Bently Nevada Vibration Monitoring 3500

Bently Nevada 3500/70-01-00

3500 System Module

Manufacturer: Bently Nevada Part Number: 3500/70-01-00

Bently Nevada 3500/70-01-00 3500 System Module. Power: consumption 7.7 watts, nominal; Indicates when the: 3500/70M Recip Impulse.

  • Available on request
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

Technical specifications

Manufacturer Bently Nevada
Part Number 3500/70-01-00
Weight 0.91 kg (2.0 lb.)
Signal Accepts from 1 to 4 proximity probe signals.
Input impedance 10 kΩ acceleration input >1 MΩ velocity input
Special inhibit Contact closure 5 Vdc @ 390μA typical
Power consumption 7.7 watts, nominal
Impulse acceleration 0.51 – 11.72 mV/(m/s2) 5 – 115 mV/g
Acceleration 2 0.51 – 11.72 mV/(m/s2) 5 – 115 mV/g Recip velocity 3.54 – 22.64 mV/(mm/s) 90 – 575 mV/(in/s)
Recip velocity 3.54 – 22.64 mV/(mm/s) 90 – 575 mV/(in/s)
Indicates when the 3500/70M Recip Impulse
Velocity Monitor is operating properly.
Velocity Monitor is communicating with other modules in the 3500 rack.
Current 40 mA maximum 15 mA maximum on startup to guarantee no fold back
Output impedance 20 Ω typical operating 1000 Ω typical under fold back conditions
Protection Foldback current 15.4 to 24.9 mA
The front of each monitor has one coaxial connector for each channel.
Output Impedance 550 Ω typical Protection Each connector is shortcircuit protected.
Recorder +4 to +20 mA proportional to monitor full-scale.
Selects one static data value from each channel to be used for that channel’s recorder value.
Voltage compliance +12 Vdc maximum
Load resistance 600 Ω maximum Resolution 0.3662 µA maximum Update rate <100 millisecond
Accuracy Within ±0.05 mA. ±0.14 mA over temperature range.
Accuracy Within ± 0.33% of full-scale typical, ± 1% maximum
Exclusive of filters Band start 0 to 359° 1° resolution Band duration 1 to 360° 1° resolution
Bias filter -3 dB at 0.01 Hz 1-pole
Not OK filter -3 dB at 2400 Hz 1-pole
Static values Smoothing filter 8-revolution average value
High-pass 4-pole 80 dB per decade 24 dB per octave
Low-pass 4-pole 80 dB per decade 24 dB per octave
Accuracy Within ± 0.33% of full-scale typical ± 1% maximum
Peak static values -3 dB at 0.3 Hz 1-pole
RMS static values -3 dB at 0.1 Hz 1-pole
Additional accuracy degradation occurs when full scale signal levels are low:
Full Scale 0-0.5 ±3% typical
Full Scale 0-1.0 ±2% typical
Full Scale 0-2.0 ±1% typical
Integration filter -3 db at 0.34 Hz 1-pole
Low-Pass 1X & 2X Vector
Constant Q filter with bandwidth = ±3% running speed Q = 16.7
Low-pass 2-pole 40 dB per decade 12 dB per octave
Dimensions (Height x Width x
Depth) 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in)
Depth) 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in)
Depth) 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in)
Barrier Parameters The following parameters apply to CSA-NRTL/C and CENELEC approvals.
Parameters Vmax (PWR) = 26.80 V (SIG) = 14.05 V Imax (PWR) = 112.8 mA (SIG) = 2.82 mA Rmin (PWR) = 237.6 Ω (SIG) = 4985 Ω
Parameters (Entity) Vmax = 28.0 V Imax = 115.62 mA Rmin (PWR) = 237.6 Ω (SIG) = 4985 Ω
Parameters Vmax (PWR) = 27.25 V Imax (PWR) = 91.8 mA Rmin (PWR) = 297 Ω
Parameters (Entity) Vmax = 27.25 V Imax = 91.8 mA Rmin (PWR) = 297 Ω
Proximitor / Seismic I/O Module: -30°C to +65°C (-22°F to +149°F)
Termination) 0°C to +65°C (32°F to +149°F)
Temperature -40°C to +85°C (-40°F to +185°F) Humidity 95%

Description

The Bently Nevada 3500/70-01-00 is a 3500 system module for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against programmable alarm setpoints inside the 3500 rack. Dimensions are (height x width x and the weight is 0.91 kg (2.0 lb.). It monitors critical rotating equipment such as turbines, compressors, and pumps, and communicates monitor status and measured values to the 3500 rack and to recorder outputs for machinery protection. Configuration is performed with 3500 Rack Configuration Software; no field calibration is required.

