Bently Nevada Vibration Monitoring 3500

Bently Nevada 3500/50M-01-01

Tachometer Module

Manufacturer: Bently Nevada Part Number: 3500/50M-01-01

Bently Nevada 3500/50M-01-01 Tachometer Module. Power consumption: 5.8 watts, typical; Agency Approval: cNRTLus (Class 1, Division 2).

  • Available on request
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

Technical specifications

Manufacturer Bently Nevada
Product No. 3500/50M-01-01
Product type Tachometer Module
Power consumption 5.8 watts, typical
Transducer Power Supply 24 Vdc, 40 mA maximum per channel
Ordering Information 3500/50M-01-01 3500/50M Tachometer Module
I/O module type 01 = I/O module with internal terminations
Agency Approval Option 01= cNRTLus (Class 1, Division 2)
Ordering Considerations To add the 3500/50M Tachometer Module to an existing 3500 Monitoring System, you must have the following versions of firmware and software:
Module accepts up to two transducer signals from proximity probe transducers or magnetic pickups.
Input signal range +10.0 V to -24.0 V
Signals exceeding this range are limited internally by the module.
Input impedance 20 k Ω (standard) 40 k Ω (TMR) 7.15 k Ω (Internal Barrier) Power consumption; 5.8 Watts, typical
OK LED Indicates when the 3500/50M Tachometer Module is operating properly.
TX/RX LED Indicates when the Tachometer Module is communicating with other modules in the 3500 rack.
Bypass LED Indicates when the Tachometer Module is in Bypass Mode.
Speed Input The 3500/50M Tachometer Module supports 1 to 255 events per revolution for
All other channel types support 0.0039 to 255 events per revolution.
All channel types support a maximum full scale range of 99,999 rpm and a maximum input frequency of 20 kHz.
Minimum input frequency for proximity transducers is 0.0167 Hz (1 rpm for 1 event per revolution).
Minimum input frequency for passive magnetic pickups is 3.3 Hz.
RPM Accuracy Less than 100 rpm = ± 0.1 rpm 100 to 10,000 rpm = ±1 rpm 10,000 to 99,999 rpm = ± 0.01% of true shaft speed
Accuracy ± 20 rpm/min
Dimensions (Height x Width x
Depth) 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in)
Depth) 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in)
Depth) 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in)

Description

The Bently Nevada 3500/50M-01-01 is a tachometer module for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against programmable alarm setpoints inside the 3500 rack. Dimensions are (height x width x It monitors critical rotating equipment such as turbines, compressors, and pumps, and communicates monitor status and measured values to the 3500 rack and to recorder outputs for machinery protection. Configuration is performed with 3500 Rack Configuration Software; no field calibration is required.

Product Identification

  • Manufacturer: Bently Nevada.
  • Product No.: 3500/50M-01-01.
  • Product type: Tachometer Module.

Ordering & Configuration

  • I/O module type: 01 = I/O module with internal terminations.
  • Agency Approval Option: 01= cNRTLus (Class 1, Division 2).

Electrical & Signal

  • Power consumption: 5.8 watts, typical.
  • Input impedance: 20 k Ω (standard) 40 k Ω (TMR) 7.15 k Ω (Internal Barrier) Power consumption; 5.8 Watts, typical.
  • RPM Accuracy: Less than 100 rpm = ± 0.1 rpm 100 to 10,000 rpm = ±1 rpm 10,000 to 99,999 rpm = ± 0.01% of true shaft speed.
  • Accuracy: ± 20 rpm/min.

Physical & Mechanical

  • Dimensions: (Height x Width x.

Specifications

  • Transducer Power Supply: 24 Vdc, 40 mA maximum per channel.
  • Ordering Information: 3500/50M-01-01 3500/50M Tachometer Module.
  • Ordering Considerations: To add the 3500/50M Tachometer Module to an existing 3500 Monitoring System, you must have the following versions of firmware and software:.
  • Module accepts up to two: transducer signals from proximity probe transducers or magnetic pickups..
  • Input signal range: +10.0 V to -24.0 V.
  • Signals exceeding this range: are limited internally by the module..
  • OK LED: Indicates when the 3500/50M Tachometer Module is operating properly..
  • TX/RX LED: Indicates when the Tachometer Module is communicating with other modules in the 3500 rack..
  • Bypass LED: Indicates when the Tachometer Module is in Bypass Mode..
  • Speed Input: The 3500/50M Tachometer Module supports 1 to 255 events per revolution for.
  • All other channel types: support 0.0039 to 255 events per revolution..
  • All channel types support a: maximum full scale range of 99,999 rpm and a maximum input frequency of 20 kHz..
  • Minimum input frequency for: proximity transducers is 0.0167 Hz (1 rpm for 1 event per revolution)..
  • Minimum input frequency for: passive magnetic pickups is 3.3 Hz..
  • Depth): 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in).
  • Depth): 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in).
  • Depth): 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in).

