Bently Nevada Vibration Monitoring 3500
Bently Nevada 3500/50M-01-00 286566-02
Tachometer Module
Bently Nevada 3500/50M-01-00 286566-02 Tachometer Module. Input signal: range +10.0 V to -24.0 V; Power: consumption 5.8 Watts, typical.
- Available on request
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
Technical specifications
| Manufacturer | Bently Nevada |
|---|---|
| Product No. | 3500/50M-01-00 286566-02 |
| Product type | Tachometer Module |
| I/O module type | 01 = I/O module with internal terminations |
| Agency approval option | 00 = None |
| Module accepts up to two | transducer signals from proximity probe transducers or magnetic pickups. |
| Input signal | range +10.0 V to -24.0 V |
| Signals exceeding this range | are limited internally by the module. |
| Input | impedance 20 k Ω (standard) 40 k Ω (TMR) 7.15 k Ω (Internal Barrier) |
| Power | consumption 5.8 Watts, typical |
| Accepts 1 to 2 proximity | transducer signals |
| Restrictions may apply to | magnetic pickups (see on page 2). |
| Tachometer Module is | operating properly. |
| Tachometer Module is | communicating with other modules in the 3500 rack. |
| The front of each module has | one coaxial connector for each channel. |
| Each connector is short circuit | and ESD protected. |
| Buffered outputs are available | at the I/O module via Euro style connectors. |
| Output | Impedance 550 Ω |
| Power Supply | 24 Vdc, 40 mA maximum per channel |
| Recorder | +4 to +20 mA |
| Values are proportional to | module full-scale range (rpm or rpm/min). |
| Individual recorder values are | provided for each channel. |
| Monitor operation is | unaffected by short circuits on recorder outputs. |
| Compliance | (current output) 0 to +12 Vdc range across load Load resistance is 0 to 600 Ω |
| Resolution | 0.3662 µA per bit ±0.25% error at room temperature ±0.7% error over temperature range |
| Update rate approximately | 100 ms |
| Signal Conditioning | Specified at +25ºC (+77ºF) |
| Module supports 1 to 255 | events per revolution for |
| All other channel types | support 0.0039 to 255 events per revolution. |
| All channel types support a | maximum full scale range of 99,999 rpm and a maximum input frequency of 20 kHz. |
| Minimum input frequency for | proximity transducers is 0.0167 Hz (1 rpm for 1 event per revolution). |
| Minimum input frequency for | passive magnetic pickups is 3.3 Hz. |
| RPM Accuracy | Less than 100 rpm = ± 0.1 rpm 100 to 10,000 rpm = ±1 rpm 10,000 to 99,999 rpm = ± 0.01% of true shaft speed |
| Accuracy | ± 20 rpm/min |
| Use for any input above | 0.0167 Hz (1 rpm for 1 event/revolution) |
| Minimum signal amplitude | for triggering is 1 volt peakto-peak. |
| Threshold | User selectable from +9.5 |
| Minimum signal amplitude | for triggering is 500 millivolts peak-to-peak |
| Hysteresis User selectable from 0.2 to | 2.5 volts |
| Alarm 1 levels (setpoints) | can be set for each value measured by the |
| Alarm 2 setpoints can be set | for any two of the values measured by the |
| Alarm setpoints are set using | software configuration. |
| Alarms are adjustable and | can normally be set from 0 to 100% of full scale for each measured value. |
| Programmable alarm delays | for Alarm 1 and Alarm 2 |
| From 1 to 60 seconds in 1 | second intervals |
| From 1 to 60 seconds in 0.1 | second intervals |
| Dimensions | (Height x Width x |
| Depth) | 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in) |
| Ordering Considerations | To add the 3500/50M Tachometer Module to an existing 3500 Monitoring System, you must have the following versions of firmware and software: |
| Firmware and Software Version | 3500/22M Module |
| Firmware Revision (1.70) | 3500/01 Configuration |
| Version 4.20 or | later 3500/02 Data Acquisition |
| Version 2.52 or | later 3500/03 Display Software Version 1.52 or later 3500/50M Firmware Revision 5.30 or later 3500/50M |
| Not compatible | with any version of 3500/20 |
Description
The Bently Nevada 3500/50M-01-00 286566-02 is a tachometer module for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against programmable alarm setpoints inside the 3500 rack. Dimensions are (height x width x It monitors critical rotating equipment such as turbines, compressors, and pumps, and communicates monitor status and measured values to the 3500 rack and to recorder outputs for machinery protection. Configuration is performed with 3500 Rack Configuration Software; no field calibration is required.
Product Identification
- Manufacturer: Bently Nevada.
- Product No.: 3500/50M-01-00 286566-02.
- Product type: Tachometer Module.
