Bently Nevada Vibration Monitoring 3500
Bently Nevada 3500/77-03-00
3500 System Module
Bently Nevada 3500/77-03-00 3500 System Module. Pressure I/O: 50 kΩ; Indicates when the: 3500/77M is operating properly.
- Available on request
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
Technical specifications
| Nevada approved positive | voltage 3rd-party pressure transducers (psia) |
|---|---|
| Response | 0 to 5.5 kHz on all configured pressure channels |
| Pressure | Discharge Pressure, Suction Pressure, Maximum Pressure, Minimum Pressure, Compression Ratio, Peak Rod Compression, Peak Rod Tension, Degree of Rod |
| Pressure I/O | 50 kΩ |
| Consumption | 7.8 Watts with transducer supplies at full load. |
| Indicates when the | 3500/77M is operating properly. |
| Indicates when the | 3500/77M is communicating with other modules in the 3500 rack. |
| Indicates when the | 3500/77M is in Bypass |
| The front of each monitor | has one coaxial connector for each channel. Each connector is short-circuit protected. |
| The Buffered Transducer Outputs on | monitors using the Cylinder Pressure |
| I/O module will be inverted and offset | by -2.265 Vdc. |
| Output | Impedance 550 Ω |
| Power Supply | +23.0 ± 0.8 Vdc with 24.5 ma current limiting on each channel. |
| Cylinder Pressure | I/O Module: -30°C to +65°C (-22°F to +150°F) |
| Temperature | -40°C to +85°C (-40°F to +185°F) Humidity 95%, non-condensing |
| Dimensions (Height | x Width x Depth) 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in) |
| Dimensions (Height | x Width x Depth) 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in) |
| Cylinder Pressure Monitor | 3500/77-03-00 A: I/O Module Type 0 3= Cylinder Pressure I/O with Internal Terminations. B: Agency Approval Option 0 0 =None |
Description
The Bently Nevada 3500/77-03-00 is a 3500 system module for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against programmable alarm setpoints inside the 3500 rack. It monitors critical rotating equipment such as turbines, compressors, and pumps, and communicates monitor status and measured values to the 3500 rack and to recorder outputs for machinery protection. Configuration is performed with 3500 Rack Configuration Software; no field calibration is required.
Environmental Ratings
- Temperature: -40°C to +85°C (-40°F to +185°F) Humidity 95%, non-condensing.
Physical & Mechanical
- Dimensions (Height: x Width x Depth) 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in).
- Dimensions (Height: x Width x Depth) 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in).
Specifications
- Nevada approved positive: voltage 3rd-party pressure transducers (psia).
- Response: 0 to 5.5 kHz on all configured pressure channels.
- Pressure: Discharge Pressure, Suction Pressure, Maximum Pressure, Minimum Pressure, Compression Ratio, Peak Rod Compression, Peak Rod Tension, Degree of Rod.
- Pressure I/O: 50 kΩ.
- Consumption: 7.8 Watts with transducer supplies at full load..
- Indicates when the: 3500/77M is operating properly..
- Indicates when the: 3500/77M is communicating with other modules in the 3500 rack..
- Indicates when the: 3500/77M is in Bypass.
- The front of each monitor: has one coaxial connector for each channel. Each connector is short-circuit protected..
- The Buffered Transducer Outputs on: monitors using the Cylinder Pressure.
- I/O module will be inverted and offset: by -2.265 Vdc..
- Output: Impedance 550 Ω.
- Power Supply: +23.0 ± 0.8 Vdc with 24.5 ma current limiting on each channel..
- Cylinder Pressure: I/O Module: -30°C to +65°C (-22°F to +150°F).
- Cylinder Pressure Monitor: 3500/77-03-00 A: I/O Module Type 0 3= Cylinder Pressure I/O with Internal Terminations. B: Agency Approval Option 0 0 =None.
