Bently Nevada Vibration Monitoring 3500

Bently Nevada 3500/65-01-00 145988-02

3500 System Module

Manufacturer: Bently Nevada Part Number: 3500/65-01-00 145988-02

Bently Nevada 3500/65-01-00 145988-02 3500 System Module. Accepts from 1 to 16 RTD or: isolated tip TC transducer signals.

  • Available on request
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

Technical specifications

Manufacturer Bently Nevada
Product No. 3500/65-01-00 145988-02
Product Type 16-Channel Temperature Monitor
I/O Module Type 01 = RTD/Isolated Tip TC with Internal Terminations
Agency Approval Option 00 = None
Dimensions ( D x W x H ) 24.18 cm x 2.44 cm x 24.13 cm
Weight 0.91 Kg
Accepts from 1 to 16 RTD or isolated tip TC transducer signals.
Impedance Greater than 1 MΩ for each lead input.
Type E -100°C to +1000°C, (-148°F to +1832°F)
Type J 0°C to +760 °C (32°F to +1400 °F)
Type K 0°C to +1370°C (32°F to +2498°F)
Type T -160°C to +400°C, ( -256°F to +752°F)
RTD -100°C to +260°C, (-148°F to +500°F) Platinum RTDs with α = 0.00385 are the worldwide industrial standard and are the recommended RTDs for all applications.
OK LED Indicates when the 3500/65 is operating properly.
Indicates when the 3500/65 is communicating with other modules in the 3500 rack.
Bypass LED Indicates when the 3500/65 monitor is in Bypass Mode.
Value 913 ± 7 µA @ 25°C per transducer (1 supply for the 4- wire RTD and 2 supplies for the 3-wire).
Signal Conditioning Specified at +25°C (+77° F). Full-scale range for each channel is set in the field via 3500 Configuration Software.
RTDs and TCs Resolution 1°C or 1 °F.
Bulkhead Rack ±3°C at +25°C (±5.4°F at +77°F).
Standard Rack ±3°C at +25°C (±5.4°F at +77°F).
Bulkhead Rack ±3°C at +25°C (±5.4°F at +77°F)
Standard Rack ±3°C at +25°C (±5.4°F at +77°F)
Sensor (used for TC measurements) ±2°C at +25°C (±3.6°F at +77°F).
You can use software configuration to set Alert and
You can use software to program alarm delays as follows:
From 1 to 60 seconds in 1-second increments.
From 1 to 60 seconds in 0.5- second increments.
Proportional values are temperature measurements used to monitor the machine. The 16-channel temperature monitor returns temperature proportional values.
Operating Temperature: -30°C to +65°C (-22°F to +150°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Dimensions (Height x
Depth) 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in)
FCC Rules. Operation is subject to the following two conditions: l This device may not cause harmful interference. l This device must accept any interference received, including interference that may cause undesired operation.
EMC European Community Directive:
EMC Directive 2014/30/EU Standards:
Electrical Safety European Community Directive:
LV Directive 2014/35/EU Standards:
RoHS European Community Directive:
ABS-Marine and Offshore Applications DNV GL Rules for Classification – Ships, Offshore Units, and High Speed and Light
Revision 5.2 with Service
Pack 2 or later *Attempting to use the 3500/65 with 3500/02 or 3500/03 software may prevent proper operation of the software. You cannot use external termination blocks with internal termination I/O modules.
When ordering I/O Modules with external terminations, you must order the external termination blocks and cables separately. When ordering I/O Modules for use with 4-Wire RTDs, order with Modification 179952-01. For further information, see the 3500/65 User

Description

The Bently Nevada 3500/65-01-00 145988-02 is a 3500 system module for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against programmable alarm setpoints inside the 3500 rack. Dimensions are (height x and the weight is 0.91 kg. It monitors critical rotating equipment such as turbines, compressors, and pumps, and communicates monitor status and measured values to the 3500 rack and to recorder outputs for machinery protection. Configuration is performed with 3500 Rack Configuration Software; no field calibration is required.

Product Identification

  • Manufacturer: Bently Nevada.
  • Product No.: 3500/65-01-00 145988-02.
  • Product Type: 16-Channel Temperature Monitor.