Ordering & Configuration
- I/O module type: 01 = I/O module with internal terminations.
- Agency approval option: 00 = None.
Electrical & Signal
- Recorder: +4 to +20 mA.
- Individual recorder values are: provided for each channel..
- Resolution: 0.3662 µA per bit ±0.25% error at room temperature ±0.7% error over temperature range.
- Signal Conditioning: Specified at +25ºC (+77ºF).
- RPM Accuracy: Less than 100 rpm = ± 0.1 rpm 100 to 10,000 rpm = ±1 rpm 10,000 to 99,999 rpm = ± 0.01% of true shaft speed.
- Accuracy: ± 20 rpm/min.
- Alarm 1 levels (setpoints): can be set for each value measured by the.
- Alarm 2 setpoints can be set: for any two of the values measured by the.
- Alarm setpoints are set using: software configuration..
- Alarms are adjustable and: can normally be set from 0 to 100% of full scale for each measured value..
- Programmable alarm delays: for Alarm 1 and Alarm 2.
Physical & Mechanical
- Dimensions: (Height x Width x.
Specifications
- Module accepts up to two: transducer signals from proximity probe transducers or magnetic pickups..
- Input signal: range +10.0 V to -24.0 V.
- Signals exceeding this range: are limited internally by the module..
- Input: impedance 20 k Ω (standard) 40 k Ω (TMR) 7.15 k Ω (Internal Barrier).
- Power: consumption 5.8 Watts, typical.
- Accepts 1 to 2 proximity: transducer signals.
- Restrictions may apply to: magnetic pickups (see on page 2)..
- Tachometer Module is: operating properly..
- Tachometer Module is: communicating with other modules in the 3500 rack..
- The front of each module has: one coaxial connector for each channel..
- Each connector is short circuit: and ESD protected..
- Buffered outputs are available: at the I/O module via Euro style connectors..
- Output: Impedance 550 Ω.
- Power Supply: 24 Vdc, 40 mA maximum per channel.
- Values are proportional to: module full-scale range (rpm or rpm/min)..
- Monitor operation is: unaffected by short circuits on recorder outputs..
- Compliance: (current output) 0 to +12 Vdc range across load Load resistance is 0 to 600 Ω.
- Update rate approximately: 100 ms.
- Module supports 1 to 255: events per revolution for.
- All other channel types: support 0.0039 to 255 events per revolution..
- All channel types support a: maximum full scale range of 99,999 rpm and a maximum input frequency of 20 kHz..
- Minimum input frequency for: proximity transducers is 0.0167 Hz (1 rpm for 1 event per revolution)..
- Minimum input frequency for: passive magnetic pickups is 3.3 Hz..
- Use for any input above: 0.0167 Hz (1 rpm for 1 event/revolution).
- Minimum signal amplitude: for triggering is 1 volt peakto-peak..
- Threshold: User selectable from +9.5.
- Minimum signal amplitude: for triggering is 500 millivolts peak-to-peak.
- Hysteresis User selectable from 0.2 to: 2.5 volts.
- From 1 to 60 seconds in 1: second intervals.
- From 1 to 60 seconds in 0.1: second intervals.
- Depth): 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in).
- Ordering Considerations: To add the 3500/50M Tachometer Module to an existing 3500 Monitoring System, you must have the following versions of firmware and software:.
- Firmware and Software Version: 3500/22M Module.
- Firmware Revision (1.70): 3500/01 Configuration.
- Version 4.20 or: later 3500/02 Data Acquisition.
- Version 2.52 or: later 3500/03 Display Software Version 1.52 or later 3500/50M Firmware Revision 5.30 or later 3500/50M.
- Not compatible: with any version of 3500/20.
Model Comparison
Compare the 3500/50M-01-00 286566-02 against the closest Bently Nevada configurations below to confirm ordering options, ratings and physical interchange.
