B&R Servo Drives & Motors

B&R 8JSB54.ee030ffgg-0

Description: 8JSB stainless steel servo motor

Manufacturer: B&R Part Number: 8JSB54.ee030ffgg-0

Genuine surplus B&R 8JSB54.ee030ffgg-0 stainless servo motor: 717 W, IP69K, EHEDG-compliant housing. Verified condition and practical sourcing support.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Nominal power 717 W
Nominal speed 3000 rpm
Nominal torque 2.282 Nm
Maximum speed 6000 rpm
Maximum torque 36.9 Nm
Holding torque of brake 14.5 Nm
Mass without brake 15.7 kg
Recommended servo drive ACOPOS 0110

Description

The B&R 8JSB54.ee030ffgg-0 is a 717 W stainless-steel servo motor built for hygienic washdown duty, rated IP69K with a smooth 1.4404 housing. Engineers maintaining food or biomedical machinery choose genuine surplus units like this when OEM lead times stall and production cannot wait.

What This Hygienic Servo Motor Delivers

This 8JSB series motor pairs a 3000 rpm nominal speed with 2.282 Nm nominal torque, drawing 2.075 A at nominal load. Its five pole pairs and 1.1 Nm/A torque constant suit precise positioning tasks in clean environments. The 100% stainless-steel housing with surface finish below 0.8 µm, rounded corners and seamless transitions limits contaminant accumulation during cleaning. A self-cooled IC 400 design and IEC 60085 class F insulation support continuous S1 duty, while the KTY83-110 thermal protection guards the winding. For an engineer sizing a replacement, the recommended ACOPOS drive is 0110 — a direct match worth confirming before you order.

Figure 1: Front view of the B&R 8JSB54.ee030ffgg-0 Description: 8JSB stainless steel servo motor showing its physical design and enclosure.

Why Genuine Surplus Makes Practical Sense Here

Hygienic servo motors are rarely stocked as spares, and OEM lead times can leave a washdown line idle. Autronexa supplies genuine surplus and refurbished 8JSB units tested against OEM datasheet specifications and functionally verified by our sourcing team. The 8JSB54.ee030ffgg-0 carries a 14.5 Nm holding brake and 15.7 kg motor mass without brake, so a verified unit arrives ready to mount. Because the manual does not state lifecycle status, confirm current availability with us before committing. That is genuine parts, verified — with clear lead times rather than guesswork.

Figure 2: Technical layout and connection details for the B&R 8JSB54.ee030ffgg-0 Description: 8JSB stainless steel servo motor.

Sourcing Checks Before You Install

Match the exact order number, since the 8JSB series is IM B5 horizontal mounting only — unlike the 8JSQ variant with B14 or V18 options. Verify the connector size 1 Intercontec htec single-cable hybrid interface and 2.5 mm² cable cross-section against your existing harness. Note that axial shaft forces are not permitted on motors with a holding brake, so review your coupling arrangement. Finally, confirm the EnDat 2.2 feedback configuration (single-turn or multi-turn) suits your controller. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: 8JSB54.ee030ffgg-0-datasheet.pdf

Frequently asked questions

Is this B&R 8JSB54.ee030ffgg-0 a genuine unit or a clone?

Autronexa verifies every unit against OEM datasheet markings and part-number cross-reference. The 8JSB54.ee030ffgg-0 carries a laser-engraved type plate, and our team checks it before dispatch.

What condition will the motor arrive in?

Units are supplied refurbished by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Ask us for the specific condition grading on the unit in stock.

How fast can Autronexa ship the 8JSB54.ee030ffgg-0?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability; surplus and refurbished units are ready to ship once confirmed.

Does the 8JSB54.ee030ffgg-0 suit washdown cleaning in food production?

Yes. The housing is 1.4404 stainless steel with surface finish below 0.8 µm and IP69K protection per EN 60034-5. Cleaning must respect IP69K jet limits and be done with power removed by qualified personnel.

Is the 8JSB54.ee030ffgg-0 still supported by B&R?

The manual does not state lifecycle status. Contact Autronexa to verify OEM support status and current availability before ordering.

Related & compatible parts

B&R

8LSC83.ee015ffgg-3

Genuine surplus B&R 8LSC83.ee015ffgg-3 servo motor: 7147 W, 1500 rpm, 45.5 Nm. Verified condition and sourcing support from…

In Stock

B&R

8JSB33.ee020ffgg-0

Genuine surplus B&R 8JSB33.ee020ffgg-0 stainless steel servo motor: 426 W, 2000 rpm, IP69K hygienic design. Verified condition, sourcing…

In Stock

B&R

8JSB53.ee030ffgg-0

Genuine surplus B&R 8JSB53.ee030ffgg-0 stainless steel servo motor for hygienic applications, verified and ready to ship from Autronexa.

In Stock

B&R

8KSD82.ee011ff00-h

Genuine surplus B&R 8KSD82.ee011ff00-h servo motor: 120 Nm nominal torque, 13823 W, 1100 rpm. Verified condition, practical sourcing…

In Stock

Latest news & guides

View all articles

Request a quote for this part

Part number: 8JSB54.ee030ffgg-0

We reply within one business day.

8JSB54.ee030ffgg-0 Quote reply within 1 business day