Bently Nevada Vibration Monitoring 3500

Bently Nevada 3500/61 133819-02

3500/61 RTD/TC Non-Isolated I/O

Manufacturer: Bently Nevada Part Number: 3500/61 133819-02

Bently Nevada 3500/61 133819-02 3500/61 RTD/TC Non-Isolated I/O. Impedance: 10 MΩ for each lead input; RTDs: 100Ω 3-wire & 4-wire platinum.

  • Available on request
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

Technical specifications

Manufacturer Bently Nevada
Product No. 133819-02
Product type 3500/61 RTD/TC Non-Isolated I/O
Signal Accepts from 1 to 6 RTD or TC transducer signals.
Impedance 10 MΩ for each lead input.
Power Consumption 3500/61 Nominal consumption of 9 watts.
TCs Type E -100 °C to +1000 °C, (-148 °F to +1832 °F).
When using any of the isolated thermocouple I/O modules (-03 or -04
RTDs 100Ω 3-wire & 4-wire platinum
RTD (alpha = 0.00385) -200° C to +850° C (-328 °F to +1562 °F). With external barriers: -50 °C to +850 °C (-122 °F to +1562 °F). 100Ω 3-wire & 4-wire platinum
Platinum RTD's with 0.00385 alphas are the worldwide industrial standard and are recommended for all applications
System Isolation 500Vdc Channel to Channel Isolation: 250 Vdc
Isolation is only required for fault scenarios and these voltages will not be present on the I/O module inputs when a wiring or field fault occurs.
Temperature Monitor is operating properly.
Monitor is communicating with other modules in the 3500 rack.
RTD Current Source Value 925 ±15 µA @ 25° C per transducer (single supply for the 4-wire RTD and two supplies for the 3-wire).
Recorder +4 to +20 mA. Values are proportional to monitor full-scale. Individual recorder values are provided for each channel. Monitor operation is unaffected by short circuits on recorder outputs.
Voltage Compliance (current output) 0 to +12 Vdc range across load. Load resistance is 0 to 600 Ω.
Resolution 0.3662 µA per bit ±0.15% error at room temperature ±0.4% error over temperature range.
Signal Conditioning Specified at +25 °C (+77 °F) unless otherwise noted.
Full-scale range for each channel is set in the field via 3500 Configuration Software. No calibration is required. RTDs and TCs (except for 10Ω Copper RTDs) Resolution 1 °C or 1 °F
Rack ±3 °C at 25 °C (±5.4 °F at 77 °F).
Rack ±1 °C at 25 °C (±1.8 °F at 77 °F).
Rack ±2 °C at 25 °C (±3.6 °F at 77 °F). ±3 °C at 25 °C ±5.4 °F at 77 °F).
Rack ±3 °C at 25 °C ±5.4 °F at 77 °F).
Rack °C at 25 °C (±1.8 °F at 77 °F) 10 Ω Copper RTDs Resolution 1°C or 1 °F Accuracy ±3 °C at 25 °C
Monitors have both under and over alarm setpoints.
The user can program alarm delays using software as follows:
Alert From 1 to 60 seconds in 1 second intervals.
Danger From 1 to 60 seconds in 0.5 second intervals
Temprature -30°C to +65°C (-22°F to +150 °F) when used with
I/O Modules 0°C to +65 °C (32 °F to +150 °F) when used with Internal Barrier
Temperature -40°C to +85°C (-40°F to +185°F)
Dimensions (Height x Width x
Depth) 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in)
Depth) 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in)
Certifications (Approvals pending)
FCC Rules. Operation is subject to the following two conditions: l This device may not cause harmful interference. l This device must accept any interference received, including interference that may cause undesired operation.
EMC European Community Directive:
EMC Directive 2014/30/EU Standards: EN 61000-6-2; Immunity for
Industrial Environments EN 61000-6-4; Emissions for
Electrical Safety European Community Directive:
LV Directive 2014/35/EU Standards:
RoHS European Community Directive:
Maritime DNV GL rules for classification – Ships, offshore units, and high speed and light craft ABS Rules for Condition of Classification,
Part 1 l Steel Vessels Rules l Offshore Units and Structures

Description

The Bently Nevada 3500/61 133819-02 is a 3500/61 rtd/tc non-isolated i/o for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against programmable alarm setpoints inside the 3500 rack. and has a nominal power consumption of 3500/61 nominal consumption of 9 watts. with 500vdc channel to channel isolation: 250 vdc Dimensions are (height x width x It monitors critical rotating equipment such as turbines, compressors, and pumps, and communicates monitor status and measured values to the 3500 rack and to recorder outputs for machinery protection. Configuration is performed with 3500 Rack Configuration Software; no field calibration is required.