Model Comparison
Compare the 3500/77-03-00 against the closest Bently Nevada configurations below to confirm ordering options, ratings and physical interchange.
| Model | The front of each monitor | Output | Temperature | Indicates when the | Cylinder Pressure | Nevada approved positive | Response | Pressure |
|---|---|---|---|---|---|---|---|---|
| 3500/77-03-00 | has one coaxial connector for each channel. Each connector is short-circuit protected. | Impedance 550 Ω | -40°C to +85°C (-40°F to +185°F) Humidity 95%, non-condensing | 3500/77M is in Bypass | I/O Module: -30°C to +65°C (-22°F to +150°F) | voltage 3rd-party pressure transducers (psia) | 0 to 5.5 kHz on all configured pressure channels | Discharge Pressure, Suction Pressure, Maximum Pressure, Minimum Pressure, Compression Ratio, Peak Rod Compression, Peak Rod Tension, Degree of Rod |
| 3500/77M 176449-07 | — | — | — | — | Discharge Pressure, Suction Pressure, Maximum Pressure, Minimum Pressure, Compression Ratio, Peak Rod Compression, Peak Rod Tension, Degree of Rod Reversal | — | — | — |
| 3500/70-01-00 | has one coaxial connector for each channel. | Impedance 550 Ω typical Protection Each connector is shortcircuit protected. | -40°C to +85°C (-40°F to +185°F) Humidity 95% | 3500/70M Recip Impulse | — | — | — | — |
| 3500/72-01-00 | has one coaxial connector for each channel. | Impedance 510 Ω | -40°C to +85°C (-40°F to +185°F) Humidity 95% | — | — | — | — | — |
| 3500/53-03-00 | — | — | — | — | — | — | — | — |
| 3500/33-01-00 | — | — | — | — | — | — | — | — |
| 3500/42-02-00 | — | — | — | — | — | — | — | — |
Frequently asked questions
What is the Bently Nevada 3500/77-03-00 and what does it do?
The Bently Nevada 3500/77-03-00 is a component for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against user-programmable alarm setpoints within the 3500 rack.
How is the 3500/77-03-00 installed and configured?
The 3500/77-03-00 mounts in a 3500 rack rear slot and draws power from the rack backplane. Channels are configured with 3500 Rack Configuration Software; alarm setpoints and full-scale ranges are set in software with no field calibration required.
Related & compatible parts
Bently Nevada · 3500
3500/61-03-02
Bently Nevada 3500/61-03-02 Temperature Monitors with Recorder Outputs. Power Consumption: 3500/61 Nominal consumption of 9 watts.
Bently Nevada
106765-07
Genuine Bently Nevada 106765-07 interconnect cable, 7 metres, 0.5 kg, sourced as verified surplus or refurbished for faster…
Bently Nevada · 330850 / 330854 Series
330854-080-24-05
Bently Nevada 330854-080-24-05 Sensors & Encoders. Weight is 45 g/m (0.5 oz/ft). Supplied for MRO and OEM replacement…
Bently Nevada
106M7607-01
Genuine surplus Bently Nevada 106M7607-01 power supply, 100/240AC to 24DC/2.5A, ATEX rated, verified and ready to ship from…
News & guides for Bently Nevada
Bently Nevada AnomAlert: Motor Anomaly Detection Without Sensors
TL;DR: The Bently Nevada AnomAlert is a motor anomaly detector that watches a three-phase motor through its voltage and current…
Bently Nevada 3500/06 Weatherproof Housing: Ratings, Purging and Mounting Limits
TL;DR: The weatherproof enclosure for a Bently Nevada 3500 rack is the 3500/06, not the 3500/01 — 3500/01 is the…
Bently Nevada 3500/91 EGD Gateway: Mark VIe Interface, Slots and Limits
TL;DR: The Bently Nevada 3500/91 is the EGD (Ethernet Global Data) communication gateway for a 3500 rack. It publishes rack,…
Bently Nevada 3500/50M Tachometer Module: Channels, Alarms, Spares
The 3500/50M is a two-channel speed module with no onboard relay contacts and no numeric display. What it measures, how…
Bently Nevada Orbit 60 conneX: Bidirectional DCS Interface
Bently Nevada’s Orbit 60 condition monitoring platform connects to the rest of the plant through conneX—a bidirectional digital interface that…
Bently Nevada 3500 Machinery Protection System: Specifications and Configuration
The Bently Nevada 3500 Machinery Protection System is a rack-based, modular monitoring and protection platform for rotating machines such as…
Bently Nevada 3300 XL Proximity Probe: Materials, Ratings, and Mounting
The Bently Nevada 3300 XL proximity transducer system measures radial vibration, axial position, and phase reference on rotating machinery shafts.…
Bently Nevada 32000 Metric Probe Housing: Construction and Protection Ratings
The Bently Nevada 32000 Metric Proximity Probe Housing is a mounting assembly that secures a 3300 XL proximity probe in…
