B&R Servo Drives & Motors

B&R 8JSB44.ee020ffgg-0

Description: 8JSB stainless steel servo motor

Manufacturer: B&R Part Number: 8JSB44.ee020ffgg-0

Genuine surplus B&R 8JSB44.ee020ffgg-0 stainless servo motor: 918 W, IP69K, hygienic design. Verified condition and practical sourcing support from Autronexa.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Nominal power 918 W
Nominal speed 2000 rpm
Nominal torque 4.385 Nm
Maximum speed 6000 rpm
Maximum torque 19.3 Nm
Holding torque of brake 6 Nm
Mass without brake 10.2 kg
Protection rating IP69K
Recommended servo drive ACOPOS 0028

Description

When a washdown servo fails on a food or biomedical line, every hour of downtime matters. The B&R 8JSB44.ee020ffgg-0 is a stainless steel servo motor built for hygienic applications, rated 918 W at 2000 rpm with IP69K protection. Autronexa supplies genuine surplus and refurbished units with verified condition, giving maintenance teams a practical alternative to long OEM lead times.

Product Overview

The 8JSB44.ee020ffgg-0 belongs to B&R’s 8JSB series of hygienic servo motors. Its smooth 100% stainless-steel housing has a surface finish below 0.8 µm, with rounded corners and seamless transitions that prevent contaminant accumulation. For maintenance engineers, this design simplifies cleaning between production runs. The motor uses plug-in connectors and a single-cable hybrid solution, which reduces wiring complexity during replacement. A laser-engraved type plate stays legible after repeated washdowns, and the motor mounts via IM B5 flange per DIN EN 60034-7. The recommended ACOPOS servo drive is 0028, so you can confirm drive compatibility before ordering.

Figure 1: Front view of the B&R 8JSB44.ee020ffgg-0 Description: 8JSB stainless steel servo motor showing its physical design and enclosure.

Key Specifications for Service Planning

At 2000 rpm nominal speed, the motor delivers 4.385 Nm nominal torque and 918 W nominal power, drawing 2.149 A nominal current. Maximum speed reaches 6000 rpm, with maximum torque of 19.3 Nm and maximum current of 11.4 A. The holding brake provides 6 Nm, and the motor mass without brake is 10.2 kg. Thermal time constant is 74 minutes, which matters when sizing enclosures or planning duty cycles. The motor is rated S1 continuous per EN 60034-1 with insulation class F, and thermal protection uses a KTY83-110 sensor with a maximum winding temperature of 140 °C. Bearing life is stated as 20,000 h per DIN ISO 281, giving you a reference for preventive replacement intervals.

Figure 2: Technical layout and connection details for the B&R 8JSB44.ee020ffgg-0 Description: 8JSB stainless steel servo motor.

Surplus Advantage and Sourcing Guidance

Genuine surplus and refurbished 8JSB motors suit maintenance budgets because they avoid full OEM list pricing while keeping the original stainless housing and connector system. Each unit from Autronexa is verified against OEM datasheet markings and functionally checked by our sourcing team. Before ordering, confirm the exact order number, because This unit configuration includes specific winding and encoder options. Also verify whether your application needs the holding brake, since axial forces are not permitted on motors with brake or EnDat encoder. The manual lists EHEDG certification as ‘in preparation’, so check your hygiene compliance requirements. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: 8JSB44.ee020ffgg-0-datasheet.pdf

Frequently asked questions

Is this a genuine B&R 8JSB44.ee020ffgg-0, or a clone?

Autronexa verifies each unit against OEM datasheet markings and part-number cross-reference. The 8JSB44.ee020ffgg-0 is supplied as genuine surplus or refurbished stock, not as a copy.

What condition will the motor arrive in?

Units are supplied as refurbished, tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa for the specific condition grade of current stock.

How fast can you ship the 8JSB44.ee020ffgg-0?

Lead time depends on current stock. Contact Autronexa for current lead time and availability before placing your order.

Does this motor work with an ACOPOS drive?

The manufacturer lists ACOPOS drive 0028 as the recommended servo drive for the 8JSB44.ee020ffgg-0. Confirm your drive configuration and cabling with your supplier.

Related & compatible parts

B&R

8LSN43.ee030ffgg-0

Genuine surplus B&R 8LSN43.ee030ffgg-0 servo motor: 1100 W, 3000 rpm, 17.10 Nm peak torque. Verified condition and practical…

In Stock

B&R

8JSB54.ee018ffgg-0

Genuine surplus B&R 8JSB54.ee018ffgg-0 stainless steel servo motor, verified and ready for hygienic washdown applications.

In Stock

B&R

8LSP93.ee013ffgg-3

Genuine surplus B&R 8LSP93.ee013ffgg-3 servo motor: 160 Nm nominal torque, 21782 W power, terminal box connection. Verified condition,…

In Stock

B&R

8LSA63.ee022ffgg-3

Genuine surplus B&R 8LSA63.ee022ffgg-3 servo motor — 2719 W, 11.8 Nm, 2200 rpm. Verified condition, faster than OEM…

In Stock

Latest news & guides

View all articles

Request a quote for this part

Part number: 8JSB44.ee020ffgg-0

We reply within one business day.

8JSB44.ee020ffgg-0 Quote reply within 1 business day