Bently Nevada Vibration Monitoring 3500
Bently Nevada 3500/61 163179-02
3500/60 Temperature Monitor
Bently Nevada 3500/61 163179-02 3500/60 Temperature Monitor. Impedance: 10 MΩ for each lead input; RTDs: 100Ω 3-wire & 4-wire platinum.
- Available on request
Availability & pricing
Pricing is available on request — send an RFQ for a same-day quote.
Technical specifications
| Manufacturer | Bently Nevada |
|---|---|
| Product No. | 163179-02 |
| Product type | 3500/60 Temperature Monitor |
| Signal Accepts from 1 to 6 RTD or TC | transducer signals. |
| Impedance | 10 MΩ for each lead input. |
| Power Consumption | 3500/61 Nominal consumption of 9 watts. |
| TCs | Type E -100 °C to +1000 °C, (-148 °F to +1832 °F). |
| When using any of the isolated | thermocouple I/O modules (-03 or -04 |
| RTDs | 100Ω 3-wire & 4-wire platinum |
| RTD (alpha | = 0.00385) -200° C to +850° C (-328 °F to +1562 °F). With external barriers: -50 °C to +850 °C (-122 °F to +1562 °F). 100Ω 3-wire & 4-wire platinum |
| Platinum RTD's with | 0.00385 alphas are the worldwide industrial standard and are recommended for all applications |
| System Isolation | 500Vdc Channel to Channel Isolation: 250 Vdc |
| Isolation is only required for | fault scenarios and these voltages will not be present on the I/O module inputs when a wiring or field fault occurs. |
| Temperature Monitor is | operating properly. |
| Monitor is communicating with | other modules in the 3500 rack. |
| RTD Current Source Value | 925 ±15 µA @ 25° C per transducer (single supply for the 4-wire RTD and two supplies for the 3-wire). |
| Recorder | +4 to +20 mA. Values are proportional to monitor full-scale. Individual recorder values are provided for each channel. Monitor operation is unaffected by short circuits on recorder outputs. |
| Voltage Compliance (current output) | 0 to +12 Vdc range across load. Load resistance is 0 to 600 Ω. |
| Resolution | 0.3662 µA per bit ±0.15% error at room temperature ±0.4% error over temperature range. |
| Signal Conditioning | Specified at +25 °C (+77 °F) unless otherwise noted. |
| Full-scale range for each | channel is set in the field via 3500 Configuration Software. No calibration is required. RTDs and TCs (except for 10Ω Copper RTDs) Resolution 1 °C or 1 °F |
| Rack | ±3 °C at 25 °C (±5.4 °F at 77 °F). |
| Rack | ±1 °C at 25 °C (±1.8 °F at 77 °F). |
| Rack | ±2 °C at 25 °C (±3.6 °F at 77 °F). ±3 °C at 25 °C ±5.4 °F at 77 °F). |
| Rack | ±3 °C at 25 °C ±5.4 °F at 77 °F). |
| Rack | °C at 25 °C (±1.8 °F at 77 °F) 10 Ω Copper RTDs Resolution 1°C or 1 °F Accuracy ±3 °C at 25 °C |
| Monitors have both under and | over alarm setpoints. |
| The user can program alarm delays using | software as follows: |
| Alert From 1 to 60 seconds in 1 second | intervals. |
| Danger From 1 to 60 seconds in 0.5 | second intervals |
| Temprature | -30°C to +65°C (-22°F to +150 °F) when used with |
| I/O Modules | 0°C to +65 °C (32 °F to +150 °F) when used with Internal Barrier |
| Temperature | -40°C to +85°C (-40°F to +185°F) |
| Dimensions | (Height x Width x |
| Depth) | 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in) |
| Module | 1 full-height front slot |
| Certifications (Approvals | pending) |
| FCC Rules. Operation is subject to the | following two conditions: l This device may not cause harmful interference. l This device must accept any interference received, including interference that may cause undesired operation. |
| EMC | European Community Directive: |
| EMC Directive 2014/30/EU | Standards: EN 61000-6-2; Immunity for |
| Industrial Environments | EN 61000-6-4; Emissions for |
| Electrical Safety | European Community Directive: |
| LV Directive 2014/35/EU | Standards: |
| RoHS | European Community Directive: |
| Maritime | DNV GL rules for classification – Ships, offshore units, and high speed and light craft ABS Rules for Condition of Classification, |
| Part 1 | l Steel Vessels Rules l Offshore Units and Structures |
Description
The Bently Nevada 3500/61 163179-02 is a 3500/60 temperature monitor for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against programmable alarm setpoints inside the 3500 rack. and has a nominal power consumption of 3500/61 nominal consumption of 9 watts. with 500vdc channel to channel isolation: 250 vdc Dimensions are (height x width x It monitors critical rotating equipment such as turbines, compressors, and pumps, and communicates monitor status and measured values to the 3500 rack and to recorder outputs for machinery protection. Configuration is performed with 3500 Rack Configuration Software; no field calibration is required.
