Schneider Electric Communication Modules

Schneider Electric 140CRA31908

Ethernet RIO Drop Adaptor

Manufacturer: Schneider Electric Part Number: 140CRA31908

Genuine surplus Schneider 140CRA31908 Ethernet RIO drop adaptor for Modicon Quantum — verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Rated Voltage 5 VDC
Rated Current 1.2 A
Rated Power 6 W
Number of Ethernet Ports 3
Communication Protocol EtherNet/IP and Modbus TCP
Protection Category IP20
Operating Altitude 2000 m
Ambient Temperature Range 0 to 60 °C
Operating Humidity 80% (non-condensing)
Number of LEDs 4

Description

When an M580 system must keep controlling a legacy Modicon S908 coaxial bus, the missing link is often a single drop adaptor. The Schneider Electric 140CRA31908 Ethernet RIO Drop Adaptor bridges that gap: it collects input data and publishes it to the remote I/O head adaptor, then updates output modules with data received back. For maintenance and procurement teams keeping Quantum-era architectures running, a genuine surplus or refurbished unit is the practical route — verified against OEM datasheet markings and available without the long OEM lead time.

What This Adaptor Does in a Quantum Architecture

The 140CRA31908 is a Modicon Quantum Ethernet RIO drop adaptor with three Ethernet ports and support for two protocols, EtherNet/IP and Modbus TCP. Its documented device application is specific: it gives an M580 system the ability to control a Modicon S908 coaxial bus. Communication runs over a daisy chain loop topology on the S908 bus. Four LEDs report status — module status (Mod Status), network communication status (Net Status), RUN, and I/O — so technicians can diagnose a drop without pulling the module. The adaptor is listed as compatible with BMEP586040, BMEH584040, BMEP585040, BMEH586040, and BMEP584040. It draws 5 VDC at 1.2 A with a 6 W power rating, measures 6.6 in (167 mm) wide by 2.0 in (50 mm) high, and weighs 1.221 lb (0.554 kg).

Figure 1: Front view of the Schneider Electric 140CRA31908 Ethernet RIO Drop Adaptor showing its physical design and enclosure.

Why Genuine Surplus Fits This Module

Legacy Quantum and S908 installations are exactly where OEM lead times and list pricing hurt most. Autronexa stocks genuine surplus and refurbished units of this adaptor; each is tested against OEM datasheet specifications and functionally verified by our sourcing team before it ships. That means you compare a verified unit against a documented 5 VDC / 1.2 A / 6 W rating, three Ethernet ports, and the stated M580 compatibility list — not against a vendor’s word. Because these modules sit in control cabinets rather than on a bench, condition matters: the IP20 rating, 0 to 60 °C operating range, 80% non-condensing humidity limit, and 2000 m operating altitude all define where a replacement can go. Confirm those against your panel environment before ordering, and ask us for current availability and lead time on the specific unit.

Figure 2: Technical layout and connection details for the Schneider Electric 140CRA31908 Ethernet RIO Drop Adaptor.

Sourcing Checklist Before You Order

Match the exact part number and confirm your controller appears on the compatibility list above. Decide whether you need surplus or refurbished condition and state it on the request. Note that the module is certified to UL 508, CE, and C-tick and built to IEC 61000-4-16, CSA C22.2 No 142, and IEC 55011 — useful when your site documentation requires traceable standards. Check panel temperature and altitude against the ratings, and verify the S908 bus topology you intend to connect. Please verify current lifecycle status and availability with Autronexa before ordering. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric 140CRA31908, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. We supply genuine surplus and refurbished modules, not grey-market copies.

What condition will the adaptor arrive in?

Our default is refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus units are also available — state your preferred condition when you request a quote.

How fast can you ship the 140CRA31908?

Lead time depends on the specific unit in stock. Contact Autronexa for current lead time and availability; surplus and refurbished stock is typically ready to ship faster than OEM backorders.

Does it work with my M580 controller?

The documented compatibility list covers BMEP586040, BMEH584040, BMEP585040, BMEH586040, and BMEP584040. Its device application is to let an M580 system control a Modicon S908 coaxial bus over EtherNet/IP and Modbus TCP.

Is the 140CRA31908 still supported by Schneider Electric?

Lifecycle status is not stated in our source data. Contact Autronexa to verify OEM support status and current availability before you commit to a replacement plan.

Related & compatible parts

Schneider Electric

140NWM05000

Genuine surplus Schneider Electric 140NWM05000 DIO head-end adaptor for Modicon Quantum — verified condition, faster lead time than…

In Stock

Schneider Electric

TM3DI32K

Genuine surplus Schneider TM3DI32K discrete input module — 32 sinking/sourcing inputs, 24V DC, HE10 connector. Verified condition, ready…

In Stock

Schneider Electric

TM2DRA16RT

Genuine surplus Schneider Electric TM2DRA16RT discrete output module — 16 relay outputs, verified condition, ready to ship.

In Stock

Schneider Electric

SR2B121FU

Genuine surplus Schneider Electric SR2B121FU Zelio Logic smart relay — 12 I/O, 100-240V AC, verified condition and practical…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 140CRA31908

We reply within one business day.

140CRA31908 Quote reply within 1 business day