Product Identification

  • Manufacturer: Bently Nevada.
  • Product No.: 133819-02.
  • Product type: 3500/61 RTD/TC Non-Isolated I/O.

Ordering & Configuration

  • Signal Accepts from 1 to 6 RTD or TC: transducer signals..

Electrical & Signal

  • Impedance: 10 MΩ for each lead input..
  • Power Consumption: 3500/61 Nominal consumption of 9 watts..
  • System Isolation: 500Vdc Channel to Channel Isolation: 250 Vdc.
  • RTD Current Source Value: 925 ±15 µA @ 25° C per transducer (single supply for the 4-wire RTD and two supplies for the 3-wire)..
  • Recorder: +4 to +20 mA. Values are proportional to monitor full-scale. Individual recorder values are provided for each channel. Monitor operation is unaffected by short circuits on recorder outputs..
  • Voltage Compliance (current output): 0 to +12 Vdc range across load. Load resistance is 0 to 600 Ω..
  • Resolution: 0.3662 µA per bit ±0.15% error at room temperature ±0.4% error over temperature range..
  • Signal Conditioning: Specified at +25 °C (+77 °F) unless otherwise noted..
  • Full-scale range for each: channel is set in the field via 3500 Configuration Software. No calibration is required. RTDs and TCs (except for 10Ω Copper RTDs) Resolution 1 °C or 1 °F.
  • The user can program alarm delays using: software as follows:.

Environmental Ratings

  • Temperature Monitor is: operating properly..
  • Temperature: -40°C to +85°C (-40°F to +185°F).

Physical & Mechanical

  • Dimensions: (Height x Width x.

Compliance & Certifications

  • FCC Rules. Operation is subject to the: following two conditions: l This device may not cause harmful interference. l This device must accept any interference received, including interference that may cause undesired operation..
  • EMC: European Community Directive:.
  • EMC Directive 2014/30/EU: Standards: EN 61000-6-2; Immunity for.
  • Electrical Safety: European Community Directive:.
  • LV Directive 2014/35/EU: Standards:.
  • RoHS: European Community Directive:.
  • Maritime: DNV GL rules for classification – Ships, offshore units, and high speed and light craft ABS Rules for Condition of Classification,.

Specifications

  • TCs: Type E -100 °C to +1000 °C, (-148 °F to +1832 °F)..
  • When using any of the isolated: thermocouple I/O modules (-03 or -04.
  • RTDs: 100Ω 3-wire & 4-wire platinum.
  • RTD (alpha: = 0.00385) -200° C to +850° C (-328 °F to +1562 °F). With external barriers: -50 °C to +850 °C (-122 °F to +1562 °F). 100Ω 3-wire & 4-wire platinum.
  • Platinum RTD's with: 0.00385 alphas are the worldwide industrial standard and are recommended for all applications.
  • Isolation is only required for: fault scenarios and these voltages will not be present on the I/O module inputs when a wiring or field fault occurs..
  • Monitor is communicating with: other modules in the 3500 rack..
  • Rack: ±3 °C at 25 °C (±5.4 °F at 77 °F)..
  • Rack: ±1 °C at 25 °C (±1.8 °F at 77 °F)..
  • Rack: ±2 °C at 25 °C (±3.6 °F at 77 °F). ±3 °C at 25 °C ±5.4 °F at 77 °F)..
  • Rack: ±3 °C at 25 °C ±5.4 °F at 77 °F)..
  • Rack: °C at 25 °C (±1.8 °F at 77 °F) 10 Ω Copper RTDs Resolution 1°C or 1 °F Accuracy ±3 °C at 25 °C.
  • Monitors have both under and: over alarm setpoints..
  • Alert From 1 to 60 seconds in 1 second: intervals..
  • Danger From 1 to 60 seconds in 0.5: second intervals.
  • Temprature: -30°C to +65°C (-22°F to +150 °F) when used with.
  • I/O Modules: 0°C to +65 °C (32 °F to +150 °F) when used with Internal Barrier.
  • Depth): 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in).
  • Depth): 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in).
  • Certifications (Approvals: pending).
  • Industrial Environments: EN 61000-6-4; Emissions for.
  • Part 1: l Steel Vessels Rules l Offshore Units and Structures.

Model Comparison

Compare the 3500/61 133819-02 against the closest Bently Nevada configurations below to confirm ordering options, ratings and physical interchange.

