Schneider Electric I/O & Function Modules

Schneider Electric 140DAO84000

Output Module Modicon Quantum 16-point AC Triac

Manufacturer: Schneider Electric Part Number: 140DAO84000

Genuine surplus Schneider Electric 140DAO84000 Modicon Quantum 16-point AC Triac output module — verified condition, sourcing support.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Channels 16 points (individually isolated)
Signal type AC output, Triac (bidirectional thyristor, non-relay)
Voltage range 20 to 253 V AC
Output current 3 A rms per output (200-230 V), 4 A rms per output (24-115 V); 16 A rms per module; 4 A rms per 4-point group (continuous)
Isolation 16-channel individual isolation
Diagnostics Blown fuse, loss of field power (LED indication)
Response time 0.75 to 4.9 ms (off-on), 7.3 to 12.3 ms (on-off)
Supply voltage 5 V DC (backplane)
Bus current 350 mA @ 5 V DC
Power consumption 1.85 W + (1.1 V × total load current)
Slots required 1
Protection rating IP20
Dimensions (H×W×D) 250 × 40.34 × 103.85 mm
Weight 0.485 kg

Description

When a Modicon Quantum rack loses an AC output card, every downstream contactor and solenoid on that group stops responding. The Schneider Electric 140DAO84000 is a 16-point AC Triac output module for the Modicon Quantum platform, and Autronexa supplies it as genuine surplus with verified condition so maintenance teams can restore discrete control without waiting on an OEM allocation queue.

What This Output Module Does in a Quantum Rack

The 140DAO84000 occupies a single slot and drives 16 individually isolated AC outputs through bidirectional Triac switching rather than electromechanical relays. That distinction matters on high-cycle loads: with no contact wear, the module suits repeated switching of AC solenoids, small contactors, and pilot devices across a 20 to 253 V AC range. Each output carries 3 A rms at 200–230 V or 4 A rms at 24–115 V, with 4 A rms per four-point group continuous and 16 A rms per module. Front-panel LEDs report blown fuse and loss of field power, so a technician can localise a fault without metering every channel. Response times run 0.75 to 4.9 ms off-on and 7.3 to 12.3 ms on-off.

Figure 1: Front view of the Schneider Electric 140DAO84000 Output Module Modicon Quantum 16-point AC Triac showing its physical design and enclosure.

Technical Profile and Backplane Load

The module draws 350 mA at 5 V DC from the backplane and consumes 1.85 W plus 1.1 V times total load current, which is worth calculating before populating a full rack. It measures 250 × 40.34 × 103.85 mm and weighs 0.485 kg, with an IP20 protection rating. Individual channel isolation simplifies mixed-voltage field wiring within the stated range. Environmental operating, storage, and humidity figures are not published for this configuration, so confirm site conditions with our team if the cabinet runs hot.

Figure 2: Technical layout and connection details for the Schneider Electric 140DAO84000 Output Module Modicon Quantum 16-point AC Triac.

Surplus Sourcing for a Discontinued Module

Schneider Electric lists this module as discontinued, end of sale, last verified 2026-09. That status is exactly where surplus stock earns its place: OEM new-build supply is closed, yet installed Quantum racks keep running and still need spares. Autronexa holds refurbished units tested against OEM datasheet specifications and functionally verified by our sourcing team, giving a practical alternative to scavenging used cards from decommissioned panels. Because the part is out of production, please verify current lifecycle status and availability with Autronexa before ordering. Share your rack configuration and required quantity, and we will confirm condition, test results, and lead time.

Choosing the Right Replacement

Before ordering, match the exact part number and confirm the revision on your existing card, since Quantum I/O revisions can affect rack compatibility. Decide whether you need surplus or refurbished condition and state it in your request. Check that your field devices fall inside the 20 to 253 V AC range and that group current stays within the 4 A rms per four-point limit. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: 140DAO84000-datasheet.pdf

Frequently asked questions

Is this a genuine Schneider Electric 140DAO84000, or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before it enters stock. We supply genuine surplus and refurbished modules, not grey-market copies.

What condition will the module arrive in?

Our default condition is refurbished: each unit is tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus condition may also be available — state your preference when you request a quote.

How fast can you ship the 140DAO84000?

Lead time depends on current stock at the time of your request. Contact Autronexa for current availability and lead time; surplus and refurbished units are ready to ship once condition is confirmed.

Is the 140DAO84000 still supported by Schneider Electric?

Schneider Electric lists this module as discontinued, end of sale, last verified 2026-09. Autronexa can confirm current availability from surplus and refurbished stock.

Can this module drive 24 V AC and 230 V AC loads in the same rack?

The output range is 20 to 253 V AC with 16-channel individual isolation, so mixed voltages within that range are supported. Keep each four-point group within 4 A rms continuous and the module within 16 A rms total.

Related & compatible parts

Schneider Electric

TSXCSY84

Genuine surplus TSXCSY84 multi-axis control module for Modicon Premium — verified condition, SERCOS 2 fiber-optic motion control.

In Stock

Schneider Electric

TSXCTZ2A

Genuine surplus Schneider Electric TSXCTZ2A counter module for Modicon TSX Micro — 2 inputs, 24 V DC, verified…

In Stock

Schneider Electric

TSX3710101

Genuine surplus Schneider TSX3710101 micro PLC, verified and ready to ship. 100-240 V AC, 8 analog inputs, Modbus…

In Stock

Schneider Electric

170BAM09600

Genuine surplus Schneider Electric 170BAM09600 I/O module — 4 analog inputs, 2 outputs, verified condition and practical lead…

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 140DAO84000

We reply within one business day.

140DAO84000 Quote reply within 1 business day