Product Identification
- Manufacturer: Bently Nevada.
- Product No.: 163179-02.
- Product type: 3500/60 Temperature Monitor.
Ordering & Configuration
- Signal Accepts from 1 to 6 RTD or TC: transducer signals..
Electrical & Signal
- Impedance: 10 MΩ for each lead input..
- Power Consumption: 3500/61 Nominal consumption of 9 watts..
- System Isolation: 500Vdc Channel to Channel Isolation: 250 Vdc.
- RTD Current Source Value: 925 ±15 µA @ 25° C per transducer (single supply for the 4-wire RTD and two supplies for the 3-wire)..
- Recorder: +4 to +20 mA. Values are proportional to monitor full-scale. Individual recorder values are provided for each channel. Monitor operation is unaffected by short circuits on recorder outputs..
- Voltage Compliance (current output): 0 to +12 Vdc range across load. Load resistance is 0 to 600 Ω..
- Resolution: 0.3662 µA per bit ±0.15% error at room temperature ±0.4% error over temperature range..
- Signal Conditioning: Specified at +25 °C (+77 °F) unless otherwise noted..
- Full-scale range for each: channel is set in the field via 3500 Configuration Software. No calibration is required. RTDs and TCs (except for 10Ω Copper RTDs) Resolution 1 °C or 1 °F.
- The user can program alarm delays using: software as follows:.
Environmental Ratings
- Temperature Monitor is: operating properly..
- Temperature: -40°C to +85°C (-40°F to +185°F).
Physical & Mechanical
- Dimensions: (Height x Width x.
Compliance & Certifications
- FCC Rules. Operation is subject to the: following two conditions: l This device may not cause harmful interference. l This device must accept any interference received, including interference that may cause undesired operation..
- EMC: European Community Directive:.
- EMC Directive 2014/30/EU: Standards: EN 61000-6-2; Immunity for.
- Electrical Safety: European Community Directive:.
- LV Directive 2014/35/EU: Standards:.
- RoHS: European Community Directive:.
- Maritime: DNV GL rules for classification – Ships, offshore units, and high speed and light craft ABS Rules for Condition of Classification,.
Specifications
- TCs: Type E -100 °C to +1000 °C, (-148 °F to +1832 °F)..
- When using any of the isolated: thermocouple I/O modules (-03 or -04.
- RTDs: 100Ω 3-wire & 4-wire platinum.
- RTD (alpha: = 0.00385) -200° C to +850° C (-328 °F to +1562 °F). With external barriers: -50 °C to +850 °C (-122 °F to +1562 °F). 100Ω 3-wire & 4-wire platinum.
- Platinum RTD's with: 0.00385 alphas are the worldwide industrial standard and are recommended for all applications.
- Isolation is only required for: fault scenarios and these voltages will not be present on the I/O module inputs when a wiring or field fault occurs..
- Monitor is communicating with: other modules in the 3500 rack..