| Model | Product No. | Dimensions | Product type | Depth) | Power | Output | Recorder | Compliance |
|---|---|---|---|---|---|---|---|---|
| 3500/50M-01-00 286566-02 | 3500/50M-01-00 286566-02 | (Height x Width x | Tachometer Module | 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in) | consumption 5.8 Watts, typical | Impedance 550 Ω | +4 to +20 mA | (current output) 0 to +12 Vdc range across load Load resistance is 0 to 600 Ω |
| 3500/50M-01-01 | 3500/50M-01-01 | (Height x Width x | Tachometer Module | 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) | — | — | — | — |
| 3500/53-02-00 | 3500/53-02-00 | (Height x Width x Depth): 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in). Weight: 0.45 kg (1.0 lb.). | 3500/53 Electronic Overspeed Detection System | — | — | Impedance: 550 Ω. | — | (current output): 0 to +12 Vdc range across load. Load resistance is 0 to 600 Ω. Resolution: 0.3662 µA per bit ±0.25% error at room temperature ±0.7% error over temperature range. Update rate approximately 100 ms. |
| 3500/53-03-00 | 3500/53-03-00 | (Height x Widthx Depth): 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in). Weight: 0.45 kg (1.0 lb.). | 3500/53 Electronic Overspeed Detection System | — | — | — | +4 to +20 mA. Values are proportional to module full-scale range (rpm). Module operation is unaffected by short circuits on recorder output. | — |
| 3500/65-01-00 145988-02 | 3500/65-01-00 145988-02 | (Height x | — | 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in) | — | — | — | — |
| 3500/92-04-01-00 136188-02 | 3500/92-04-01-00 136188-02 | (Height x Width x | Ethernet/RS485 Modbus I/O Module | 241 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in) | — | — | — | — |
| 3500/33-01-00 149992-01 | 3500/33-01-00 149992-01 | (height x width x depth) 241 mm x 24.4 mm x 242 mm (9.50 in x 0.96 in x 9.52 in) | 3500/33 16-Channel Relay Module | — | 70 W @ 24 Vdc 10 W @ 48 Vdc 9 W @ 60 Vdc | — | — | — |
Frequently asked questions
What is the Bently Nevada 3500/50M-01-00 286566-02 and what does it do?
The Bently Nevada 3500/50M-01-00 286566-02 is a tachometer module for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against user-programmable alarm setpoints within the 3500 rack.
What are the physical dimensions of the 3500/50M-01-00 286566-02?
The 3500/50M-01-00 286566-02 measures (Height x Width x and weighs It occupies a standard 3500 rack slot and installs on the rack backplane.
How is the 3500/50M-01-00 286566-02 installed and configured?
The 3500/50M-01-00 286566-02 mounts in a 3500 rack rear slot and draws power from the rack backplane. Channels are configured with 3500 Rack Configuration Software; alarm setpoints and full-scale ranges are set in software with no field calibration required.
Related & compatible parts
Bently Nevada
107770-03-02
Genuine Bently Nevada 107770-03-02 velocity transducer housing, CENELEC approved with 1/2-14 NPT explosion-proof cable exit. Verified surplus and…
Bently Nevada · 31000 / 32000 Series
31000-28-05-15-026-06-02
Bently Nevada 31000-28-05-15-026-06-02 Proximity Probe Housing. Probe Cable Length: 0.5 m (20 in); O-Ring Material: Neoprene®.
Bently Nevada
3500/15-05-05 106M1081-01
Bently Nevada 3500/15-05-05 106M1081-01 AC and DC Power Supply Module. Input Frequency: 47 to 63 Hz. Weight is…
Bently Nevada
BA42608-14-02
Bently Nevada BA42608-14-02 Sensors & Encoders. Mounting Thread and Cap: 1/2-in 14 BSP (G 1/2-in) with tall cap.
News & guides for Bently Nevada
Bently Nevada AnomAlert: Motor Anomaly Detection Without Sensors
TL;DR: The Bently Nevada AnomAlert is a motor anomaly detector that watches a three-phase motor through its voltage and current…
Bently Nevada 3500/06 Weatherproof Housing: Ratings, Purging and Mounting Limits
TL;DR: The weatherproof enclosure for a Bently Nevada 3500 rack is the 3500/06, not the 3500/01 — 3500/01 is the…
Bently Nevada 3500/91 EGD Gateway: Mark VIe Interface, Slots and Limits
TL;DR: The Bently Nevada 3500/91 is the EGD (Ethernet Global Data) communication gateway for a 3500 rack. It publishes rack,…
Bently Nevada 3500/50M Tachometer Module: Channels, Alarms, Spares
The 3500/50M is a two-channel speed module with no onboard relay contacts and no numeric display. What it measures, how…
Bently Nevada Orbit 60 conneX: Bidirectional DCS Interface
Bently Nevada’s Orbit 60 condition monitoring platform connects to the rest of the plant through conneX—a bidirectional digital interface that…
Bently Nevada 3500 Machinery Protection System: Specifications and Configuration
The Bently Nevada 3500 Machinery Protection System is a rack-based, modular monitoring and protection platform for rotating machines such as…
Bently Nevada 3300 XL Proximity Probe: Materials, Ratings, and Mounting
The Bently Nevada 3300 XL proximity transducer system measures radial vibration, axial position, and phase reference on rotating machinery shafts.…
Bently Nevada 32000 Metric Probe Housing: Construction and Protection Ratings
The Bently Nevada 32000 Metric Proximity Probe Housing is a mounting assembly that secures a 3300 XL proximity probe in…