Model Comparison

Compare the 3500/50M-01-01 against the closest Bently Nevada configurations below to confirm ordering options, ratings and physical interchange.

Model Product No. Product type Dimensions OK LED TX/RX LED Transducer Power Supply Ordering Information Agency Approval Option
3500/50M-01-01 3500/50M-01-01 Tachometer Module (Height x Width x Indicates when the 3500/50M Tachometer Module is operating properly. Indicates when the Tachometer Module is communicating with other modules in the 3500 rack. 24 Vdc, 40 mA maximum per channel 3500/50M-01-01 3500/50M Tachometer Module 01= cNRTLus (Class 1, Division 2)
3500/50M-01-00 286566-02 3500/50M-01-00 286566-02 Tachometer Module (Height x Width x — — — — —
3500/53-02-00 3500/53-02-00 3500/53 Electronic Overspeed Detection System (Height x Width x Depth): 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in). Weight: 0.45 kg (1.0 lb.). — — — 3500/53-02-00 00 = None
3500/53-03-00 3500/53-03-00 3500/53 Electronic Overspeed Detection System (Height x Widthx Depth): 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in). Weight: 0.45 kg (1.0 lb.). Indicates when the 3500/53 Module is operating properly. — -24 Vdc, 40 mA maximum. 3500/53-AXX-BXX A: Channel Option : 03 = Three Channel System —
3500/33-01-01 3500/33-01-01 3500/33 16-Channel Relay Module (height x widthx depth) 241 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in) Illuminated when the 3500/33 16-Channel Relay Module is operating properly. Transmit and receive flashes when the 3500/3316-Channel Relay Module is communicating with other modules in the 3500 rack. — — —
3500/42M-01-00 3500/42M-01-00 Proximitor Seismic Monitor (Height x Widthx Depth) 241.3 mm x 24.4 mm x 241.8mm (9.50 in x 0.96 in x 9.52 in) Indicates when the 3500/42M Proximitor Seismic Monitor is operating properly. Indicates when the 3500/42M Proximitor Seismic Monitor is communicating with other modules in the 3500 rack. -24 Vdc — —
3500/61-01-01 3500/61-01-01 Temperature Monitors with Recorder Outputs — Indicates when the Temperature Monitor is operating properly. Indicates then the Temperature Monitor is communicating with other modules in the 3500 rack. — — 0 1= CSA/NRTL/C (Class 1, Div 2)

Frequently asked questions

What is the Bently Nevada 3500/50M-01-01 and what does it do?

The Bently Nevada 3500/50M-01-01 is a tachometer module for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against user-programmable alarm setpoints within the 3500 rack.

What are the physical dimensions of the 3500/50M-01-01?

The 3500/50M-01-01 measures (Height x Width x and weighs It occupies a standard 3500 rack slot and installs on the rack backplane.

How is the 3500/50M-01-01 installed and configured?

The 3500/50M-01-01 mounts in a 3500 rack rear slot and draws power from the rack backplane. Channels are configured with 3500 Rack Configuration Software; alarm setpoints and full-scale ranges are set in software with no field calibration required.

Related & compatible parts

Bently Nevada

105M6193-03

Genuine surplus Bently Nevada 105M6193-03 stainless steel housing for 2300 series, verified for hazardous-area use and ready to…

In Stock

Bently Nevada · 3500/40M

132234-01

Bently Nevada 132234-01 External Termination Block. Connector Type: Terminal strip connectors. Supplied for MRO and OEM replacement use.

Available on request

Bently Nevada · 3500

3500/94M-02-00-01

Bently Nevada 3500/94M-02-00-01 3500 System Module. Physical Characteristics: 3500/94M VGA Display Module; Industrial: hardened.

Available on request

Bently Nevada · 330901 / 330902 / 330908 Series

330901-02-24-10-01-00

Bently Nevada 330901-02-24-10-01-00 Proximity Probes & Sensors. Probe Length: 1.0 m; Total Length: 1.0 meter (39 in).

Available on request

News & guides for Bently Nevada

View all articles

Request a quote for this part

Part number: 3500/50M-01-01

We reply within one business day.

3500/50M-01-01 Quote reply within 1 business day