Product Identification

  • Manufacturer: Bently Nevada.

Ordering & Configuration

  • Signal Accepts from 1 to 4 proximity: probe signals..

Electrical & Signal

  • Recorder: +4 to +20 mA proportional to monitor full-scale..
  • Accuracy: Within ±0.05 mA. ±0.14 mA over temperature range..
  • Accuracy: Within ± 0.33% of full-scale typical, ± 1% maximum.
  • Accuracy: Within ± 0.33% of full-scale typical ± 1% maximum.
  • Additional accuracy: degradation occurs when full scale signal levels are low:.

Environmental Ratings

  • Temperature: -40°C to +85°C (-40°F to +185°F) Humidity 95%.

Physical & Mechanical

  • Weight: 0.91 kg (2.0 lb.).
  • Dimensions: (Height x Width x.

Specifications

  • Part Number: 3500/70-01-00.
  • Input: impedance 10 kΩ acceleration input >1 MΩ velocity input.
  • Special inhibit Contact closure: 5 Vdc @ 390μA typical.
  • Power: consumption 7.7 watts, nominal.
  • Impulse: acceleration 0.51 – 11.72 mV/(m/s2) 5 – 115 mV/g.
  • Acceleration 2: 0.51 – 11.72 mV/(m/s2) 5 – 115 mV/g Recip velocity 3.54 – 22.64 mV/(mm/s) 90 – 575 mV/(in/s).
  • Recip velocity: 3.54 – 22.64 mV/(mm/s) 90 – 575 mV/(in/s).
  • Indicates when the: 3500/70M Recip Impulse.
  • Velocity Monitor is operating: properly..
  • Velocity Monitor is: communicating with other modules in the 3500 rack..
  • Current: 40 mA maximum 15 mA maximum on startup to guarantee no fold back.
  • Output: impedance 20 Ω typical operating 1000 Ω typical under fold back conditions.
  • Protection Foldback current: 15.4 to 24.9 mA.
  • The front of each monitor: has one coaxial connector for each channel..
  • Output: Impedance 550 Ω typical Protection Each connector is shortcircuit protected..
  • Selects one static data value: from each channel to be used for that channel’s recorder value..
  • Voltage: compliance +12 Vdc maximum.
  • Load: resistance 600 Ω maximum Resolution 0.3662 µA maximum Update rate <100 millisecond.
  • Exclusive of filters: Band start 0 to 359° 1° resolution Band duration 1 to 360° 1° resolution.
  • Bias filter: -3 dB at 0.01 Hz 1-pole.
  • Not OK filter: -3 dB at 2400 Hz 1-pole.
  • Static values Smoothing filter: 8-revolution average value.
  • High-pass: 4-pole 80 dB per decade 24 dB per octave.
  • Low-pass: 4-pole 80 dB per decade 24 dB per octave.
  • Peak static: values -3 dB at 0.3 Hz 1-pole.
  • RMS static: values -3 dB at 0.1 Hz 1-pole.
  • Full Scale 0-0.5: ±3% typical.
  • Full Scale 0-1.0: ±2% typical.
  • Full Scale 0-2.0: ±1% typical.
  • Integration: filter -3 db at 0.34 Hz 1-pole.
  • Low-Pass: 1X & 2X Vector.
  • Constant Q filter with: bandwidth = ±3% running speed Q = 16.7.
  • Low-pass: 2-pole 40 dB per decade 12 dB per octave.
  • Depth): 241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in).
  • Depth): 241.3 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in).
  • Depth): 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in).
  • Barrier Parameters: The following parameters apply to CSA-NRTL/C and CENELEC approvals..
  • Parameters: Vmax (PWR) = 26.80 V (SIG) = 14.05 V Imax (PWR) = 112.8 mA (SIG) = 2.82 mA Rmin (PWR) = 237.6 Ω (SIG) = 4985 Ω.
  • Parameters: (Entity) Vmax = 28.0 V Imax = 115.62 mA Rmin (PWR) = 237.6 Ω (SIG) = 4985 Ω.
  • Parameters: Vmax (PWR) = 27.25 V Imax (PWR) = 91.8 mA Rmin (PWR) = 297 Ω.
  • Parameters: (Entity) Vmax = 27.25 V Imax = 91.8 mA Rmin (PWR) = 297 Ω.
  • Proximitor / Seismic I/O: Module: -30°C to +65°C (-22°F to +149°F).
  • Termination): 0°C to +65°C (32°F to +149°F).

