FANUC Cables & Connectors

FANUC A02B-0041-C028

Supply voltage: Not applicable

Manufacturer: FANUC Part Number: A02B-0041-C028

Genuine surplus FANUC A02B-0041-C028 pre-amplifier unit for Series 10/11/12 CNC — verified condition, practical sourcing help, ready to ship.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Function Pre-amplifier unit
Series FANUC Series 10/11/12 CNC
Weight ~0.50 kg (supplier-reported)
Relative humidity 75%RH or less, no condensation
Supply voltage Not applicable
Dimensions (H×W×D) Not published as numerical table

Description

When a pre-amplifier unit fails on a running FANUC Series 10/11/12 CNC, every hour of downtime adds cost. Sourcing a genuine A02B-0041-C028 quickly and confidently keeps the machine productive. Autronexa supplies verified surplus and refurbished units with practical sourcing support.

What the A02B-0041-C028 Does in a Series 10/11/12 CNC

This unit is a pre-amplifier unit for the FANUC Series 10/11/12 CNC family. It sits in the signal chain ahead of the drive stage, conditioning low-level command signals so the control can regulate axis motion reliably. Because it is a dedicated unit rather than a generic amplifier, matching the exact order code matters: a substitute can introduce setup time, rework and unplanned cost. The unit weighs approximately 0.50 kg, so it is compact enough to handle and store as a spare without special lifting equipment. Public datasheets do not publish numerical dimensions for this preamplifier unit, so buyers should confirm the physical fit against the existing module before ordering. For maintenance teams, keeping one verified spare on the shelf is a practical way to shorten recovery time when a fault appears.

Figure 1: Front view of the FANUC A02B-0041-C028 Supply voltage: Not applicable showing its physical design and enclosure.

Environmental Limits and Their Cost Implications

FANUC publishes a relative humidity limit of 75%RH or less, with no condensation, for this unit. That figure matters in cost terms: condensation on a pre-amplifier can cause intermittent faults that are slow to diagnose and expensive in lost production. Install the unit in a cabinet that stays within this humidity range and inspect for moisture ingress during routine maintenance. Family-level references for the Series 0/00/0-Mate list an operating ambient temperature of 0 to 55 °C and a storage/transport range of −20 to 60 °C. These are family-level figures and are not confirmed for this specific order code, so treat them as guidance and verify against your machine documentation. Operating outside a verified envelope risks repeat failures, and repeat failures are the most avoidable maintenance cost.

Figure 2: Technical layout and connection details for the FANUC A02B-0041-C028 Supply voltage: Not applicable.

Genuine Surplus: Verified Condition, Practical Lead Times

For a unit like This unit, the main sourcing risk is not specification but authenticity. Aftermarket listings vary widely, and an unverified copy can cost more in commissioning time than it saves on purchase. Autronexa focuses on genuine surplus and refurbished automation components, with each unit checked against OEM datasheet markings and part-number cross-reference. Refurbished units are tested against OEM datasheet specifications and functionally verified by our sourcing team. Because this order code is not formally announced as discontinued, availability depends on aftermarket stock rather than a published end-of-service date. That makes a verified surplus source a practical alternative to waiting on a long OEM channel. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: A02B-0041-C028-datasheet.pdf

Frequently asked questions

Is the A02B-0041-C028 a genuine FANUC unit or a copy?

Autronexa verifies units against OEM datasheet markings and part-number cross-reference before they are listed. Ask for the verification details for the specific unit you are considering.

What condition will the A02B-0041-C028 arrive in?

Units are supplied as refurbished by default, tested against OEM datasheet specifications and functionally verified by our sourcing team. Surplus condition is stated per unit where applicable.

How fast can you ship the A02B-0041-C028?

Lead time depends on current stock. Contact Autronexa with your part number for verified condition and current availability before ordering.

Is the A02B-0041-C028 still supported by FANUC?

No formal end-of-service announcement was found for this order code, and it is listed in aftermarket channels. Please verify current lifecycle status and availability with Autronexa before ordering.

Related & compatible parts

FANUC · FANUC System 3/5/6 CNC

A02B-0047-C062

Genuine FANUC A02B-0047-C062 BTR cable for System 3/5/6 CNC, without reel. Verified surplus and refurbished units from Autronexa.

In Stock

FANUC

A02B-0007-0040

Genuine surplus FANUC A02B-0007-0040 I/O relay control board assembly for Series 0/6 era CNC controls, verified and ready…

In Stock

FANUC · FANUC System 3/5/6 CNC

A02B-0047-C920

Genuine surplus FANUC A02B-0047-C920 axial fan unit for System 3/5/6 CNC — verified condition, practical sourcing support, ready…

In Stock

FANUC · FANUC System 3/5/6 CNC

A02B-0047-C310

Genuine surplus FANUC A02B-0047-C310 operator panel with 7-segment LED indicators for System 3/5/6 CNC, verified and ready to…

In Stock

News & guides for FANUC

View all articles

Request a quote for this part

Part number: A02B-0041-C028

We reply within one business day.

A02B-0041-C028 Quote reply within 1 business day