- Rack: ±3 °C at 25 °C (±5.4 °F at 77 °F)..
- Rack: ±1 °C at 25 °C (±1.8 °F at 77 °F)..
- Rack: ±2 °C at 25 °C (±3.6 °F at 77 °F). ±3 °C at 25 °C ±5.4 °F at 77 °F)..
- Rack: ±3 °C at 25 °C ±5.4 °F at 77 °F)..
- Rack: °C at 25 °C (±1.8 °F at 77 °F) 10 Ω Copper RTDs Resolution 1°C or 1 °F Accuracy ±3 °C at 25 °C.
- Monitors have both under and: over alarm setpoints..
- Alert From 1 to 60 seconds in 1 second: intervals..
- Danger From 1 to 60 seconds in 0.5: second intervals.
- Temprature: -30°C to +65°C (-22°F to +150 °F) when used with.
- I/O Modules: 0°C to +65 °C (32 °F to +150 °F) when used with Internal Barrier.
- Depth): 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in).
- Module: 1 full-height front slot.
- Certifications (Approvals: pending).
- Industrial Environments: EN 61000-6-4; Emissions for.
- Part 1: l Steel Vessels Rules l Offshore Units and Structures.
Model Comparison
Compare the 3500/61 163179-02 against the closest Bently Nevada configurations below to confirm ordering options, ratings and physical interchange.
| Model | Product No. | Product type | Power Consumption | Depth) | Manufacturer | Signal Accepts from 1 to 6 RTD or TC | Impedance | TCs |
|---|---|---|---|---|---|---|---|---|
| 3500/61 163179-02 | 163179-02 | 3500/60 Temperature Monitor | 3500/61 Nominal consumption of 9 watts. | 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in) | Bently Nevada | transducer signals. | 10 MΩ for each lead input. | Type E -100 °C to +1000 °C, (-148 °F to +1832 °F). |
| 3500/61 133819-02 | 133819-02 | 3500/61 RTD/TC Non-Isolated I/O | 3500/61 Nominal consumption of 9 watts. | 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) | Bently Nevada | transducer signals. | 10 MΩ for each lead input. | Type E -100 °C to +1000 °C, (-148 °F to +1832 °F). |
| 3500/61-01-02 | 3500/61-01-02 | Temperature Monitors with Recorder Outputs | 3500/60 Nominal consumption of 7 watts. 3500/61 Nominal consumption of 9 watts. | 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) | Bently Nevada | transducer signals. | 10 MΩ for each lead input. | Type E -100 °C to +1000 °C, (-148 °F to +1832 °F). |
| 3500/61-03-02 | 3500/61-03-02 | Temperature Monitors with Recorder Outputs | 3500/61 Nominal consumption of 9 watts. | 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) | Bently Nevada | transducer signals. | 10 MΩ for each lead input. | Type E -100 °C to +1000 °C, (-148 °F to +1832 °F). |
| 3500/61-01-00 | 3500/61-01-00 | Temperature Monitors with Recorder Outputs | 3500/60 Nominal consumption of 7 watts. 3500/61 Nominal consumption of 9 watts. | 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) | Bently Nevada | transducer signals. | 10 MΩ for each lead input. | Type E -100 °C to +1000 °C, (-148 °F to +1832 °F). |
| 3500/61-01-01 | 3500/61-01-01 | Temperature Monitors with Recorder Outputs | 3500/60 Nominal consumption of 7 watts. 3500/61 Nominal consumption of 9 watts. | — | Bently Nevada | transducer signals. | 10 MΩ for each lead input. | Type E -100 °C to +1000 °C, (-148 °F to +1832 °F). |
| 3500/61-02-02 | 3500/61-02-02 | Temperature Monitors with Recorder Outputs | 3500/60 Nominal consumption of 7 watts. 3500/61 Nominal consumption of 9 watts. | 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) | Bently Nevada | transducer signals. | 10 MΩ for each lead input. | Type E -100 °C to +1000 °C, (-148 °F to +1832 °F). |
Frequently asked questions
What is the Bently Nevada 3500/61 163179-02 and what does it do?