Model Comparison

Compare the 3500/70-01-00 against the closest Bently Nevada configurations below to confirm ordering options, ratings and physical interchange.

Model Dimensions Temperature Output The front of each monitor Weight Signal Accepts from 1 to 4 proximity Input Power
3500/70-01-00 (Height x Width x -40°C to +85°C (-40°F to +185°F) Humidity 95% Impedance 550 Ω typical Protection Each connector is shortcircuit protected. has one coaxial connector for each channel. 0.91 kg (2.0 lb.) probe signals. impedance 10 kΩ acceleration input >1 MΩ velocity input consumption 7.7 watts, nominal
3500/72-01-00 (Height x Width x Depth) 241.3 mm x 24.4 mm x 163.1 mm (9.50 in x 0.96 in x 6.42 in) -40°C to +85°C (-40°F to +185°F) Humidity 95% Impedance 510 Ω has one coaxial connector for each channel. — probe signals Impedance 10 kΩ Consumption 7.7 watts, nominal
3500/77-03-00 — -40°C to +85°C (-40°F to +185°F) Humidity 95%, non-condensing Impedance 550 Ω has one coaxial connector for each channel. Each connector is short-circuit protected. — — — —
3500/77M 176449-07 — — — — — — — —
3500/33-01-00 — — — — 0.70 Kg — — —
3500/61-01-00 (Height x Width x -40°C to +85°C (-40°F to +185°F) — — — — — —
3500/33-01-01 (height x widthx depth) 241 mm x 24.4 mm x 99.1 mm (9.50 in x 0.96 in x 3.90 in) — — — — — — —

Frequently asked questions

What is the Bently Nevada 3500/70-01-00 and what does it do?

The Bently Nevada 3500/70-01-00 is a component for the 3500 Machinery Protection System. It conditions field transducer signals into vibration and position measurements and compares them against user-programmable alarm setpoints within the 3500 rack.

What are the physical dimensions of the 3500/70-01-00?

The 3500/70-01-00 measures (Height x Width x and weighs 0.91 kg (2.0 lb.) It occupies a standard 3500 rack slot and installs on the rack backplane.

How is the 3500/70-01-00 installed and configured?

The 3500/70-01-00 mounts in a 3500 rack rear slot and draws power from the rack backplane. Channels are configured with 3500 Rack Configuration Software; alarm setpoints and full-scale ranges are set in software with no field calibration required.

Related & compatible parts

Bently Nevada · 3500

3500/94M-03-00-02

Bently Nevada 3500/94M-03-00-02 VGA Display Module. Display Monitor Specifications: Advantech 10” Display (ANA-D3510-100-A1).

Available on request

Bently Nevada

177230-01-01-CN

Bently Nevada 177230-01-01-CN Vibration Monitoring. Measurement Range: 0 – 25.4 mm/s (0 – 1.0 in/s); Diameter: 25.4 mm…

Available on request

Bently Nevada · 31000 / 32000 Series

31000-29-10-20-025-02-02

Bently Nevada 31000-29-10-20-025-02-02 Proximity Probe Housing. Fittings: Two 3/4-14 NPT fittings, one plug; O-Ring Material: Neoprene®.

Available on request

Bently Nevada · 3500

3500/94M-01-00-00

Bently Nevada 3500/94M-01-00-00 VGA Display Module. Display Monitor Specifications: Advantech 10” Display (ANA-D3510-100-A1).

Available on request

News & guides for Bently Nevada

View all articles

Request a quote for this part

Part number: 3500/70-01-00

We reply within one business day.

3500/70-01-00 Quote reply within 1 business day