Schneider Electric I/O & Function Modules

Schneider Electric TWDPTO220DT

Extension module

Manufacturer: Schneider Electric Part Number: TWDPTO220DT

Genuine surplus TWDPTO220DT PTO extension module for Schneider TM2 — verified condition, faster than OEM lead time.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Supply voltage 24V (permissible 18V ~ 31.2V)
Digital inputs 4 (source or sink)
Digital outputs 2 (open collector, 24VDC, 0.1A)
Pulse outputs 2 channels, RS422 standard, 7mA/pulse
Cable type Shielded (supply may be unshielded)
Cable length < 3m
Insulation resistance > 10MΩ (1,500V for 1 minute)
Temperature derating None, 0 ~ 55°C

Description

When a motion axis loses its pulse-train output, the drive stops indexing and the line stalls. The Schneider Electric TWDPTO220DT is a TM2 PTO extension module with two pulse-train output channels, built for open-loop positioning of stepper or servo drives. Autronexa stocks genuine surplus and refurbished units, verified against OEM datasheet markings, so you can restore motion control without waiting on factory allocation.

What the TM2 PTO Module Does in a Motion Axis

The module generates a square-wave pulse train with a programmable pulse count and cycle time, and it can emit either a single train or a multi-train pulse profile. That profile is what lets a drive execute a ramp-up, run, and ramp-down sequence — or a more complex motion — without feedback from the load. Positioning stays open-loop; the position loop itself lives in the servo-drive. The module also carries four digital inputs for positioning-complete (DRV_COMPL), drive-ready (DRV_READY), origin (ORIGIN), and proximity or limit-switch (LIMIT) signals, plus two digital outputs for drive-enable (DRV_ENB) and counter-clear (DRV_CLR).

Figure 1: Front view of the Schneider Electric TWDPTO220DT Extension module showing its physical design and enclosure.

Electrical and Wiring Details Buyers Should Confirm

The module runs from a 24V supply with a permissible range of 18V to 31.2V. Digital inputs accept source or sink wiring at a normal 24VDC, closing between +15V and +30VDC; the outputs are open-collector, rated 24VDC at 0.1A, with reversed-polarity protection built in. Pulse outputs follow the RS422 standard at 7mA per pulse. For every I/O port, use shielded cable and keep the run under 3m; the supply cable may be unshielded, though shielded is recommended. Insulation resistance is stated as greater than 10MΩ at 1,500V for one minute, and there is no temperature derating from 0 to 55°C. Confirm your drive’s input type and cable schedule against these figures before ordering.

Figure 2: Technical layout and connection details for the Schneider Electric TWDPTO220DT Extension module.

Why a Verified Surplus Module Beats Waiting on Factory Allocation

Legacy TM2 motion hardware is exactly where OEM lead times bite hardest: a single extension module can hold a whole axis offline while a new-build order queues. Autronexa’s surplus and refurbished stock is tested against OEM datasheet specifications and functionally verified by our sourcing team, so the unit you receive is a genuine part with a known condition — not a grey-market pull. That means shorter lead time than factory allocation and a cost position below OEM list, without gambling on an untested board. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this a genuine Schneider Electric TWDPTO220DT, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it enters stock. The module is genuine Schneider Electric, supplied as surplus or refurbished — not a copy.

What condition will the TWDPTO220DT arrive in?

The site default condition is Refurbished: tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa if you need a surplus (unused) unit instead.

How fast can you ship the TWDPTO220DT?

Lead time depends on current stock. Contact Autronexa for the present lead time and availability on this part number.

Does the TWDPTO220DT work with my existing TM2 drive?

The module provides RS422-standard pulse outputs and four digital inputs (DRV_COMPL, DRV_READY, ORIGIN, LIMIT). Confirm your drive's input type and cable schedule against the datasheet before ordering.

Is the TWDPTO220DT still supported by Schneider Electric?

Lifecycle status is not stated in our data. Contact Autronexa to verify OEM support status and current availability.

Related & compatible parts

Schneider Electric

140DAI75300

Genuine surplus Schneider Electric 140DAI75300 Modicon Quantum 32-channel 230 V AC discrete input module — verified condition, ready…

In Stock

Schneider Electric

ATV930C22N4C

Genuine surplus Schneider ATV930C22N4C Altivar Process drive, 220 kW ND, IP00, verified condition and ready to ship.

In Stock

Schneider Electric

140CPS42400C

Genuine surplus Schneider Electric 140CPS42400C power supply — verified condition, tested, ready to ship from Autronexa.

In Stock

Schneider Electric

ABFM16S201

Genuine surplus Schneider Electric ABFM16S201 cabled connector for Modicon Quantum analogue inputs — verified condition, ready to ship.

In Stock

News & guides for Schneider Electric

View all articles

Request a quote for this part

Part number: TWDPTO220DT

We reply within one business day.

TWDPTO220DT Quote reply within 1 business day