Bently Nevada Vibration Monitoring 3500

Bently Nevada 3500/33-01-01

3500/33 16-Channel Relay Module

Manufacturer: Bently Nevada Part Number: 3500/33-01-01

Bently Nevada 3500/33-01-01 3500/33 16-Channel Relay Module. Power Consumption: 5.8 watts typical; Relay Contact Life: 10,000 cycles.

  • Available on request
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

Technical specifications

Manufacturer Bently Nevada
Product No. 3500/33-01-01
Product type 3500/33 16-Channel Relay Module
Power Consumption 5.8 watts typical
OK LED Illuminated when the 3500/33 16-Channel Relay Module is operating properly.
TX/RX LED Transmit and receive flashes when the 3500/3316-Channel Relay Module is communicating with other modules in the 3500 rack.
CH Alarm LED Illuminated when Relay channel is in an alarm state.
Relay Type Single-pole Double-throw (SPDT)
Relay Environmental Sealing Epoxy-sealed
Relay Arc Suppressor 250 Vrms Installed as standard
Relay Contact Life 10,000 cycles
Relay Operation Four groups of four channels are switch selectable for Normally De-energized (ND) or Normally Energized (NE) operation.
Dimensions (height x widthx depth) 241 mm x 24.4 mm x 242 mm (9.50 in x 0.96 in x 9.52 in)
Dimensions (height x widthx depth) 241 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in)
Min Switched Current 100 mA @ 5 Vdc
Max Switched Current 5 A Max Switched Power: 70 W @ 24 Vdc 10 W @ 48 Vdc 9 W @ 60 Vdc
Max Switched Voltage 125 Vdc
Max Switched Current 5 A
Max Switched Power 1200 VA
Max Switched Voltage 250 Vac
Max Switched Voltage 30 Vdc
Min Switched Current 1 mA @ 1 Vdc
Max Switched Current 100 mA @ 48 Vdc Specific to AC up to 120VAC: l The Minimum switching current for Gold plated is 1m A l The maximum switching current before damaging the Gold relays is 5m A

Description

The Bently Nevada 3500/33-01-01 is a 3500/33 16-channel relay module for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against programmable alarm setpoints inside the 3500 rack. and has a nominal power consumption of 5.8 watts typical Dimensions are (height x widthx depth) 241 mm x 24.4 mm x 242 mm (9.50 in x 0.96 in x 9.52 in) It monitors critical rotating equipment such as turbines, compressors, and pumps, and communicates monitor status and measured values to the 3500 rack and to recorder outputs for machinery protection. Configuration is performed with 3500 Rack Configuration Software; no field calibration is required.

Product Identification

  • Manufacturer: Bently Nevada.
  • Product No.: 3500/33-01-01.
  • Product type: 3500/33 16-Channel Relay Module.

Electrical & Signal

  • Power Consumption: 5.8 watts typical.
  • CH Alarm LED: Illuminated when Relay channel is in an alarm state..

Physical & Mechanical

  • Dimensions: (height x widthx depth) 241 mm x 24.4 mm x 242 mm (9.50 in x 0.96 in x 9.52 in).
  • Dimensions: (height x widthx depth) 241 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in).

Specifications

  • OK LED: Illuminated when the 3500/33 16-Channel Relay Module is operating properly..
  • TX/RX LED: Transmit and receive flashes when the 3500/3316-Channel Relay Module is communicating with other modules in the 3500 rack..
  • Relay Type: Single-pole Double-throw (SPDT).
  • Relay Environmental Sealing: Epoxy-sealed.
  • Relay Arc Suppressor: 250 Vrms Installed as standard.
  • Relay Contact Life: 10,000 cycles.
  • Relay Operation: Four groups of four channels are switch selectable for Normally De-energized (ND) or Normally Energized (NE) operation..
  • Min Switched Current: 100 mA @ 5 Vdc.
  • Max Switched Current: 5 A Max Switched Power: 70 W @ 24 Vdc 10 W @ 48 Vdc 9 W @ 60 Vdc.
  • Max Switched Voltage: 125 Vdc.
  • Max Switched Current: 5 A.
  • Max Switched Power: 1200 VA.
  • Max Switched Voltage: 250 Vac.
  • Max Switched Voltage: 30 Vdc.
  • Min Switched Current: 1 mA @ 1 Vdc.
  • Max Switched Current: 100 mA @ 48 Vdc Specific to AC up to 120VAC: l The Minimum switching current for Gold plated is 1m A l The maximum switching current before damaging the Gold relays is 5m A.

Model Comparison

Compare the 3500/33-01-01 against the closest Bently Nevada configurations below to confirm ordering options, ratings and physical interchange.

