Bently Nevada

Bently Nevada 32000-16-05-08-070-03-02

Proximity Probe Housing

Manufacturer: Bently Nevada Part Number: 32000-16-05-08-070-03-02

Bently Nevada 32000-16-05-08-070-03-02 Proximity Probe Housing. Probe Penetration: 70 mm; Standoff Adapter: 80 mm.

  • New Surplus
  • Available on request
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

Ships within 7 business days

Technical specifications

Manufacturer Bently Nevada
Product No. 32000-16-05-08-070-03-02
Product Type 32000 Metric Proximity Probe Housing
Standoff Adapter Option 08 = 80 mm
Probe Penetration Option 070 = 70 mm
Probe Option, With Connector 16 = 3300 XL 8 mm probe
Probe Cable Length Option 05 = 0.5 m (20 in)
Fittings Option 03 = Two plugs, one M20 fitting, and one cable seal grip with grommets for armored probe cable
Mounting Thread Option 02 = 3/4-14 NPT (Required if ordering Standoff Adapter Option)
Protection Ratings Type 4X rating certified by Canadian Standards Association (CSA). IP66 rating verified by SC115582-1 (e) 106. CENELEC standard EN50014 rating for electrostatic dissipation of a plastic material located in a hazardous area.
Housing Material Glass-reinforced Polyphenylene Sulfide (PPS) thermoplastic containing conductive fibers
Sleeve Material and Retaining Chain AISI 304 stainless steel
Outer Sleeve and Exterior Screws AISI 303 stainless steel
O-Ring Material Neoprene®
Recommended Torque (retaining nut) 29.4 N·m (260 in·lb)
Housing Impact Strength Certified by BASEEFA to withstand two separate 4 Joule (3.0 ft·lb) impacts at -39°C (-38°F) and at 115 °C (239°F). Samples of the housing and cover were verified by CSA to withstand a 7 Joule (5.2 ft·lb) impact at ambient room temperature.
Temperature Rating -51°C to +105°C (-60°F to +221°F)
Weight 1.2 kg (2.6 lb) typical

Description

The Bently Nevada Bently Nevada 32000-16-05-08-070-03-02 Proximity Probe Housing – Datasheet, Specs & In Stock is a 32000 metric proximity probe housing supplied for replacement and new-build use in industrial control installations. Every rating below is taken from the manufacturer documentation for this part number. Headline figures: weight 1.2 kg (2.6 lb) typical

Mechanical & Dimensional Data

Probe Cable Length Option is 05 = 0.5 m (20 in). take this measurement into account when setting panel depth, rail position or enclosure clearance, since oversize is the normal reason a correct part will not physically fit. Mounting Thread Option is 02 = 3/4-14 NPT (Required if ordering Standoff Adapter Option). verify the mating thread and fitting size on site before ordering, because these are not interchangeable across the series. Sleeve Material and Retaining Chain is AISI 304 stainless steel. the material determines corrosion behaviour and thermal performance in the installed environment. O-Ring Material is Neoprene®. the material determines corrosion behaviour and thermal performance in the installed environment. Recommended Torque (retaining nut) is 29.4 N·m (260 in·lb). apply this value at installation; under-torquing leaks and over-torquing cracks the housing. Housing Impact Strength is Certified by BASEEFA to withstand two separate 4 Joule (3.0 ft·lb) impacts at -39°C (-38°F) and at 115 °C (239°F). Samples of the housing and cover were verified by CSA to withstand a 7 Joule (5.2 ft·lb) impact at ambient room temperature.. the material determines corrosion behaviour and thermal performance in the installed environment. Weight is 1.2 kg (2.6 lb) typical. factor this into lifting, rail-loading and shipping decisions; it is also the figure to quote when a handling study is required.

Environmental & Compliance Ratings

Temperature Rating is -51°C to +105°C (-60°F to +221°F). compare this against the requirement it must satisfy in the application before release to site.

Ordering & Configuration

Standoff Adapter Option is 08 = 80 mm. order by the exact option code shown; variants of the same base number are not interchangeable. Probe Penetration Option is 070 = 70 mm. order by the exact option code shown; variants of the same base number are not interchangeable. Probe Option, With Connector is 16 = 3300 XL 8 mm probe. order by the exact option code shown; variants of the same base number are not interchangeable. Fittings Option is 03 = Two plugs, one M20 fitting, and one cable seal grip with grommets for armored probe cable. verify the mating thread and fitting size on site before ordering, because these are not interchangeable across the series.

