB Cables & Connectors

ABB TB806

ModuleBus Cable Adaptor

Manufacturer: ABB Part Number: TB806

Genuine surplus ABB TB806 ModuleBus Cable Adaptor — verified condition, tested against OEM specs, ready to ship for ModuleBus extension.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Article Number 3BSE008536R1
Mechanics S800
Operating Temperature 0 to +55 °C (Storage -25 to +70 °C)
Relative Humidity 5 to 95 %, no condensation
Protection Class IP20 according to IEC 60529
Corrosion Protection ISA-S71.04: G3
Dimensions (W × D × H) 22 mm × 25 mm × 109 mm
Weight 46 g
Hazardous Location C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2

Description

When a ModuleBus segment needs to span more than one DIN rail, the ABB TB806 ModuleBus Cable Adaptor (article number 3BSE008536R1) extends the electrical ModuleBus so I/O modules can be distributed across separate rails. Maintenance and procurement teams choose genuine surplus or refurbished units like this one to avoid OEM lead times and list-price premiums while keeping the S800 architecture intact.

What This Adaptor Does in an S800 System

The TB806 is a mechanical and electrical adaptor in ABB’s S800 mechanics family. It works together with the TB805 and TK801V0xx cable set to extend the ModuleBus, letting I/O modules on the same electrical bus sit on different DIN rails. The same adaptor can also pair with the TB842 for an optical extension of the ModuleBus. For a retrofit or panel expansion, that flexibility often removes the need to rewire an entire rail — a direct saving in labour hours and cable cost. The unit measures 22 mm wide, 25 mm deep and 109 mm high, and weighs 46 g, so it adds minimal panel depth and shipping weight. Its IP20 rating per IEC 60529 suits it to inside-enclosure mounting, and Class I earth-protected construction per IEC 61140 supports a safe installation when the panel is properly earthed.

Figure 1: Front view of the ABB TB806 ModuleBus Cable Adaptor showing its physical design and enclosure.

Environmental Ratings and Their Cost Implication

The adaptor carries a corrosion-protection rating of ISA-S71.04: G3, which tells you it is specified for moderately corrosive environments rather than clean control rooms alone. In practice, that rating can reduce premature replacement cost in plants with sulphur-bearing or humid air. The operating window is 0 to +55 °C with 5 to 95 % relative humidity, non-condensing, per IEC/EN 61131-2; storage spans -25 to +70 °C. Pollution degree 2 per IEC 60664-1 and overvoltage categories per IEC/EN 60664-1 define the clearance assumptions your panel design must respect. EMC performance follows EN 61000-6-4 and EN 61000-6-2, so the adaptor is built to the same emission and immunity standards as the surrounding S800 hardware. CE marking is stated, and electrical safety is referenced to IEC 61131-2, UL 61010-1 and UL 61010-2-201. Hazardous-location approvals cover C1 Div 2 cULus, C1 Zone 2 cULus and ATEX Zone 2, and marine certification includes ABS, BV, DNV and LR — ratings that matter when a single part number must satisfy several site standards at once. RoHS compliance under EU, UAE and CN schemes and WEEE compliance under DIRECTIVE/2012/19/EU round out the compliance picture. Each of these ratings is a qualification cost you avoid re-testing when you fit a verified unit.

Figure 2: Technical layout and connection details for the ABB TB806 ModuleBus Cable Adaptor.

Why Buy This Adaptor as Genuine Surplus

ABB S800 hardware is widely installed, and adaptors like this are regularly pulled from decommissioned panels in working condition. A refurbished unit from Autronexa is tested against OEM datasheet specifications and functionally verified by our sourcing team, so you get a genuine part rather than a grey-market copy. Compared with a factory-new order, surplus stock typically shortens the wait and lowers the unit cost — useful when a single adaptor is holding up a rail extension. Because This unit is a small, low-weight item, it also ships economically. Please verify current lifecycle status and availability with Autronexa before ordering, since ABB’s support position can change over time.

Sourcing Checklist Before You Order

Confirm the article number 3BSE008536R1 matches your bill of materials, and check whether your extension uses the TB805/TK801V0xx cable route or the TB842 optical route — the adaptor supports both, but the mating hardware differs. Decide whether you need surplus or refurbished condition and state it on the request. Ask for the unit’s test record and any visible marking details. Contact Autronexa with your part number for verified condition and current availability; our team works with ABB S800 systems daily and can confirm compatibility with your existing rail layout.

Frequently asked questions

Is this TB806 a genuine ABB adaptor or a clone?

Autronexa verifies each unit against OEM datasheet markings and the article number 3BSE008536R1 before it enters stock. We do not source grey-market copies.

What condition will the TB806 arrive in?

Our default condition is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available — state your preference when you request a quote.

How fast can you ship the TB806?

Lead time depends on current stock. Contact Autronexa for the current lead time and availability for this adaptor before placing your order.

Does the TB806 work with both the TB805 cable extension and the TB842 optical extension?

Yes. Per ABB's description, the adaptor is used with TB805 and TK801V0xx to extend the electrical ModuleBus, and can also be used with TB842 to provide an optical extension.

Is the TB806 still supported by ABB?

Lifecycle status is not stated in our current data. Contact Autronexa to verify OEM support status and availability before ordering.

Related & compatible parts

ABB

CI865

Genuine surplus ABB CI865 module for AC 800M — bridges Satt I/O with hot-swap support. Verified condition, ready…

In Stock

ABB · ABB Robots

3HAC031683-004

ABB 3HAC031683-004 Cables & Connectors. Product net weight is 3.02 kg. Gross weight is 3.44 kg. Supplied for…

Available on request

ABB

AO820

Genuine surplus ABB AO820 analog output module — 4 isolated channels, verified condition, faster lead times than OEM.

In Stock

ABB

INNPM22

Genuine surplus ABB INNPM22 network processor for Symphony Infi 90 — verified condition and faster lead time than…

In Stock

News & guides for ABB

View all articles

Request a quote for this part

Part number: TB806

We reply within one business day.

TB806 Quote reply within 1 business day