Vibro Meter Cables & Connectors

Vibro Meter 111-402-000-013-A1-B1-C040-D000-E050-F0-G000-H05

Cable length

Manufacturer: Vibro Meter Part Number: 111-402-000-013-A1-B1-C040-D000-E050-F0-G000-H05

Genuine Vibro Meter proximity system with a 5.0 m integral cable, M10 × 1 body and IP68 transducer head — verified surplus and refurbished, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Body thread M10 × 1
Body length 40 mm
Integral cable length 5.0 m ±500 mm
Cable type FEP covered 70 Ω coaxial, Ø3.6 mm
Protection rating IP68 (transducer head)
Operating temperature −40 to +180 °C
Vibration 5 g peak, 10 to 500 Hz
Shock 15 g peak, 11 ms half sine

Description

When a proximity probe on a turbine protection chain needs replacing, cable length is often the constraint: too short and the signal conditioner cannot be reached, too long and routing becomes difficult. The 111-402-000-013-A1-B1-C040-D000-E050-F0-G000-H05 from Vibro Meter solves this with a 5.0 m integral FEP-covered coaxial cable, an M10 × 1 threaded body of 40 mm and an IP68-rated transducer head. Autronexa supplies this genuine surplus and refurbished cable-length variant to maintenance teams who need a verified replacement without waiting on OEM lead times.

What This Cable-Length Variant Provides

This Meggitt (Vibro-Meter) proximity measuring system is built around a wire coil with a Torlon tip, encapsulated in an AISI 316L stainless steel body. The 5.0 m integral cable (E050) is a 70 Ω FEP-covered coaxial cable of Ø3.6 mm, terminated with self-locking miniature coaxial connectors that should be hand-tightened until locked. The body thread is M10 × 1 with a 40 mm body length and no unthreaded section. The transducer head is rated IP68 according to IEC 60529, so it tolerates wet and dusty machine environments. With no flexible hose (G000) and no optional protection (F0), the assembly stays compact for standard routing.

Figure 1: Front view of the Vibro Meter 111-402-000-013-A1-B1-C040-D000-E050-F0-G000-H05 Cable length showing its physical design and enclosure.

Why Genuine Surplus Fits This Measurement Chain

Vibro-Meter proximity systems are specified into machinery protection and condition monitoring chains, often alongside VM600Mk2, VM600 and VibroSmart systems. When a cable is damaged or a probe fails, the priority is a genuine part with the correct length and thread — not a lookalike. Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Because these assemblies are regularly requested in this family, surplus and refurbished stock can shorten the wait compared with a factory order.

Figure 2: Technical layout and connection details for the Vibro Meter 111-402-000-013-A1-B1-C040-D000-E050-F0-G000-H05 Cable length.

Sourcing Checks Before You Order

Confirm the full configuration code, not just the base number. The suffix A1-B1-C040-D000-E050-F0-G000-H05 defines standard environment, M10 × 1 thread, 40 mm body, 5.0 m cable and no hose or protection. Check that your signal conditioner is an IQS900 or equivalent high-frequency source, since the transducer requires that input. Inspect the connector type on the existing extension cable. Finally, ask for the condition grade and current lead time before committing. Contact Autronexa with your part number for verified condition and current availability.

Frequently asked questions

Is this Vibro Meter 111-402-000-013-A1-B1-C040-D000-E050-F0-G000-H05 a genuine part or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference before it is listed. The configuration code on the label should match the full suffix shown here.

What condition will the cable-length variant arrive in?

Units are supplied as genuine surplus or refurbished. Refurbished assemblies are tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask Autronexa for the condition grade of the specific unit before ordering.

How fast can Autronexa ship this proximity measuring system?

Lead time depends on current stock. Contact Autronexa with the full part number for verified condition and current availability; surplus and refurbished stock is ready to ship when on hand.

Does the 5.0 m integral cable suit my signal conditioner?

The transducer requires a high-frequency power source from an IQS900 signal conditioner. Confirm your conditioner model and connector type with Autronexa before ordering.

Related & compatible parts

Vibro Meter

111-412-000-013-A1-B1-E010-F0-G000-H01

Genuine surplus Vibro Meter proximity measuring system with 1.0 m integral cable, M10×1 thread, and IP68 transducer head…

In Stock

Latest news & guides

View all articles

Request a quote for this part

Part number: 111-402-000-013-A1-B1-C040-D000-E050-F0-G000-H05

We reply within one business day.

111-402-000-013-A1-B1-C040-D000-E050-F0-G000-H05 Quote reply within 1 business day