Model Product No. Product type Power Consumption Depth) Manufacturer Signal Accepts from 1 to 6 RTD or TC Impedance TCs
3500/61 133819-02 133819-02 3500/61 RTD/TC Non-Isolated I/O 3500/61 Nominal consumption of 9 watts. 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) Bently Nevada transducer signals. 10 MΩ for each lead input. Type E -100 °C to +1000 °C, (-148 °F to +1832 °F).
3500/61 163179-02 163179-02 3500/60 Temperature Monitor 3500/61 Nominal consumption of 9 watts. 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in) Bently Nevada transducer signals. 10 MΩ for each lead input. Type E -100 °C to +1000 °C, (-148 °F to +1832 °F).
3500/61-01-02 3500/61-01-02 Temperature Monitors with Recorder Outputs 3500/60 Nominal consumption of 7 watts. 3500/61 Nominal consumption of 9 watts. 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) Bently Nevada transducer signals. 10 MΩ for each lead input. Type E -100 °C to +1000 °C, (-148 °F to +1832 °F).
3500/61-03-02 3500/61-03-02 Temperature Monitors with Recorder Outputs 3500/61 Nominal consumption of 9 watts. 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) Bently Nevada transducer signals. 10 MΩ for each lead input. Type E -100 °C to +1000 °C, (-148 °F to +1832 °F).
3500/61-01-00 3500/61-01-00 Temperature Monitors with Recorder Outputs 3500/60 Nominal consumption of 7 watts. 3500/61 Nominal consumption of 9 watts. 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) Bently Nevada transducer signals. 10 MΩ for each lead input. Type E -100 °C to +1000 °C, (-148 °F to +1832 °F).
3500/61-01-01 3500/61-01-01 Temperature Monitors with Recorder Outputs 3500/60 Nominal consumption of 7 watts. 3500/61 Nominal consumption of 9 watts. — Bently Nevada transducer signals. 10 MΩ for each lead input. Type E -100 °C to +1000 °C, (-148 °F to +1832 °F).
3500/61-02-02 3500/61-02-02 Temperature Monitors with Recorder Outputs 3500/60 Nominal consumption of 7 watts. 3500/61 Nominal consumption of 9 watts. 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) Bently Nevada transducer signals. 10 MΩ for each lead input. Type E -100 °C to +1000 °C, (-148 °F to +1832 °F).

Frequently asked questions

What is the Bently Nevada 3500/61 133819-02 and what does it do?

The Bently Nevada 3500/61 133819-02 is a 3500/61 rtd/tc non-isolated i/o for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against user-programmable alarm setpoints within the 3500 rack.

What is the power consumption of the 3500/61 133819-02?

The 3500/61 133819-02 has a nominal power consumption of 3500/61 Nominal consumption of 9 watts. It draws power from the 3500 rack backplane and requires no separate supply.

What are the physical dimensions of the 3500/61 133819-02?

The 3500/61 133819-02 measures (Height x Width x and weighs It occupies a standard 3500 rack slot and installs on the rack backplane.

What standards does the 3500/61 133819-02 comply with?

The 3500/61 133819-02 complies with applicable EU directives and standards including European Community Directive:, Standards: EN 61000-6-2; Immunity for, Standards:. Review the full approvals list in the manufacturer datasheet before deployment.

How is the 3500/61 133819-02 installed and configured?

The 3500/61 133819-02 mounts in a 3500 rack rear slot and draws power from the rack backplane. Channels are configured with 3500 Rack Configuration Software; alarm setpoints and full-scale ranges are set in software with no field calibration required.

Related & compatible parts

Bently Nevada · 3500

3500/94M 119M6509-03

Bently Nevada 3500/94M 119M6509-03 3500 System Module. Power: consumption 4.6 watts max; RS232 port: (I/0) Touch controller data.

Available on request

Bently Nevada

106765-07

Genuine Bently Nevada 106765-07 interconnect cable, 7 metres, 0.5 kg, sourced as verified surplus or refurbished for faster…

In Stock

Bently Nevada · 3500/40M

129525-0025-01

Bently Nevada 129525-0025-01 Transducer Cable. Cable Length: 25 feet (7.6 metres); Assembly: Not assembled.

Available on request

Bently Nevada · 330901 / 330902 / 330908 Series

330901-02-24-10-01-00

Bently Nevada 330901-02-24-10-01-00 Proximity Probes & Sensors. Probe Length: 1.0 m; Total Length: 1.0 meter (39 in).

Available on request

News & guides for Bently Nevada

View all articles

Request a quote for this part

Part number: 3500/61 133819-02

We reply within one business day.

3500/61 133819-02 Quote reply within 1 business day