Ordering & Configuration

  • I/O Module Type: 01 = RTD/Isolated Tip TC with Internal Terminations.
  • Agency Approval Option: 00 = None.

Electrical & Signal

  • Impedance: Greater than 1 MΩ for each lead input..
  • Signal Conditioning: Specified at +25°C (+77° F). Full-scale range for each channel is set in the field via 3500 Configuration Software..

Environmental Ratings

  • Proportional values are temperature: measurements used to monitor the machine. The 16-channel temperature monitor returns temperature proportional values..

Physical & Mechanical

  • Dimensions ( D x W x H ): 24.18 cm x 2.44 cm x 24.13 cm.
  • Weight: 0.91 Kg.
  • Dimensions: (Height x.

Compliance & Certifications

  • FCC Rules. Operation is subject to the: following two conditions: l This device may not cause harmful interference. l This device must accept any interference received, including interference that may cause undesired operation..
  • EMC: European Community Directive:.
  • EMC Directive 2014/30/EU: Standards:.
  • Electrical Safety: European Community Directive:.
  • LV Directive 2014/35/EU: Standards:.
  • RoHS: European Community Directive:.

Specifications

  • Accepts from 1 to 16 RTD or: isolated tip TC transducer signals..
  • Type E: -100°C to +1000°C, (-148°F to +1832°F).
  • Type J: 0°C to +760 °C (32°F to +1400 °F).
  • Type K: 0°C to +1370°C (32°F to +2498°F).
  • Type T: -160°C to +400°C, ( -256°F to +752°F).
  • RTD: -100°C to +260°C, (-148°F to +500°F) Platinum RTDs with α = 0.00385 are the worldwide industrial standard and are the recommended RTDs for all applications..
  • OK LED Indicates when the 3500/65 is: operating properly..
  • Indicates when the 3500/65 is: communicating with other modules in the 3500 rack..
  • Bypass LED Indicates when the 3500/65: monitor is in Bypass Mode..
  • Value: 913 ± 7 µA @ 25°C per transducer (1 supply for the 4- wire RTD and 2 supplies for the 3-wire)..
  • RTDs and TCs: Resolution 1°C or 1 °F..
  • Bulkhead Rack: ±3°C at +25°C (±5.4°F at +77°F)..
  • Standard Rack: ±3°C at +25°C (±5.4°F at +77°F)..
  • Bulkhead Rack: ±3°C at +25°C (±5.4°F at +77°F).
  • Standard Rack: ±3°C at +25°C (±5.4°F at +77°F).
  • Sensor (used for TC: measurements) ±2°C at +25°C (±3.6°F at +77°F)..
  • You can use software: configuration to set Alert and.
  • You can use software to program: alarm delays as follows:.
  • From 1 to 60 seconds in 1-second: increments..
  • From 1 to 60 seconds in 0.5-: second increments..
  • Operating: Temperature: -30°C to +65°C (-22°F to +150°F).
  • Storage: Temperature: -40°C to +85°C (-40°F to +185°F).
  • Depth): 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in).
  • ABS-Marine and Offshore Applications: DNV GL Rules for Classification – Ships, Offshore Units, and High Speed and Light.
  • Revision 5.2: with Service.
  • Pack 2 or later: *Attempting to use the 3500/65 with 3500/02 or 3500/03 software may prevent proper operation of the software. You cannot use external termination blocks with internal termination I/O modules..
  • When ordering I/O Modules with external: terminations, you must order the external termination blocks and cables separately. When ordering I/O Modules for use with 4-Wire RTDs, order with Modification 179952-01. For further information, see the 3500/65 User.

Model Comparison

Compare the 3500/65-01-00 145988-02 against the closest Bently Nevada configurations below to confirm ordering options, ratings and physical interchange.

