Schneider Electric I/O & Function Modules

Schneider Electric TSXCANKCDF90T

Connector

Manufacturer: Schneider Electric Part Number: TSXCANKCDF90T

Genuine surplus Schneider Electric CANopen SUB-D9 connector with line terminator — verified condition, practical lead times from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Accessory category Connection accessories
Accessory type Connector with line terminator
Destination CANopen bus
Bus type CANopen
Electrical connection 1 female connector SUB-D 9 elbowed
IP degree of protection IP20
Weight 0.046 kg
Warranty period 18 months

Description

When a CANopen bus drops offline, the fault often traces to the connector and terminator at the end of the trunk. The TSXCANKCDF90T is Schneider Electric’s CANopen SUB-D9 female connector with an integrated line terminator, a genuine surplus part that Autronexa supplies verified for engineers who need the bus back up without waiting on OEM lead times.

What This Connector Solves on a CANopen Segment

The part belongs to Schneider Electric’s CANopen range and is classed as a connection accessory for the CANopen bus. Its job is twofold: it provides the physical SUB-D 9 female interface, and it carries the line terminator that closes the bus segment correctly. The electrical connection is a single female connector, SUB-D 9, elbowed — the right-angle body helps where cabinet depth or cable routing leaves little clearance behind the port. With an IP20 degree of protection, the unit is intended for installation inside an enclosure rather than exposed plant-floor positions. At 0.046 kg, it adds negligible load to the port. For maintenance teams chasing intermittent bus errors, replacing a worn or damaged terminator connector with a verified genuine unit removes one common variable before deeper diagnostics begin.

Figure 1: Front view of the Schneider Electric TSXCANKCDF90T Connector showing its physical design and enclosure.

Why Surplus Makes Sense for This Part

Connectors and terminators are small, easily damaged items that rarely justify a full OEM order when a line is down. Autronexa holds surplus and refurbished stock of genuine Schneider Electric connection accessories, and each unit is checked against the OEM datasheet markings and part-number cross-reference before it is listed. The part carries an 18-month warranty period, which gives maintenance planners a practical window to schedule replacement without holding excessive spares. Because the connector is compact and the package is a single unit, it is straightforward to keep one on the shelf as a known-good spare. If your site runs several CANopen segments, having a verified terminator connector on hand shortens the swap-out step when a fault is traced to the bus end.

Figure 2: Technical layout and connection details for the Schneider Electric TSXCANKCDF90T Connector.

Sourcing Checks Before You Order

Before committing, confirm that the failed item is the elbowed SUB-D 9 female connector with line terminator and not a straight-body variant or a plain connector without termination. Check the port orientation in your cabinet — the elbowed form factor is a fit decision, not a cosmetic one. Confirm the IP20 rating suits the enclosure environment; if the connector sits outside a protected area, this part is not the right choice. Ask for the condition grade (surplus or refurbished) and the current lead time when you enquire. Autronexa can cross-reference the part number against your existing CANopen hardware and advise on availability. Please verify current lifecycle status and availability with Autronexa before ordering.

Practical Maintenance Note

Inspect the connector and terminator periodically for bent pins, cracked housings, or loose retention. Follow the manufacturer safety manual and your site’s lockout procedure before working on an energized bus. Do not attempt internal repairs — replace the unit with a verified spare.

Frequently asked questions

Is this TSXCANKCDF90T a genuine Schneider Electric connector or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before listing. The part is supplied as genuine surplus or refurbished stock, not a grey-market copy.

What condition will the connector arrive in?

The site default condition is Refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Confirm the specific condition grade for your order when you enquire.

How fast can Autronexa ship this CANopen connector?

Lead time depends on current stock. Contact Autronexa with the part number for verified condition and current availability; surplus units already on the shelf typically move faster than an OEM order.

Does the connector include the line terminator?

Yes. The part is specified as a connector with line terminator for the CANopen bus, with a single elbowed SUB-D 9 female connection.

Is the TSXCANKCDF90T still supported by Schneider Electric?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability before ordering.

Related & compatible parts

Schneider Electric

ATV610D18N4

Genuine surplus Schneider ATV610D18N4 drive: 18.5 kW, 380...460 V, C3 EMC filter, Modbus. Verified condition and clear lead…

In Stock

Schneider Electric

ATV610D18N4Z

Genuine surplus Schneider ATV610D18N4Z drive, 18.5 kW, 380...460 V, C3 EMC filter — verified condition and ready to…

In Stock

Schneider Electric

BMXSDO1602

Genuine surplus BMXSDO1602: 16-channel SIL3 safety discrete output module for Modicon X80 racks and M580 safety CPUs, verified…

In Stock

Schneider Electric

TM3DI16

Genuine surplus Schneider TM3DI16 discrete input module — 16 sink/source 24 VDC inputs, verified condition, ready to ship.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TSXCANKCDF90T

We reply within one business day.

TSXCANKCDF90T Quote reply within 1 business day