Emerson Sensors & Encoders

Emerson A6500-UM

Sensors as eddy-current

Manufacturer: Emerson Part Number: A6500-UM

Genuine surplus Emerson A6500-UM Universal Measurement Card for AMS 6500 ATG, with 2 sensor channels and 5 digital inputs, verified and ready to source.

  • 12 Month
  • Refurbished
  • In Stock
Call us

Availability & pricing

Pricing is available on request — send an RFQ for a same-day quote.

5-15 days

Technical specifications

Sensor Input Channels 2 (independent or combined)
Eddy-Current Input Voltage Range -1 V to -22 V
Frequency Range 0 to 18750 Hz, attenuation <0.1 dB
Analog Output 0/4–20 mA, common ground, isolated
Digital Inputs / Outputs 5 inputs / 6 outputs
Operating Temperature -20°C to 70°C with forced cooling
Power Consumption Max. 6 W
Protection Class IP20, IEC 60529
Safety Rating SIL 2 capable (IEC 61508:2010)

Description

The Emerson A6500-UM Universal Measurement Card is a two-channel, 3U plug-in module for the AMS 6500 ATG machinery protection system, supporting eddy-current, piezoelectric, seismic, LF, Hall-effect and LVDT sensors. Maintenance and procurement teams choose genuine surplus or refurbished A6500-UM cards to keep protection systems complete without waiting on OEM lead times.

What This unit Does in an AMS 6500 ATG Rack

This unit occupies one slot in the A6500-xR System Rack and accepts two independent or combined sensor inputs. It handles shaft and case vibration, position, speed and key, and dynamic pressure measurements. Measured signals travel over the internal RS 485 bus to the A6500-CC Com Card, which converts them to Modbus RTU and Modbus TCP/IP for host systems. Analog outputs of 0/4–20 mA are electrically isolated from the system supply and share a common ground. The card also provides 5 digital inputs and 6 digital outputs, plus two pulse outputs rated 19 V to 32 V DC at 30 mA.

Figure 1: Front view of the Emerson A6500-UM Sensors as eddy-current showing its physical design and enclosure.

Key Specifications That Affect Your Installation

The eddy-current input accepts raw signal voltages from -1 V to -22 V with a frequency range of 0 to 18750 Hz at attenuation below 0.1 dB. Supply voltage is selectable at -23.25 V or -26.0 V DC, short-circuit proof, with a maximum supply load of 35 mA. The card is API 670 compliant and hot swappable, so replacement does not require a full rack shutdown. It is rated IP20 per IEC 60529 and operates from -20°C to 70°C with forced cooling, or -20°C to 55°C without. Power consumption is a maximum of 6 W, and the PCB measures 100 x 160 mm at approximately 200 g.

Figure 2: Technical layout and connection details for the Emerson A6500-UM Sensors as eddy-current.

Why Genuine Surplus Makes Sense for This Card

Emerson unit cards are often needed to restore or expand existing AMS 6500 ATG installations where the rack is already in service. Autronexa supplies genuine surplus and refurbished units verified against OEM datasheet markings and part-number cross-references. Each card is functionally checked before dispatch, and our sourcing team can confirm the exact revision and configuration for your rack. Because these are surplus and refurbished components, availability can be faster than ordering new from the OEM, and the practical condition is clearly stated before you commit. Contact Autronexa with your part number for verified condition and current availability.

📄 Download Datasheet: A6500-UM-datasheet.pdf

Frequently asked questions

Is the Emerson A6500-UM a genuine part or a clone?

Autronexa verifies every A6500-UM against OEM datasheet markings and part-number cross-references. We supply genuine surplus and refurbished units, not clones or copies.

What condition will the A6500-UM arrive in?

Units are supplied as refurbished unless otherwise stated. Each card is functionally verified by our sourcing team before dispatch, and the condition is confirmed at the time of order.

How fast can Autronexa ship the A6500-UM?

Lead time depends on current surplus stock. Contact Autronexa with your part number for verified condition and current availability, and we will confirm the shipping schedule.

Does the A6500-UM work with my existing AMS 6500 ATG rack?

The A6500-UM is a 3U, one-slot plug-in module for the A6500-xR System Rack and communicates through the A6500-CC Com Card over RS 485. Confirm your rack configuration with Autronexa before ordering.

Related & compatible parts

Emerson

Emerson CPC810-3065

Genuine surplus Emerson CPC810-3065 MultiFlex board with 16 combo inputs, 8 relay outputs, and RS485 networking for CPC…

In Stock

Emerson

EZ1080-05-00-015

Genuine surplus Emerson EZ1080-05-00-015 8mm eddy current sensor with M10x1 threads, 50mm case, and 1.5m cable — verified…

In Stock

Emerson

A6220

Genuine surplus Emerson A6220 four-channel process input monitor for CSI 6500. Verified condition and practical sourcing support from…

In Stock

Emerson

A6824

Genuine surplus Emerson A6824 ModBus and Rack Interface Module for AMS 6500 and IMR 6000 racks. Verified condition,…

In Stock

News & guides for Emerson

View all articles

Request a quote for this part

Part number: A6500-UM

We reply within one business day.

A6500-UM Quote reply within 1 business day