Schneider Electric Communication Modules

Schneider Electric 140NOE77111C

Ethernet module

Manufacturer: Schneider Electric Part Number: 140NOE77111C

Genuine surplus Schneider 140NOE77111C Ethernet module for Modicon Quantum — verified condition, Modbus TCP/IP, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Product Line Modicon Quantum
Communication Port Protocol Ethernet Modbus TCP/IP
Transmission Rate 10/100 Mbit/s
Web Server Class C30
Current Consumption 750 mA 5 V DC
Supply Via the power supply of the rack
Protection Class IP20
Ambient Temperature 0 to 60 °C
Humidity 95 % without condensation
Certifications UL 508, cUL

Description

When a Modicon Quantum rack loses its Ethernet link, every scan cycle that depends on that data path stalls. The 140NOE77111C from Schneider Electric restores Ethernet Modbus TCP/IP communication at 10/100 Mbit/s, and Autronexa supplies it as verified genuine surplus — tested against OEM datasheet specifications and functionally verified before dispatch.

What This Module Does in a Quantum Rack

The 140NOE77111C is a standard-format Ethernet communication module for the Modicon Quantum product line. It carries the Transparent Ready concept and a Class C30 web server classification, which means the module can serve diagnostic and status pages over the network in addition to handling Modbus TCP/IP traffic. For maintenance engineers, that web server is often the first place to look when a controller stops responding: you can check link state and module health without pulling the rack apart.

The module draws 750 mA at 5 V DC and takes its supply directly from the rack power supply, so there is no separate feed to wire or fuse. That single-rail arrangement simplifies swap-outs — one less connection to verify during a replacement. The IP20 protection class suits it to cabinet-mounted installations, and the 0 to 60 °C ambient range with 95 % humidity tolerance without condensation covers typical control-room and enclosure conditions.

Figure 1: Front view of the Schneider Electric 140NOE77111C Ethernet module showing its physical design and enclosure.

Why Surplus Makes Sense for This Part

Quantum installations are long-lived, and Ethernet modules are among the first components pulled when a network segment is reworked or a rack is decommissioned. That keeps genuine units circulating in the surplus channel. Autronexa sources these modules, verifies markings and part-number cross-reference against the OEM datasheet, and functionally tests each unit before it ships. You get a verified module rather than an untested pull, and lead times are typically shorter than waiting on a factory order for an older platform. The CE marking and UL 508 / cUL certifications on the original unit remain the reference point for what the module was built to — we do not re-certify, we verify that the unit matches its original specification.

Figure 2: Technical layout and connection details for the Schneider Electric 140NOE77111C Ethernet module.

Sourcing Checklist Before You Order

Confirm the rack slot and backplane position where the module will sit, and check that your existing Quantum CPU firmware expects this communication module rather than a different Ethernet variant in the 140 series. Verify the revision level on your current unit against the replacement — mixed revisions in one rack can complicate diagnostics. Decide whether you need a tested surplus unit or a refurbished one; both are available through Autronexa, and condition is stated on the quote. If your application relies on the web server pages, confirm the Class C30 classification matches what your monitoring tools expect. Please verify current lifecycle status and availability with Autronexa before ordering, since Quantum platform support evolves. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric 140NOE77111C, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. The module you receive is a genuine Schneider Electric unit, not a copy.

What condition will the module arrive in?

Units ship as refurbished by default — tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus condition is also available; the exact condition is confirmed on your quote.

How fast can you ship the 140NOE77111C?

Contact Autronexa for current lead time. Stock levels on Quantum modules change quickly, and we confirm availability before accepting an order.

Does this module work with my existing Modicon Quantum rack?

It is a standard-format module for the Modicon Quantum line, powered from the rack supply at 750 mA 5 V DC. Confirm your CPU firmware and slot assignment with our team before ordering.

Is the 140NOE77111C still supported by Schneider Electric?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before you commit to a replacement plan.

Related & compatible parts

Schneider Electric

BMENOR2200

Genuine surplus Schneider Electric BMENOR2200 RIO head module for Modicon M580 — verified condition, faster lead time than…

In Stock

Schneider Electric

BMXDDI6402K

Genuine surplus Schneider Electric BMXDDI6402K Modicon X80 64-channel input module — verified, tested, and ready to ship from…

In Stock

Schneider Electric

140NOM21200

Genuine surplus Schneider 140NOM21200 DIO head-end adaptor for Modicon Quantum — verified, tested, and ready to ship.

In Stock

Schneider Electric

TSXPSY1610

Genuine surplus Schneider Electric TSXPSY1610 power supply for Modicon — verified condition, fast lead time, practical sourcing support.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: 140NOE77111C

We reply within one business day.

140NOE77111C Quote reply within 1 business day