Model Product No. Product type OK LED TX/RX LED Dimensions Power Consumption Relay Type Max Switched Voltage
3500/33-01-01 3500/33-01-01 3500/33 16-Channel Relay Module Illuminated when the 3500/33 16-Channel Relay Module is operating properly. Transmit and receive flashes when the 3500/3316-Channel Relay Module is communicating with other modules in the 3500 rack. (height x widthx depth) 241 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in) 5.8 watts typical Single-pole Double-throw (SPDT) 30 Vdc
3500/33-01-00 3500/33-01-00 16-Channel relay module Illuminated when the 3500/33 16-Channel Relay Module is operating properly. Transmit and receive flashes when the 3500/3316-Channel Relay Module is communicating with other modules in the 3500 rack. — 5.8 watts typical Single-pole 30 Vdc l Minimum switched load for standard (silver) contacts is 100 mA @ 5 Vdc. l Minimum switched load for Low Current (gold-plated) contacts is 1 mA @ 1 Vdc.
3500/33-01-00 149992-01 3500/33-01-00 149992-01 3500/33 16-Channel Relay Module — — (height x width x depth) 241 mm x 24.4 mm x 242 mm (9.50 in x 0.96 in x 9.52 in) — — —
3500/61-01-01 3500/61-01-01 Temperature Monitors with Recorder Outputs Indicates when the Temperature Monitor is operating properly. Indicates then the Temperature Monitor is communicating with other modules in the 3500 rack. — 3500/60 Nominal consumption of 7 watts. 3500/61 Nominal consumption of 9 watts. — —
3500/42-01-02 3500/42-01-02 3500/42m Proximitor Seismic Monitor Indicates when the 3500/42M Proximitor Seismic Monitor is operating properly. Indicates when the 3500/42M Proximitor Seismic Monitor is communicating with other modules in the 3500 rack. (Height x Widthx Depth) 241.3 mm x 24.4 mm x 163.1mm (9.50 in x 0.96 in x 6.42 in) — — —
3500/42-02-01 3500/42-02-01 — Indicates when the 3500/42M Proximitor Seismic Monitor is operating properly. Indicates when the 3500/42M Proximitor Seismic Monitor is communicating with other modules in the 3500 rack. — — — —
3500/42-06-01 3500/42-06-01 Proximitor Seismic Monitor Indicates when the 3500/42M Proximitor Seismic Monitor is operating properly. Indicates when the 3500/42M Proximitor Seismic Monitor is communicating with other modules in the 3500 rack. (Height x Widthx Depth) 241.3 mm x 24.4 mm x 241.8mm (9.50 in x 0.96 in x 9.52 in) — — —

Frequently asked questions

What is the Bently Nevada 3500/33-01-01 and what does it do?

The Bently Nevada 3500/33-01-01 is a 3500/33 16-channel relay module for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against user-programmable alarm setpoints within the 3500 rack.

What is the power consumption of the 3500/33-01-01?

The 3500/33-01-01 has a nominal power consumption of 5.8 watts typical It draws power from the 3500 rack backplane and requires no separate supply.

What are the physical dimensions of the 3500/33-01-01?

The 3500/33-01-01 measures (height x widthx depth) 241 mm x 24.4 mm x 242 mm (9.50 in x 0.96 in x 9.52 in) and weighs It occupies a standard 3500 rack slot and installs on the rack backplane.

How is the 3500/33-01-01 installed and configured?

The 3500/33-01-01 mounts in a 3500 rack rear slot and draws power from the rack backplane. Channels are configured with 3500 Rack Configuration Software; alarm setpoints and full-scale ranges are set in software with no field calibration required.

Related & compatible parts

Bently Nevada · 3500/40M

3500/40M-01-01

Bently Nevada 3500/40M-01-01 Proximitor Monitor. Hazardous Area Approval: 01 — cNRTLus (Class I, Division 2); Category: Monitor order…

Available on request

Bently Nevada · 31000 / 32000 Series

31000-30-05-15-049-03-02

Bently Nevada 31000-30-05-15-049-03-02 Proximity Probe Housing. Standoff Adapter: Minimum length 1.5 in (38 mm); O-Ring Material: Neoprene®.

Available on request

Bently Nevada · 31000 / 32000 Series

31000-16-05-00-037-03-02

Bently Nevada 31000-16-05-00-037-03-02 Proximity Probe Housing. Probe Cable Length: 0.5 m (20 in); O-Ring Material: Neoprene®.

Available on request

Bently Nevada · 3500/40M

00502133

Bently Nevada 00502133 Connector Header. Style: Euro style, 12-pin. Supplied for MRO and OEM replacement use.

Available on request

News & guides for Bently Nevada

View all articles

Request a quote for this part

Part number: 3500/33-01-01

We reply within one business day.

3500/33-01-01 Quote reply within 1 business day