Model Product No. Impedance Dimensions Depth) I/O Module Type Agency Approval Option Signal Conditioning Bulkhead Rack
3500/65-01-00 145988-02 3500/65-01-00 145988-02 Greater than 1 MΩ for each lead input. (Height x 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in) 01 = RTD/Isolated Tip TC with Internal Terminations 00 = None Specified at +25°C (+77° F). Full-scale range for each channel is set in the field via 3500 Configuration Software. ±3°C at +25°C (±5.4°F at +77°F)
3500/61-01-02 3500/61-01-02 10 MΩ for each lead input. (Height x Width x 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) 01 = RTD/TC Non-isolated I/O Module Internal Terminations 0 2 = ATEX/ IECEx/ CSA (Class 1, Zone 2) — ±2 °C at 25 °C (±3.6 °F at 77 °F). ±3 °C at 25 °C ±5.4 °F at 77 °F). Standard Rack: ±3 °C at 25 °C ±5.4 °F at 77 °F).
3500/61-04-02 3500/61-04-02 10 MΩ for each lead input. (Height x Width x 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) 0 4 TC Isolated I/O Module External Terminations 0 2 = ATEX/ IECEx/ CSA (Class 1, Zone 2) — ±2 °C at 25 °C (±3.6 °F at 77 °F). ±3 °C at 25 °C ±5.4 °F at 77 °F). Standard Rack: ±3 °C at 25 °C ±5.4 °F at 77 °F).
3500/61 133819-02 133819-02 10 MΩ for each lead input. (Height x Width x 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) — — Specified at +25 °C (+77 °F) unless otherwise noted. —
3500/61 163179-02 163179-02 10 MΩ for each lead input. (Height x Width x 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in) — — Specified at +25 °C (+77 °F) unless otherwise noted. —
3500/61-01-00 3500/61-01-00 10 MΩ for each lead input. (Height x Width x 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) 01 = RTD/TC Non-isolated I/O Module Internal Terminations 00 = None Specified at +25 °C (+77 °F) unless otherwise noted. —
3500/61-01-01 3500/61-01-01 10 MΩ for each lead input. — — 01 = RTD/TC Non-isolated I/O Module Internal Terminations 0 1= CSA/NRTL/C (Class 1, Div 2) — ±2 °C at 25 °C (±3.6 °F at 77 °F). ±3 °C at 25 °C ±5.4 °F at 77 °F). Standard Rack: ±3 °C at 25 °C ±5.4 °F at 77 °F).

Frequently asked questions

What is the Bently Nevada 3500/65-01-00 145988-02 and what does it do?

The Bently Nevada 3500/65-01-00 145988-02 is a component for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against user-programmable alarm setpoints within the 3500 rack.

What are the physical dimensions of the 3500/65-01-00 145988-02?

The 3500/65-01-00 145988-02 measures (Height x and weighs 0.91 Kg It occupies a standard 3500 rack slot and installs on the rack backplane.

What standards does the 3500/65-01-00 145988-02 comply with?

The 3500/65-01-00 145988-02 complies with applicable EU directives and standards including European Community Directive:, Standards:, Standards:. Review the full approvals list in the manufacturer datasheet before deployment.

How is the 3500/65-01-00 145988-02 installed and configured?

The 3500/65-01-00 145988-02 mounts in a 3500 rack rear slot and draws power from the rack backplane. Channels are configured with 3500 Rack Configuration Software; alarm setpoints and full-scale ranges are set in software with no field calibration required.

Related & compatible parts

Bently Nevada

330303-006-50-90-00-00

Bently Nevada 330303-006-50-90-00-00 Proximity Probes & Sensors. Hardline Length: 5.0 metres (16.4 feet); Agency Approval: Not required.

Available on request

Bently Nevada · 3500/40M

129525-0025-01

Bently Nevada 129525-0025-01 Transducer Cable. Cable Length: 25 feet (7.6 metres); Assembly: Not assembled.

Available on request

Bently Nevada · 3500

3500/15 133300-01

Bently Nevada 3500/15 133300-01 Low Voltage DC Power Input Module. Input: voltage 20 to 30 Vdc; Power: supply…

Available on request

Bently Nevada · 31000 / 32000 Series

31000-29-05-00-090-01-02

Bently Nevada 31000-29-05-00-090-01-02 Proximity Probe Housing. Sulfide (PPS) thermoplastic: containing conductive fibers.

Available on request

News & guides for Bently Nevada

View all articles

Request a quote for this part

Part number: 3500/65-01-00 145988-02

We reply within one business day.

3500/65-01-00 145988-02 Quote reply within 1 business day