The Bently Nevada 3500/61 163179-02 is a 3500/60 temperature monitor for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against user-programmable alarm setpoints within the 3500 rack.
What is the power consumption of the 3500/61 163179-02?
The 3500/61 163179-02 has a nominal power consumption of 3500/61 Nominal consumption of 9 watts. It draws power from the 3500 rack backplane and requires no separate supply.
What are the physical dimensions of the 3500/61 163179-02?
The 3500/61 163179-02 measures (Height x Width x and weighs It occupies a standard 3500 rack slot and installs on the rack backplane.
What standards does the 3500/61 163179-02 comply with?
The 3500/61 163179-02 complies with applicable EU directives and standards including European Community Directive:, Standards: EN 61000-6-2; Immunity for, Standards:. Review the full approvals list in the manufacturer datasheet before deployment.
How is the 3500/61 163179-02 installed and configured?
The 3500/61 163179-02 mounts in a 3500 rack rear slot and draws power from the rack backplane. Channels are configured with 3500 Rack Configuration Software; alarm setpoints and full-scale ranges are set in software with no field calibration required.
Related & compatible parts
Bently Nevada · 31000 / 32000 Series
31000-16-05-00-65-03-02
Bently Nevada 31000-16-05-00-65-03-02 Proximity Probe Housing. Sulfide (PPS) thermoplastic: containing conductive fibers.
Bently Nevada · 31000 / 32000 Series
31000-16-10-00-159-00-02
Bently Nevada 31000-16-10-00-159-00-02 Proximity Probe Housing. Sulfide (PPS) thermoplastic: containing conductive fibers.
Bently Nevada · 3500/40M
125680-01
Bently Nevada 125680-01 Proximitor I/O Module. Relative Humidity: 95 %, noncondensing; Lifecycle: Current.
Bently Nevada · 3500
3500/53-03-00
Bently Nevada 3500/53-03-00 3500/53 Electronic Overspeed Detection System. Power Consumption: 8.0 watts, typical. Transducers:; ac: 250 Vac.
News & guides for Bently Nevada
Bently Nevada AnomAlert: Motor Anomaly Detection Without Sensors
TL;DR: The Bently Nevada AnomAlert is a motor anomaly detector that watches a three-phase motor through its voltage and current…
Bently Nevada 3500/06 Weatherproof Housing: Ratings, Purging and Mounting Limits
TL;DR: The weatherproof enclosure for a Bently Nevada 3500 rack is the 3500/06, not the 3500/01 — 3500/01 is the…
Bently Nevada 3500/91 EGD Gateway: Mark VIe Interface, Slots and Limits
TL;DR: The Bently Nevada 3500/91 is the EGD (Ethernet Global Data) communication gateway for a 3500 rack. It publishes rack,…
Bently Nevada 3500/50M Tachometer Module: Channels, Alarms, Spares
The 3500/50M is a two-channel speed module with no onboard relay contacts and no numeric display. What it measures, how…
Bently Nevada Orbit 60 conneX: Bidirectional DCS Interface
Bently Nevada’s Orbit 60 condition monitoring platform connects to the rest of the plant through conneX—a bidirectional digital interface that…
Bently Nevada 3500 Machinery Protection System: Specifications and Configuration
The Bently Nevada 3500 Machinery Protection System is a rack-based, modular monitoring and protection platform for rotating machines such as…
Bently Nevada 3300 XL Proximity Probe: Materials, Ratings, and Mounting
The Bently Nevada 3300 XL proximity transducer system measures radial vibration, axial position, and phase reference on rotating machinery shafts.…
Bently Nevada 32000 Metric Probe Housing: Construction and Protection Ratings
The Bently Nevada 32000 Metric Proximity Probe Housing is a mounting assembly that secures a 3300 XL proximity probe in…
