Schneider Electric Communication Modules

Schneider Electric TCSESM083F2CU0

Ethernet TCP/IP managed switch

Manufacturer: Schneider Electric Part Number: TCSESM083F2CU0

Genuine surplus Schneider Electric TCSESM083F2CU0 managed switch — 6 copper + 2 fiber ports, verified condition, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Ports 6 x RJ45 10/100BASE-TX copper + 2 x 100BASE-FX multimode fiber (SC duplex)
Fiber distance 4 km (62.5/125 µm), 5 km (50/125 µm)
Protocol support Ethernet TCP/IP, SSH, HTTP, HTTPS, SNMP, RS232, LLDP, Telnet, SNTP, MRP
Redundancy HiPER ring, RSTP
Max ring nodes 50
Switching capacity 5.6 Gbps
MAC table size 8K entries
Jumbo frame 9216 bytes
Supply voltage 9.6-32V DC / 18-30V AC
Mounting 35 mm symmetrical DIN rail

Description

When a managed switch drops off the network, every downstream device goes dark with it. The TCSESM083F2CU0 from Schneider Electric is a ConneXium managed Ethernet TCP/IP switch with six copper and two multimode fiber ports — a practical replacement for maintenance teams that need a verified unit without waiting on a factory order.

What This Switch Does on the Plant Floor

The ConneXium family sits at the center of industrial network segments, and this variant combines 6 x RJ45 10/100BASE-TX copper ports with 2 x 100BASE-FX multimode fiber ports on SC duplex connectors. That mix lets you keep copper for local controllers and use fiber for the long runs between cabinets or buildings. The fiber reach is stated at 4 km over 62.5/125 µm cable and 5 km over 50/125 µm, which covers most inter-building links without extra media converters. A 5.6 Gbps switching capacity and an 8K-entry MAC table keep the unit comfortable on a segmented plant network, and jumbo frames up to 9216 bytes are supported for traffic that needs them.

Figure 1: Front view of the Schneider Electric TCSESM083F2CU0 Ethernet TCP/IP managed switch showing its physical design and enclosure.

Redundancy and Protocol Support

For maintenance engineers, the recovery behavior matters as much as the port count. This switch supports HiPER ring and RSTP redundancy, with a maximum of 50 ring nodes — enough for a typical line-level ring where a single cable break should not stop production. The protocol list includes Ethernet TCP/IP, SSH, HTTP, HTTPS, SNMP, RS232, LLDP, Telnet, SNTP and MRP, so monitoring and remote diagnostics fit into existing management workflows. The unit is marked Transparent Ready and mounts on 35 mm symmetrical DIN rail. Supply voltage is 9.6-32V DC or 18-30V AC, giving you flexibility when the panel supply is already fixed. IP20 protection means it belongs inside an enclosure, not on an open wall.

Figure 2: Technical layout and connection details for the Schneider Electric TCSESM083F2CU0 Ethernet TCP/IP managed switch.

Why a Verified Surplus Unit Fits Here

Because the ConneXium range is listed as active, buyers sometimes assume only a new distributor order will do. In practice, a tested surplus or refurbished unit gets a failed segment back online faster and at a lower cost than a factory lead time allows. Autronexa sources genuine Schneider Electric units and verifies them against OEM datasheet markings and part-number cross-reference before they ship. Each switch is functionally checked by our sourcing team, and condition is stated clearly before you commit. If you are replacing a unit that failed in service, confirm the exact model and port configuration on the existing label first — the fiber connector type and port count are the details most often mismatched. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: TCSESM083F2CU0-datasheet.pdf

Frequently asked questions

Is this TCSESM083F2CU0 a genuine Schneider Electric switch or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference before listing. The switch is genuine Schneider Electric ConneXium stock, not a grey-market copy.

What condition will the switch arrive in?

Units are supplied in the site default condition, refurbished, and are functionally checked by our sourcing team against the datasheet specifications before dispatch.

How fast can Autronexa ship this managed switch?

Contact Autronexa for current lead time and stock status. Surplus and refurbished units are typically ready to ship once condition is confirmed against your requirement.

Does the switch support ring redundancy for a line network?

Yes. The datasheet lists HiPER ring and RSTP redundancy with a maximum of 50 ring nodes, which suits typical line-level ring topologies.

Is the ConneXium range still in production?

The lifecycle status is listed as active in production, last verified 2026-09. Confirm current OEM support status with Autronexa before ordering.

Related & compatible parts

Schneider Electric

ATV310HD18N4EF

Genuine surplus Schneider ATV310HD18N4EF drive, 18.5 kW heavy duty, 380–460 V three-phase, with integrated C3 EMC filter. Verified…

In Stock

Schneider Electric

ATV930D22N4

Genuine surplus Schneider ATV930D22N4 Altivar 930 drive — 22 kW ND/18.5 kW HD, 380–480 V, tested and ready…

In Stock

Schneider Electric

ATV610D90N4

Genuine surplus ATV610D90N4 drive: 90 kW normal duty, 380...460 V three-phase, C3 EMC filter, Modbus RTU — verified…

In Stock

Schneider Electric

ATV71HC11N4

Genuine surplus ATV71HC11N4: 110 kW, 480 V, Modbus, integrated EMC filter. Verified condition, faster than OEM lead time.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TCSESM083F2CU0

We reply within one business day.

TCSESM083F2CU0 Quote reply within 1 business day