Bently Nevada Vibration Monitoring 3500
Bently Nevada 3500/94M 184826-01
3500 System Module
Bently Nevada 3500/94M 184826-01 3500 System Module. Directive: 2014/30/EU; Directive: 2014/35/EU. Supplied for MRO and OEM replacement use.
- Available on request
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
Technical specifications
| Part Number | 184826-01 |
|---|---|
| Model | 3500/94M Main Module |
| Manufacturer | Bently Nevada |
| Condition | New & Original in Factory Packing |
| Factory Warranty | 12 Months |
| Power | consumption 4.6 watts max. |
| High-speed | network Monitor status, data and values |
| RS232 port | (I/0) Touch controller data |
| OK LED Indicates proper operation of | the module |
| Indicates communications | between other system modules VGA port (I/O) Analog red, green, blue and sync signals to the display Front Port 24 Vdc Power out, VGA signal out, Touch commands in. |
| Temperature | -20°C to 65°C (-22°F to 149°F) |
| Temperature | -40°C to 85°C (-40°F to 185°F) Humidity 95%, non-condensing |
| Directive | 2014/30/EU |
| Directive | 2014/35/EU |
| RoHS Directive | 2011/65/EU |
| Dimensions | (height x width x depth) 241.3 mm x 24.4 mm x 241.8 mm (9.5 in x 0.96 in x 9.52 in) |
| Ordering Considerations | Firmware, Software, and Hardware |
| Config) Rev 5.6 | 3500/02 Software (Op |
| Display) Rev 2.21 | 3500/03 Software (Data |
| Acquisition) Rev 1.22 | The 3500/94M requires the following hardware: 3500/22 TDI - Transient Data Interface |
Description
The Bently Nevada 3500/94M 184826-01 is a 3500 system module for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against programmable alarm setpoints inside the 3500 rack. Dimensions are (height x width x depth) 241.3 mm x 24.4 mm x 241.8 mm (9.5 in x 0.96 in x 9.52 in) It monitors critical rotating equipment such as turbines, compressors, and pumps, and communicates monitor status and measured values to the 3500 rack and to recorder outputs for machinery protection. Configuration is performed with 3500 Rack Configuration Software; no field calibration is required.
Product Identification
- Manufacturer: Bently Nevada.
Environmental Ratings
- Temperature: -20°C to 65°C (-22°F to 149°F).
- Temperature: -40°C to 85°C (-40°F to 185°F) Humidity 95%, non-condensing.
Physical & Mechanical
- Dimensions: (height x width x depth) 241.3 mm x 24.4 mm x 241.8 mm (9.5 in x 0.96 in x 9.52 in).
Compliance & Certifications
- Directive: 2014/30/EU.
- Directive: 2014/35/EU.
- RoHS Directive: 2011/65/EU.
Specifications
- Part Number: 184826-01.
- Model: 3500/94M Main Module.
- Condition: New & Original in Factory Packing.
- Factory Warranty: 12 Months.
- Power: consumption 4.6 watts max..
- High-speed: network Monitor status, data and values.
- RS232 port: (I/0) Touch controller data.
- OK LED Indicates proper operation of: the module.
- Indicates communications: between other system modules VGA port (I/O) Analog red, green, blue and sync signals to the display Front Port 24 Vdc Power out, VGA signal out, Touch commands in..
- Ordering Considerations: Firmware, Software, and Hardware.
- Config) Rev 5.6: 3500/02 Software (Op.
- Display) Rev 2.21: 3500/03 Software (Data.
- Acquisition) Rev 1.22: The 3500/94M requires the following hardware: 3500/22 TDI – Transient Data Interface.
Model Comparison
Compare the 3500/94M 184826-01 against the closest Bently Nevada configurations below to confirm ordering options, ratings and physical interchange.