Additional Verified Data

Product No. is 32000-16-05-08-070-03-02. Protection Ratings is Type 4X rating certified by Canadian Standards Association (CSA). IP66 rating verified by SC115582-1 (e) 106. CENELEC standard EN50014 rating for electrostatic dissipation of a plastic material located in a hazardous area. Outer Sleeve and Exterior Screws is AISI 303 stainless steel.

Models in This Series

Autronexa lists 4 other models in the same 32000 metric proximity probe housing entry, and they share this datasheet. Use them to identify the variant that matches the equipment on site: Bently Nevada 32000-16-05-08-130-03-02 Proximity Probe Housing – Datasheet, Specs & In Stock, Bently Nevada 32000-16-05-05-080-03-02 Proximity Probe Housing – Datasheet, Specs & In Stock, Bently Nevada 32000-16-05-04-135-03-02 Proximity Probe Housing – Datasheet, Specs & In Stock, Bently Nevada 32000-16-05-00-080-03-02 Proximity Probe Housing – Datasheet, Specs & In Stock.

Confirming the Correct Variant Before Ordering

Read the part number marked on the unit being replaced and compare it character by character with the ordering code above, including any option suffix. Check the values in the technical specification table of this page against the nameplate on the existing unit rather than against a previous purchase record.

Request a Quote

Bently Nevada supplies the Bently Nevada 32000-16-05-08-070-03-02 Proximity Probe Housing – Datasheet, Specs & In Stock as a quote-based item. Send the part number, quantity and destination for current stock, lead time and pricing; no fixed price is published for this part.

Frequently asked questions

What is the Bently Nevada 32000/16 probe housing?

It is the 31000-series proximity-probe housing assembly used to mount and protect Bently Nevada proximity probes in machine installations.

What probe configurations use the 32000/16 housing?

It is used with standard 3300-series proximity probes in machine-case and pedestal mounting arrangements for radial and axial shaft measurements.

Is the 32000/16 housing suitable for hazardous areas?

Hazardous-area versions are offered; confirm the specific option code on the ordered part number for the required certification.

How is the 32000/16 installed?

It is mounted to the machine casing or bracket using the supplied hardware, with the probe inserted through the housing to the specified target gap.

Are spare probes and cables available for the 32000/16?

Yes. Bently Nevada supplies matching extension cables and proximity probes as separate spare parts; order by the specific model number.

What are the dimensions and weight of the 32000-16-05-08-070-03-02?

The Bently Nevada 32000-16-05-08-070-03-02 measures dimensions documented in the datasheet and weighs 1.2 kg (2.6 lb) typical. Confirm clearance and rack or panel space before ordering.

What is the 32000-16-05-08-070-03-02 and what is it used for?

The Bently Nevada 32000-16-05-08-070-03-02 is a 32000 Metric Proximity Probe Housing device. It is used in industrial control and automation systems where a verified part number and specification match are required for replacement or new design.

How much does the Bently Nevada 32000-16-05-08-070-03-02 Proximity Probe Housing - Datasheet, Specs & In Stock weigh?

The documented weight is 1.2 kg (2.6 lb) typical.. Use it for lifting, rail-loading and shipping decisions, and quote it when a handling study is required for the installation.

Related & compatible parts

Bently Nevada · 3500

3500/94M 184826-01

Bently Nevada 3500/94M 184826-01 3500 System Module. Directive: 2014/30/EU; Directive: 2014/35/EU. Supplied for MRO and OEM replacement use.

Available on request

Bently Nevada · 3500/40M

3500/40M-01-00

Bently Nevada 3500/40M-01-00 Proximitor/Seismic Monitor. Hazardous Area Approval: 00 — None; Category: Monitor order code.

Available on request

Bently Nevada · 3500/40M

129525-0005-01

Bently Nevada 129525-0005-01 Transducer Cable. Cable Length: 5 feet (1.5 metres); Assembly: Not assembled.

Available on request

Bently Nevada

330302-000-011-10-90-01-00

Bently Nevada 330302-000-011-10-90-01-00 Proximity Probes & Sensors. Unthreaded Length: 0mm; Overall Case Length: 11mm.

Available on request

News & guides for Bently Nevada

View all articles

Request a quote for this part

Part number: 32000-16-05-08-070-03-02

We reply within one business day.

32000-16-05-08-070-03-02 Quote reply within 1 business day