B&R Servo Drives & Motors

B&R 8LSA83.ee015ffgg-3

Description: 8LSA three-phase synchronous servo motor

Manufacturer: B&R Part Number: 8LSA83.ee015ffgg-3

Genuine surplus B&R 8LSA83.ee015ffgg-3 servo motor: 35 Nm nominal torque, 5498 W, 1500 rpm. Verified condition, practical sourcing support.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Nominal speed 1500 rpm
Nominal torque 35 Nm
Nominal power 5498 W
Maximum torque 120 Nm
Maximum speed 3600 rpm
Nominal current 10.7 A
Mass without brake 43 kg
Recommended servo drive ACOPOS 017X

Description

The B&R 8LSA83.ee015ffgg-3 is a Description: 8LSA three-phase synchronous servo motor for industrial control and automation applications.

The B&R 8LSA83.ee015ffgg-3 is a three-phase synchronous servo motor delivering 35 Nm nominal torque at 1500 rpm, with 5498 W nominal power. Maintenance teams choose genuine surplus or refurbished units to restore motion axes quickly without waiting on OEM lead times. Autronexa supplies verified 8LSA83.ee015ffgg-3 motors with practical sourcing support.

What This Motor Delivers on the Floor

This unit is a permanent-magnet, electronically commutated synchronous motor in a self-cooled, slim and elongated design. It suits applications that demand high dynamics, positioning precision, compact size and reduced weight. The motor offers a large overload capacity, with maximum torque of 120 Nm and maximum current of 50 A for short-term peaks. Reduced cogging and optimized torque rippling support good controllability. An embedded parameter chip allows automatic drive identification, which simplifies commissioning after a swap. For maintenance engineers, the 43 kg mass without brake and the 65 kg·cm2 moment of inertia are practical data points when planning lifting equipment and checking axis dynamics.

Figure 1: Front view of the B&R 8LSA83.ee015ffgg-3 Description: 8LSA three-phase synchronous servo motor showing its physical design and enclosure.

Specs That Matter for Service Planning

Nominal current is 10.7 A, and stall current is 12.3 A, so verify drive sizing before installation. The recommended ACOPOS servo drive is 017X. The motor is rated for continuous duty S1 per EN 60034-1, with insulation class F per IEC 60085. Thermal protection uses KTY83-110 up to rev C7 or AM-PTC1000 for rev C8/C9, with maximum winding temperature 155 degC. The ACOPOS drive limits winding temperature to 110 degC with EnDat feedback or 130 degC with resolver feedback. The electrical time constant is 18.8 ms, and the thermal time constant is 50 minutes. The motor carries UL/C-UR-US listing under UL file E360421 and conforms to Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU and RoHS Directive 2011/65/EU. IP64 protection per EN 60034-5 applies, with IP65 available via an optional oil seal.

Figure 2: Technical layout and connection details for the B&R 8LSA83.ee015ffgg-3 Description: 8LSA three-phase synchronous servo motor.

Sourcing a Genuine Unit Without the Wait

When a servo axis stops, every hour of downtime counts. Autronexa focuses on genuine surplus and professionally refurbished automation components, so you get a verified unit rather than an unverified clone. Each unit is checked against OEM datasheet markings and part-number cross-reference. Refurbished motors are tested against OEM datasheet specifications and functionally verified by our sourcing team. Because this is surplus stock, lead times are typically shorter than ordering new from the OEM. The 8LSA83 frame is generation -3; B&R has not published a -4 generation document for this frame, so confirm revision compatibility with your machine builder. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: 8LSA83.ee015ffgg-3-datasheet.pdf

Frequently asked questions

Is this a genuine B&R 8LSA83.ee015ffgg-3, or a clone?

Autronexa supplies genuine surplus and refurbished B&R 8LSA83.ee015ffgg-3 motors. Each unit is verified against OEM datasheet markings and part-number cross-reference before dispatch.

What condition will the 8LSA83.ee015ffgg-3 arrive in?

Units are supplied as refurbished unless otherwise stated. Refurbished motors are tested against OEM datasheet specifications and functionally verified by our sourcing team. Contact Autronexa for the specific condition grade of current stock.

How fast can Autronexa ship the 8LSA83.ee015ffgg-3?

Lead time depends on current surplus stock. Contact Autronexa with your part number for verified condition and current availability, and we will confirm the shipping schedule.

Which servo drive is recommended for the 8LSA83.ee015ffgg-3?

The manufacturer lists the ACOPOS 017X as the recommended servo drive for the B&R 8LSA83.ee015ffgg-3. Confirm drive configuration and feedback compatibility with your system integrator.

Related & compatible parts

B&R

8LSC73.ee022ffgg-3

Genuine surplus B&R 8LSC73.ee022ffgg-3 servo motor: 6566 W, 28.5 Nm, 2200 rpm. Verified condition and practical sourcing support…

In Stock

B&R

8JSB32.ee070ffgg-0

Genuine surplus B&R 8JSB32.ee070ffgg-0 stainless servo motor: 766 W, IP69K, 7000 rpm. Verified condition and clear lead times…

In Stock

B&R

8JSB53.ee030ffgg-0

Genuine surplus B&R 8JSB53.ee030ffgg-0 stainless steel servo motor for hygienic applications, verified and ready to ship from Autronexa.

In Stock

B&R

8JSB41.ee060ffgg-0

Genuine surplus B&R 8JSB41.ee060ffgg-0 stainless steel servo motor, 809 W and IP69K, verified for hygienic washdown applications.

In Stock

Latest news & guides

View all articles

Request a quote for this part

Part number: 8LSA83.ee015ffgg-3

We reply within one business day.

8LSA83.ee015ffgg-3 Quote reply within 1 business day