| Model | Part Number | Model | Dimensions | Manufacturer | Condition | Factory Warranty | Power | High-speed |
|---|---|---|---|---|---|---|---|---|
| 3500/94M 184826-01 | 184826-01 | 3500/94M Main Module | (height x width x depth) 241.3 mm x 24.4 mm x 241.8 mm (9.5 in x 0.96 in x 9.52 in) | Bently Nevada | New & Original in Factory Packing | 12 Months | consumption 4.6 watts max. | network Monitor status, data and values |
| 3500/94M 190214-01 | 190214-01 | 3500/94M Normal I/O Module | (height x width x depth) 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in) | Bently Nevada | New & Original in Factory Packing | 12 Months | consumption 4.6 watts max. | network Monitor status, data and values |
| 3500/94M 120M8155-01 | — | — | (height x width x depth) 249 mm x 389 mm x 48 mm 9.8 in x 15.3 in x 1.9 in | Bently Nevada | — | — | — | — |
| 3500/94M 122M3368-01 | 3500/94M 122M3368-01 | 94M face mount for Advantech 10” display | — | Bently Nevada | New & Original in Factory Packing | 12 Months | — | — |
| 3500/94M 190214-02 | 3500/94M 190214-02 | 3500/94M Power-only I/O module for front-mount display | (height x width x depth) 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in) | Bently Nevada | New & Original in Factory Packing | 12 Months | consumption 4.6 watts max. | network Monitor status, data and values |
| 3500/94M 102M8950 | 3500/94M 102M8950 | 3500/94M Advantech 15" Display | (width x height x depth) 422 mm x 338 mm x 68 mm 16.61 in x 13.31 in x 2.68 in | Bently Nevada | New & Original in Factory Packing | 12 Months | — | — |
| 3500/94M 123M3410-01 | 3500/94M 123M3410-01 | Pepperl + Fuchs KVM kit: includes transmitter, receiver, and power supply for the receiver. | — | Bently Nevada | New & Original in Factory Packing | 12 Months | consumption 4.6 watts max. | network Monitor status, data and values |
Frequently asked questions
What is the Bently Nevada 3500/94M 184826-01 and what does it do?
The Bently Nevada 3500/94M 184826-01 is a component for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against user-programmable alarm setpoints within the 3500 rack.
What are the physical dimensions of the 3500/94M 184826-01?
The 3500/94M 184826-01 measures (height x width x depth) 241.3 mm x 24.4 mm x 241.8 mm (9.5 in x 0.96 in x 9.52 in) and weighs It occupies a standard 3500 rack slot and installs on the rack backplane.
What standards does the 3500/94M 184826-01 comply with?
The 3500/94M 184826-01 complies with applicable EU directives and standards including 2014/30/EU, 2011/65/EU. Review the full approvals list in the manufacturer datasheet before deployment.
How is the 3500/94M 184826-01 installed and configured?
The 3500/94M 184826-01 mounts in a 3500 rack rear slot and draws power from the rack backplane. Channels are configured with 3500 Rack Configuration Software; alarm setpoints and full-scale ranges are set in software with no field calibration required.
Related & compatible parts
Bently Nevada · 31000 / 32000 Series
32000-28-10-00-085-03-02
Bently Nevada 32000-28-10-00-085-03-02 Proximity Probe Housing. Probe Penetration: 85mm; Fittings: Two plugs, one M20 fitting.
Bently Nevada · 3500/40M
129525-0025-02
Bently Nevada 129525-0025-02 Transducer Cable. Cable Length: 25 feet (7.6 metres); Assembly: Not assembled.
Bently Nevada · 3500
3500/77-03-00
Bently Nevada 3500/77-03-00 3500 System Module. Pressure I/O: 50 kΩ; Indicates when the: 3500/77M is operating properly.
Bently Nevada
106765-04
Genuine Bently Nevada 106765-04 interconnect cable, 4 metres, new and original in factory packing with a 12-month warranty.
News & guides for Bently Nevada
Bently Nevada AnomAlert: Motor Anomaly Detection Without Sensors
TL;DR: The Bently Nevada AnomAlert is a motor anomaly detector that watches a three-phase motor through its voltage and current…
Bently Nevada 3500/06 Weatherproof Housing: Ratings, Purging and Mounting Limits
TL;DR: The weatherproof enclosure for a Bently Nevada 3500 rack is the 3500/06, not the 3500/01 — 3500/01 is the…
Bently Nevada 3500/91 EGD Gateway: Mark VIe Interface, Slots and Limits
TL;DR: The Bently Nevada 3500/91 is the EGD (Ethernet Global Data) communication gateway for a 3500 rack. It publishes rack,…
Bently Nevada 3500/50M Tachometer Module: Channels, Alarms, Spares
The 3500/50M is a two-channel speed module with no onboard relay contacts and no numeric display. What it measures, how…
Bently Nevada Orbit 60 conneX: Bidirectional DCS Interface
Bently Nevada’s Orbit 60 condition monitoring platform connects to the rest of the plant through conneX—a bidirectional digital interface that…
Bently Nevada 3500 Machinery Protection System: Specifications and Configuration
The Bently Nevada 3500 Machinery Protection System is a rack-based, modular monitoring and protection platform for rotating machines such as…
Bently Nevada 3300 XL Proximity Probe: Materials, Ratings, and Mounting
The Bently Nevada 3300 XL proximity transducer system measures radial vibration, axial position, and phase reference on rotating machinery shafts.…
Bently Nevada 32000 Metric Probe Housing: Construction and Protection Ratings
The Bently Nevada 32000 Metric Proximity Probe Housing is a mounting assembly that secures a 3300 XL proximity probe in…
